Babe wake up new gear skeptic just dropped

The Volumetric Calorie Density of Backpacking Food

Could CIG please add some clouds that are close to the ground so that the tips of the skyscrapers are slightly higher than some clouds?

Same with the Lorville Business District and the tallest building in New Babbage.

I'm wondering if anyone would be able to tell me what the accuracy (In percent) for stockpile calculations in WebODM is? From my research when using the volumetrics feature in Pix4d (This is having accurate GCP's) that the accuracy is within 1-3%. Is WebODM comparable or is it more inaccurate then that?

TLDR; site now looks better, has new URL https://www.rep.ninja/ and supports volumetric weight cost calculation.

Quick catch up:

Hi all, my previous post (https://www.reddit.com/r/repbudgetsneakers/comments/qjlowf/i_made_a_website_to_compare_agent_shipping_costs/) was well received, and I noticed that the site is receiving a decent amount of traffic, so I decided to make some improvements.

Volumetric weight calculation:

First of all I noticed that some agents such as CSSBuy have changed rules about how volumetric or normal weight is charged that makes volumetric weight calculation a lot more important. The feature has been added but it still optional. If you don't know the volume of your item you can just leave it blank and the calculator will work as normal. If you know the specific dimensions of your item, you can add each one in, if you only know the overall dimensions of your item, i.e. cm^(3) you can enter it into one of the boxes and leave the rest blank. Just to restate, entering package dimensions is optional and the calculator will work fine if these fields are blank.

New URL:

The old domain (https://reps-shipping-calculator.herokuapp.com/) will still work, however it is long and hard to remember off the top of your head if you are trying to direct another redditor to the site. The new URL is https://rep.ninja/.

Combined dropdown menu:

Previously there was a dropdown for every single agent to select your shipping region, this was very time consuming and annoying so I combined them all into one dropdown menu. If you believe an agent is not being checked despite it being available for your region please contact me. It is still possible to check multiple regions at once through editing the request payload, but I'm not sure if there is any real reason to do this. (Believe it or not combining these dropdowns was the most time consuming part of this update)

All countries now available:

Previously for certain agents, such as sugargoo, superbuy, wegobuy etc. only a select number of countries were available because they had to be manually added (or at least I thought they did). I managed to scrape all country data from the sites and now every country can be used with every agent. (Thank you to all the people

I want to get a murakami pillow just a small one, it’s ten bucks but just to get to my warehouse is another 35 is there a way around this or do I just give up on the silly sunflower

So I’ve got a saline spray bottle that for every 1 ml sprays 15 times. If I were to do a 2 mg to every 1 ml ratio of 3-ho-pcp how many mg of 3-ho-pcp would I be ingesting with each spray?
Sorry if this doesn’t make much sense I’m a bit wired atm.

I plan to dissolve the LSD from 5*200ug tabs into 200mL of vodka. The resulting preparation will thus be dosed at 5ug/mL, which seems like a good concentration for my planned 5-15ug/day microdosing regime; I can easily and accurately squirt 1-3mL into my mouth with a syringe.

While I've been able to find plenty of info online about the correct preparation and storage of the LSD solution, I haven't found any advice on how best to take it.

Should I just squirt the 1-3mL of liquid into my mouth and somehow hold it under my tongue for a few mins, as I would an LSD tab? That sounds difficult (and gross, given the solution will be vodka-based). Or should I just swallow it, perhaps mixed into some orange juice for taste. This sounds easier but I presume the stomach acid would destroy the LSD molecule so it might be less effective.

What's the advice for people microdosing with liquid LSD preparations?

I was thinking Quaint and Skaal in single area edits but am unsure. And completely unsure where to put Volumetric Mists

Hi, everyone!

I implemented volumetric clouds with the use of ray marching and several chained FBMs. Of course, there are already some optimizations like view depended marching length and max density check. The static clouds are based on Perlin Noises and will likely always look the same when parameters are unchanged (frequency, octaves, etc.).

I would like to implement something like a cloud caching, where the whole ray marching process is performed only once and then gets stored either in memory or even on a storage as file. How can I approach this?

What the title says

Here in the UK, I'm prescribed 8mg Subutex tablets. As I began tapering down from 16mg ( 8mg x 2) down to 2mg a day, I was able to simply cut the pills down into smaller pieces using a knife.

Problems began to arise when I began attempting to cut these 8mg pills down to anything less than 2mg doses. No one piece was ever the same size or weight and I really began to panic as I continued tapering down lower than 2mg. My only solution was volumetric dosing. Below is my guide on how I managed this technique.

HERE is an image of the bottles that I whipped up over the weekend. It's made dosing so much more manageable. I'm now down to 1.8mg. First thing in the morning, I dose 1mg, and 12 hours later in the evening, I dose the remaining 0.8mg. Every 10 days, I intend on bringing my dosage down by 0.2mg.

This website HERE took all the stress away trying to figure out the calculation to make an accurate solution. The first calculation 'How much solvent (water) do you need?' is the one I used to work everything out. I highly recommend bookmarking this site going forward for those of you that are interested.

Secondly, I bought various small glass bottles from eBay. These were used to store everything. If you're buying any, I recommend dark coloured bottles to prevent outside light from drying up any solution held within your bottle. All my bottles are stored safely at the back of my fridge. These are only brought out to dose before being put straight back into the fridge.

You also need various oral syringes of differing sizes. What I recommend is a couple 1ml, 5ml and 10ml syringes. Here in the UK, you can simply walk into your local pharmacy and ask for oral syringes free of charge. If you'd prefer to buy these elsewhere, you can pick these up for pennies over on eBay.

Last, but not least, you need some high proof alcohol. Americans recommended Everclear. For those of you outside of the UK who do not have access to Everclear, I recommend a high proof Vodka. This took me a little digging, but I eventually found a store that offers a high strength 88% Vodka. This Vodka helped to fully dissolve any pills into a fine solution.

Once I was happy with my calculation using the website posted above, I would then cut 8mg pills into small more manageable pieces (4 x 2mg). This makes it far easier to ensure these fully dissolve into your solution.

The next step is to

Have 250mg of HCL and 250mg of HBR. Want to make two separate vials for volumetric dosing. The info seems conflicting….

1 - what liquid should I use? Water? Vodka? Vegetable glycerin?

2 - do I leave it at room temp or in the fridge?

3 - can I just down it as a “shot” with a syringe? don’t want to boof.

Thanks all!

Can I disolve my powder in vodka (or something similar) to dose more precisely? I'm currently using a milligram scale, but as it is, it doesn't take much aromasin to crash estrogen. Anyone try this technique or something similar with success (my goal is to be more precise than trying to measure a few mgs on a scale).? Thanks

Basically as the title says, I’m just curious if you were to put 50mg of 2CB into 50ml of 40% vodka, could you theoretically not just vaporise the alcohol off and be left of with 2CB?

Chem was not my strongest subject tbf

You wanna know what’s so fucked up? That so many people with severe anxiety and panic (me included) can’t live without some sort of gabaergic substance running through our brains. These substances are hard to get and hard as FUCK to dose properly if your dealing with RCs. I just got out of a 9 month , high dose phenibut addiction about a month ago. After the acute withdrawals, felt fine for a week. Then out of nowhere, my brain and body started reigning hellfire on me. Became a complete agoraphobe. Lost my job. Literally panic at the thought of going outside to get the mail. Starting dealing with dissociation and dpdr, which made anxiety worse. I also have mild hppd but getting off phenibut made it worse. Plus short episodes of unwanted trippy headspaces which would cause awful panic attacks. Also have these half hour episodes of complete emotional despair that is very hard to explain but just pure, pure sadness. So went to a shrink and we tried a couple different meds that didn’t really cooperate with me.

Then one appointment he agreed to scribe to me 3 klonopin to be taken on days where shit is really hitting the fan. (Which was seemingly everyday). I was ecstatic to soon be able to feel normal for a day or two. Got the script, took one, 15 mins later I thought to myself “this shit really just isn’t fair, I actually feel okay right now”. my hppd? minimal. Panicked thoughts? gone. Overall anxiety? definitely manageable. Sadness episodes? Still come and go unfortunately, probably need an ssri or somethin for that I’m not sure. But, I feel so free of most of my problems when I’m on a properly dosed benzo. I don’t wanna be barred out, I don’t wanna be fucked up. I just wanna feel not on the brink of a crisis every second of the day. Now my ass has delved into the complicated world of rc benzos and volumetric dosing which I know very little about, but I’m really just trying to get back to my life :/

Might’ve been the wrong sub but I’m def gonna need some help on volumetric dosing

Edit: Been a moderate dose kratom addict for around two years now

Original post got locked for not having at least 5 words in my title…