My Xbox on this new shelf section, under my desk. Not even a millimetre of wiggle room. v.redd.it/ysm5d7tuhk081
πŸ‘︎ 4k
πŸ’¬︎
πŸ‘€︎ u/roshan231
πŸ“…︎ Nov 19 2021
🚨︎ report
Just discovered that during my last fell race I was just millimetres from a disaster!
πŸ‘︎ 405
πŸ’¬︎
πŸ‘€︎ u/752649
πŸ“…︎ Dec 28 2021
🚨︎ report
Heathrow wanted Β£14.80 for parking oversize vehicles. Did a circuit and got my van into the regular parking with a millimetre to spare.

Still had to pay Β£8.20 for 45 minutes though

πŸ‘︎ 1k
πŸ’¬︎
πŸ‘€︎ u/Stained_concrete
πŸ“…︎ Dec 15 2021
🚨︎ report
The Soviet AK-130 automatic naval cannon with a caliber of 130 millimetres (repost with firing)
πŸ‘︎ 4k
πŸ’¬︎
πŸ‘€︎ u/dartmaster666
πŸ“…︎ Oct 25 2021
🚨︎ report
It's always a BMW, Audi or Mercedes that drives 2 millimetres behind other cars and gets road rage if the car happens to drive at speed limit or slow down to make a maneuver

Why these cars?

πŸ‘︎ 66
πŸ’¬︎
πŸ“…︎ Dec 07 2021
🚨︎ report
The millimetre defeater
πŸ‘︎ 33
πŸ’¬︎
πŸ‘€︎ u/read-it-hehe
πŸ“…︎ Jan 12 2022
🚨︎ report
Made a diy DF64 grind reference to millimetres so that I stop wasting beans on eyeballing micro adjustments. (Adhesive tape with millimetre measurement markings will work as well.) reddit.com/gallery/rqy2v7
πŸ‘︎ 18
πŸ’¬︎
πŸ‘€︎ u/BS_MokiMoki34
πŸ“…︎ Dec 29 2021
🚨︎ report
Is this Veritasium video right or wrong? There is much discussion in the comments. Is it true that the answer is 1/c? How can it be possible? Does this work only if the resistance is 0? Also shouldn't the EM field only propagates millimetres around the conductor and so can't reach the bulb at 1 m?
πŸ‘︎ 78
πŸ’¬︎
πŸ‘€︎ u/allexj
πŸ“…︎ Nov 22 2021
🚨︎ report
Landkreuzer P. 1500 Monster, this machine is essentially the P 1000 rattes big brother Crew: 100+, Armor: 250 millimetres (9.8 in) (hull front) 200 millimetres (7.9 in) (hull sides) (800mm gun variant), Length: 25 metres (82 ft) (800mm gun variant, Maximum speed: 7 km/h (4.3 mph)
πŸ‘︎ 2k
πŸ’¬︎
πŸ“…︎ Oct 05 2021
🚨︎ report
Cannot change units from millimetres.

If I use the UN command and change the units to, say, centimetres, and then create a 10x10 square, then go to paperspace and set the viewport scale to 1:1, it will show on-screen and print out as 10 mm instead of 10 cm. I cannot for the life of me figure this one out. I am a pretty new user, so I am assuming I have done something wrong. Can anyone help?

πŸ‘︎ 4
πŸ’¬︎
πŸ‘€︎ u/DJScythe
πŸ“…︎ Jan 03 2022
🚨︎ report
My first fibreglass board I just got for Christmas, and my first time putting on pads… the back pad is a few millimetres off but it is fine
πŸ‘︎ 32
πŸ’¬︎
πŸ‘€︎ u/magicglove17
πŸ“…︎ Dec 26 2021
🚨︎ report
What is this "My Custom Ski" chart sticker telling me? What quantity is the x-axis (in millimetres) representing? These are new Salomon Aero 7 eSkin skis.
πŸ‘︎ 9
πŸ’¬︎
πŸ‘€︎ u/ionjody
πŸ“…︎ Nov 27 2021
🚨︎ report
These are Amethyst slime molds which are often less than a millimetre tall. Using a microscope lens that magnifies them by up to 20x their actual size, they look like tiny galaxies in natures neatest form.
πŸ‘︎ 1k
πŸ’¬︎
πŸ‘€︎ u/Fluid-Daydreamer
πŸ“…︎ Oct 28 2021
🚨︎ report
I am on the raiders reputation bar neighbourly but its soooo slow one daily doesn't even move it one millimetre lol is it just slow after a few levels or is it bugged it feels like its not progressing properly

..

πŸ‘︎ 42
πŸ’¬︎
πŸ‘€︎ u/dozer9891
πŸ“…︎ Oct 23 2021
🚨︎ report
Hey. Why I am able to make iPhone 13 pro screen to react even when my finger is still few millimetres of the screen. I tried few phones and I just don’t get it xd
πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/WonderB0iiiii
πŸ“…︎ Dec 22 2021
🚨︎ report
Give away: Just earned my first 400 BAN and also bought a couple. And found this banana candy, the person who guesses how long the banana is or is closest will get 50 BAN. Answer in millimetres ends in about 24 hours
πŸ‘︎ 74
πŸ’¬︎
πŸ‘€︎ u/sebastiaan_37
πŸ“…︎ Aug 28 2021
🚨︎ report
"Two-millimetre" error with clutch caused Hamilton's poor start racefans.net/2021/09/11/t…
πŸ‘︎ 240
πŸ’¬︎
πŸ‘€︎ u/lewis798
πŸ“…︎ Sep 11 2021
🚨︎ report
Brass rod advice.. would this be suitable for basic conversion things? I’m talking mainly about using them as staffs/banner poles/spears etc.. struggle with visualising when it comes to millimetres
πŸ‘︎ 20
πŸ’¬︎
πŸ‘€︎ u/jk199222
πŸ“…︎ Nov 17 2021
🚨︎ report
Slightly shaved down my beard stubble by a millimetre to make the Moustache more pronounced.
πŸ‘︎ 81
πŸ’¬︎
πŸ‘€︎ u/wiggan1989
πŸ“…︎ Nov 05 2021
🚨︎ report
[x-post from mechanical-gifs] The Soviet AK-130 automatic naval cannon with a caliber of 130 millimetres, with firing
πŸ‘︎ 200
πŸ’¬︎
πŸ‘€︎ u/Dr_JA
πŸ“…︎ Oct 25 2021
🚨︎ report
Anyone else had issues with the furniture Renovation from the Luxury DLC? 1 out of ten times I can complete a part of the renovation, every other time I sand every millimetre of the damn thing, and it does this! Only 2% completed, despite very clearly being completely sanded. (no option to flip)
πŸ‘︎ 13
πŸ’¬︎
πŸ‘€︎ u/jacalacalynm
πŸ“…︎ Nov 12 2021
🚨︎ report
Love seeing actors almost break, and in the cereal defense Danny is millimetres away from breaking at this line.
πŸ‘︎ 474
πŸ’¬︎
πŸ‘€︎ u/ItalianGuy_235
πŸ“…︎ Sep 21 2021
🚨︎ report
Jayden Okunbor slides in with a millimetre perfect grounding streamable.com/fcltfi
πŸ‘︎ 211
πŸ’¬︎
πŸ‘€︎ u/TTetron
πŸ“…︎ Aug 21 2021
🚨︎ report
Here’s a really, really tiny crewmate I drew, standing at exactly 2 millimetres tall.
πŸ‘︎ 118
πŸ’¬︎
πŸ‘€︎ u/PuzDaSnuzz
πŸ“…︎ Oct 09 2021
🚨︎ report
β€œBut no advance in wealth, no softening of manners, no reform or revolution has ever brought human equality a millimetre nearer.” - George Orwell, Nineteen Eighty-Four
πŸ‘︎ 74
πŸ’¬︎
πŸ‘€︎ u/heinz_inthecity
πŸ“…︎ Dec 10 2021
🚨︎ report
Never seen this before. It's about 1-2 millimetres in length. Picks up hairs and minuscule pieces of lint to put on its back. Jaws retract into the head so that you can barely see the tips. Eastern Norway. Anyone know what it is? v.redd.it/rcgfd33n7ji71
πŸ‘︎ 490
πŸ’¬︎
πŸ‘€︎ u/HindsightHerald
πŸ“…︎ Aug 20 2021
🚨︎ report
First few millimetres don't stick

I have no idea why this is suddenly happening and I could really use some help, I've tried levelling the bed, changing the bed temperature, cleaned the nozzle, swapped filament but it's still happening, the filament doesn't want to stick down at the very beginning and rolls with the extruder before sticking down and printing like normal Image of what's happening

πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/FallenAngelJohn
πŸ“…︎ Nov 21 2021
🚨︎ report
A rather rare miniature intaglio carved vase by Eugène Michel, France, c.1895. It's incredibly fine - some of the strokes are only fractions of a millimetre long.
πŸ‘︎ 49
πŸ’¬︎
πŸ‘€︎ u/stargatechicken
πŸ“…︎ Nov 06 2021
🚨︎ report
A rather rare miniature intaglio carved vase by Eugène Michel, France, c.1895. It's incredibly fine - some of the strokes are only fractions of a millimetre long.
πŸ‘︎ 29
πŸ’¬︎
πŸ‘€︎ u/stargatechicken
πŸ“…︎ Nov 06 2021
🚨︎ report
Just got all the available volumes in the Uk, are all volume 10’s 1 millimetre taller or is it just mine?
πŸ‘︎ 235
πŸ’¬︎
πŸ‘€︎ u/2006RedditGuy
πŸ“…︎ Oct 04 2021
🚨︎ report
Millimetres problem ? v.redd.it/n738n3v3bon71
πŸ‘︎ 29
πŸ’¬︎
πŸ“…︎ Sep 15 2021
🚨︎ report
Is this Veritasium video right or wrong? There is much discussion in the comments. Is it true that the answer is 1/c? How can it be possible? Does this work only if the resistance is 0? Also shouldn't the EM field only propagates millimetres around the conductor and so can't reach the bulb at 1 m? youtube.com/watch?v=bHIhg…
πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/allexj
πŸ“…︎ Nov 22 2021
🚨︎ report
Less than a millimetre to spare v.redd.it/2ekndr9vkf281
πŸ‘︎ 17
πŸ’¬︎
πŸ‘€︎ u/JulianCrisp
πŸ“…︎ Nov 29 2021
🚨︎ report
millimetres to inches

https://www.icloud.com/shortcuts/078288f0fa084517bdddb481082fe80c

I’m not sure who needs this, but I really wanted to make it. It calculates the inches with the fractions to the nearest 16th of an inch.

πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/nikoolpatel
πŸ“…︎ Oct 09 2021
🚨︎ report
Need urgent advice: bought a faulty item from someone online, he took this video and claimed that the battery I used was "bloated" as such caused a short-circuit, does this measurement constitute a bloated battery? Do note measurements are displayed in millimetres. v.redd.it/d927h82g9ol71
πŸ‘︎ 27
πŸ’¬︎
πŸ‘€︎ u/metzalx
πŸ“…︎ Sep 05 2021
🚨︎ report
Weird first few layers. Generally persists for a couple of millimetres up the model before it starts to just look normal. Happens regardless of profiles used
πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/TheEditor04
πŸ“…︎ Nov 05 2021
🚨︎ report
A millimetre closer and I would’ve had to say bye-bye to my front right v.redd.it/11deqct8b1181
πŸ‘︎ 9
πŸ’¬︎
πŸ‘€︎ u/AnEntireBreakfast
πŸ“…︎ Nov 21 2021
🚨︎ report
πŸ”₯ Tiny blue fungi. They are sometimes only a few millimetres high
πŸ‘︎ 750
πŸ’¬︎
πŸ‘€︎ u/MistWeaver80
πŸ“…︎ Aug 12 2021
🚨︎ report
I was millimetres from a heart attack

Just to clear things out I have severe arachnophobia and I was playing Valorant, the game was intense af and i died and wanted to look at what time it is and i look at the clock and I see a fat ass garden spider(abt 5cm with for me is A LOT) and he was zoomin' like 3 cm next to my hand(I never touched spider btw) and legit screamed for my mom who took our cat and placed him on my desk and i had to play still cuz obv an intense match but i moved my self to the side as much as i could and played still while my cat was supposed to take care of the spider but that idiot started throwing him around first in to the wall and then guess what ALMOST STRAIGHT INTO ME but I managed to move away and my mom slapped the shit out of the spider and i did a 1v3 clutch for the win but im shaking to this moment.

Thanks for reading my rant ur amazing.

πŸ‘︎ 6
πŸ’¬︎
πŸ‘€︎ u/Sznapak
πŸ“…︎ Oct 29 2021
🚨︎ report
TIL of Xenophyophorea, a group of unicellular organisms with multiple nuclei. They can range in size from a few millimetres up to 20cm in diameter and live in ocean depths from 500m to 10'600m. en.wikipedia.org/wiki/Xen…
πŸ‘︎ 79
πŸ’¬︎
πŸ“…︎ Oct 17 2021
🚨︎ report
LaLiga won't concede a millimetre to Barcelona over Messi marca.com/en/football/bar…
πŸ‘︎ 71
πŸ’¬︎
πŸ‘€︎ u/xSebban
πŸ“…︎ Aug 03 2021
🚨︎ report
what is the smaller unit of inches. like 10 centimetres is 100 millimetres. is 1 inch 10 milli inches…?
πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/lifeissoupiamf0rk
πŸ“…︎ Aug 05 2021
🚨︎ report
HMV paper model- a lot in this one. I noticed one end of dock wasn’t glued down from that last photo, then here is my drawer where I put stuff to not lose it, including my super glue stiffened thread for the crane. Finally the crane hooks only a few millimetres long reddit.com/gallery/p448dy
πŸ‘︎ 14
πŸ’¬︎
πŸ“…︎ Aug 14 2021
🚨︎ report
just one more millimetre…
πŸ‘︎ 20
πŸ’¬︎
πŸ‘€︎ u/imsoboredonreddit
πŸ“…︎ Sep 08 2021
🚨︎ report
Does anyone know of a mitre gauge that would fit a T-slot with these dimensions? Cheers (all dimensions are in Millimetres)
πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/maverickcalais
πŸ“…︎ Oct 13 2021
🚨︎ report

Please note that this site uses cookies to personalise content and adverts, to provide social media features, and to analyse web traffic. Click here for more information.