Wrote my first IC for the Q1 of Keychron https://geekhack.org/index.php?topic=113423.0Pictures: https://imgur.com/a/Iiaslms

Q1by Keychron

VIA, Gasket mount, ANSI/ISO, Hotswap, 75%, foamed, 150USD fully assembled.

In July 2021, this board will be available for purchase on Keychrons' official website.We're doing this IC to get some final feedback and interest on the board before it goes into production.

Keychron aspires to provide a high-quality typing experience with the new Q-series at an affordable price, allowing high-quality boards to reach a wider audience.

Features

• VIA support from day one out of the box
• Gasket Mount Design
• ANSI/ISO PCB options
• Hot-Swappable PCB for 5-pin mechanical switches
• Foaming
• Full CNC Aluminium Body
• Screw-In Stabilizers
• South-Facing RGB
• Additional rotary encoder, brass weight and plate option

Options

Board options

• Fully assembled: 150USD (without brass weight, knob or brass plate options) Switches will be normal gaterons
• Barebone: TBA
• Brass weight: TBA
• Knob: TBA

Case colors

• Black
• White
• Grey
• Blue (depending on interest)
• Yellow (depending on interest)

PCB/Plate

• Pre-solderd rotary encoder
• Badge/normal switch
• Aluminium plate
• Brass plate

Size

• Width: 145mm
• Lenght: 327.5mm
• Front Height: 21.6mm
• Back Height: 34.8mm
• Feet Height: 2.4mm
• Angle: 5.2 degree

InformationsThe first prototypes have arrived and are fully functional; this will be an unlimited run of the board, and real-life photos of the boards will be available later.Because we want to change the size of the board on a regular basis (the next board will be a 65% board), this will be time-limited, but if more specific information becomes available, I will update this post.

Feedback:

• We try to get POM/PC plates
• Badge and knob in other colors

Edit1 on Q1:
We postponed the pre-order release date to the end of July, and the shipping date to late August to implement all changes.
Pre-Order will be available at the end of July. Shipment is set for late August to match all the feedback we got!

!!!PRICE ANNOUNCEMENT & CHANGE!!!
Barebone 139USD
Fully assembled with double shot ABS keycaps and switches 169USD.
**That's entirely my fault; I simply messed up the exchange rate and just put 150€ as 150USD. We've now agreed to reduce the price Keychron origina

Hi r/mechmarket!

This is Candice from KeebsForAll. Our main mission is to keep products in stock at reasonable prices; and offering returns within 14 days (except lube, GB and sale items)--no questions asked. I provide free CONUS shipping on orders above $80! ($15 flat-fee shipping to Canada)

We are based in Los Angeles, CA, and we ship the orders within 24 hours. We ship worldwide (If the international shipping fee is high, feel free to contact us on Discord, and we will try to find a cheaper shipping option)! :)

KeebsForAll Website

Join KeebsForAll Discord

Things IN-STOCK:

Dear whomever it may concern,

I recently came across this. This ANSI banner is made by someone going by SiliconSwordz. I've tried reaching out to him on Deviant Art, but his last post was in 2016 and has probably moved on since then. Anyhoo, it to some degree inspired me to at least try something similar!

That being said, I have no idea where to get started. This specific banner can also be called up on your terminal (curl -L git.io/unix command) and is obviously made using ANSI escape codes. My question is how though?

Did he code it from the ground up in a linux terminal? And if so, how did he then save it to an jpg to be able to upload it to Deviant? Did he perhaps use an ANSI text editor like PauloDraw or Moebius? Note that he also uses a custom font, gohufont (a font I'm a big fan of).

Again, I'm completely new to this whole art scene. I just got really inspired by this particular artsyle. I'm also not trying to duplicate anything or profit off of someone else's work. I'm in it just to learn so I can develop my own art someday, maybe. I'm also not a professional programmer. I can do some coding in R for statistical analysis, but that's it really.

Thanks in advance!

Timestamp

1. Drop + Matt3o MT3 /dev /tty - TKL kit. Comes with original container. Used for half a year. Looking for $60 + shipping.
2. DZ60 CNC brass plate-A - Brand new and unopened in original packaging. Ordered and realized my grave mistake when I glanced the PCB. Looking for $25 + shipping.
3. Massdrop CTRL - early model (S/N 5XXX) bought from Massdrop. Used for about a year. Stock keycaps (Skylight) with Halo Clear. Comes with original box and accessories. Looking for $140 + shipping.
4. Tofu 60% E-White - No scratches and used for half a year. Can throw in the DZ60 ANSI v2 polycarbonate plate for free. Looking for $70 + shipping. Selling, on-hold

Hi folks! It is my first time posting here, hope that I got everything right. Will prioritize trades in the GTA area. Please comment before PM. Thanks for looking!

Timestamp

[EU-CH] == Switzerland :)

* [H] IBM Model MF (aka Mara aka FEXT, check on DT) serial nr 01 [W] 380 USD

* [H] IBM Beamspring 3287 restored and converted Cream [W] 1750 USD SOLD!

* [H] IBM Beamspring 3287 restored and converted Antracite [W] 1850 USD

* [H] Honeywell Hall Effect [W] 270 USD SOLD!

* [W] Will accept twint, iban (EUR, USD and CHF), cash, cryptos, wise, revolut, if it really has to be also paypal but do not want to pay their fees!!

All prices are OBestO + Shipping

I'm tentator on Deskthority.

Will post more stuff if time permits.

ID80 V2 ANSI PINK built - $320 - OBO + Shipping

ID80 V2 https://imgur.com/a/ZVu7gMI

Used for about 1 month

keycaps: EPBT KON MOMO Base + color addon

switches: Sakurios x80 lubed with Krytox 205 G0

Stabilizers: everglide pink transparent gold plated screw in stabs lubed with krytox 205 G0

feel free to PM with questions!

Thank you for reading

Timestamp

Hey there MM! I fell too deep into the rabbit hole and quickly. Also, trying raise funds for the car trouble that has been a surprise. The prices include shipping within CONUS. Please comment before PMing. Thank you!

DZ60 Gazzew Boba U4 Silent Build: Purchased from another user from MM, which led to another user, and again. I re-flashed the DZ60 firmware to work with VIA upon connecting. There is underglow RGB, not per key. The layout is Tsangan. This is a soldered build, so no hotswap. From the original listing: Built with 4mm Ilumkb TYL Polycarb plate, Gazzew Boba U4 Silent Switches, and lubed Durock stabs. It’s worth mentioning that this DZ60 is the version that has a mini usb. I’m going to include a mini usb to usb A cable with it as well as an adapter for mini USB to USB C. Also, the bottom row has a 7u spacebar with 1u keys between 1.5u keys. All you need is a 60% case and some compatible caps and you are good to go. Asking for $80.

DZ60 ANSI Bundle: Also, purchased from MM. I re-flashed the DZ60 ANSI V2 firmware to work with VIA upon connecting. This is a the DZ60RGB ANSI V2 hotswap board without arrows. Includes lubed Cherry screw-in stabilizers and aluminum plate. Asking for $50.

Alopow Resin case for 60%: in the Ocean Blue colorway that illuminates with the underglow RGB. Ideally works with the DZ60 soldered boards that have underglow, hotswap does not. Asking for $50.

Domikey SA Orange Dolch Keycaps: Purchased from MM. Personally used for 2 weeks. Details from the listing on ZFrontier: Doubleshot ABS material. SA profile. A 159-key Layout. Supports Fullsize, 96, 980, 1800，80%, 75%, 65%, 60% (FC660, 64, etc...), MX HHKB, ISO. Spacebar support for RAZER and Corsair keyboards. Deep dished F, J, and Numpad 5. Orange Accents. Asking for $55.

Ducky One 2 Mini with Cherry MX Browns: Purchased second hand. Used for a few days to see if mechs were for me, and to check out the infamous Cherry MX Browns. They are great beginner switches for someone new to see if they what they like. Comes with USB cable, blue accent keycaps, Year of the Pig space bar, and keycap puller in the original box. Asking for $60. SOLD

Timestamp

Prices are quoted to CONUS/Eur, please DM if shipping to another country.

Keyboards

Keycaps

Feel free to let me know if the prices are ok or not, these are pretty much what I paid for everything.

Please comment and t

Timestamp

Got a few things for sale most of them brand new

Aqua Bakeneko

• Shipped from cannonkeys with a small blemish in the paint layer pictured here Otherwise brand new only taken out of package for pictures

170 local pickup 190 shipped EDIT: still available SOLD FOR ASKING LOCAL

JTK Suited Assassin

• Bought off another mm user brand new unmounted for a build but ended up going with another set. Both of us never even took the keycaps out of the trays just want back how much I paid

185 local 200 shipped PENDING

Dz60 ANSI hotswap pcb + Carolina mech fr4 plate

Both brand new never used 60 local 70 shipped

Kbdfans 60% polycarbonate plate

• 2.25 u shift version lightly used

15 local. 20 shipped or 10 if bundled with the pcb SOLD for asking shipped

Local to 92647 Orange County area Priority goes to local sales

EDIT: CONUS only

DFU device connected: Atmel Corp. USB Mass Storage Device (03EB:2045:0001)

Then when I try to flash, it says

>>> dfu-programmer.exe atmega32u4 erase --force

dfu-programmer: no device present.

>>> dfu-programmer.exe atmega32u4 flash "C:\Users\gamin\Documents\Keyboard stuff\DZ60 rgb rev 2\Firmware\dztech_dz60rgb_ansi_v2_my_frist_keyboard.hex"

dfu-programmer: no device present.

>>> dfu-programmer.exe atmega32u4 reset

dfu-programmer: no device present.

Any ideas I'm using qmk 0.018 because any newer version doesn't detect the board at all.

Timestamp: http://imgur.com/a/XBoUgPV

[EU-CH] == Switzerland :)

[H]

IBM Model M SSK ANSI-US - 300$ SOLD!

Cherry G80-0662H DSA brown on beije doubleshots - 60$

IBM Model F flippers - 60$

IBM Model F caps IT - 50$

IBM Model F barrels - 40$

IBM Model M flippers - 30$

IBM Beamspring caps DE grey - 120$

All prices OBestO + Shipping and can also accept EUR or CHF.

[W]

* Revolut

* Wise

* Bitcoins

* Twint

* Satispay

or anything that not requires paying fees.

I'm tentator on Deskthority.

Will post more stuff if time permits.

I'm so sorry to clog up this website with yet another basic troublshooting problem but I cannot figure out what I'm doing wrong.

I am unable to connect my DZ60RGB ANSI V2 to QMK Toolbox. When I attempt to enter boot loader mode (reset button on back or hold esc when plugging in) my computer recognizes the board as an external drive in the file manger (on both Win and Mac). QMK Toolbox does not read it at all.

I searched a bunch of posts on here but I couldn't find anyone who mentioned this situation specifically where the board shows as a drive. So clearly the computer is recognizing something attached but QMK Toolbox does not.

Any ideas about US ANSI (not ISO!) for Tuxedo's 14" lineup?

OLD POST! PLEASE SEE RECENT WTS/WTT POST IN PROFILE!

Items that have been SOLD:

Please do not send messages via chat and comment below before sending a private message. Thanks!

Timestamp Images

PRICES REDUCED 6/5

Shipping is included/free if you buy one of the two keyboards, but buyer pays actual shipping cost otherwise. USPS Priority Mail preferred. PayPal only. CONUS preferred, but I'm willing to work with you if I can, depending on shipping time and cost. Items will only be shipped to PayPal address. I will send buyer a PayPal invoice to ensure buyer and seller protection.

Comment here first please (ban check), then message me. Please please please don't send a chat.

• Keyboards

  • Think6.5 v2 Polycarbonate - $500 shipped - SOLD
    • Excellent condition, only used for a few hours. No noticeable flaws.
    • Comes with white badge.
    • PCB is hotswap - was Mill-Maxed by me with 7305 gold sockets.
    • Entire PCB was socketed - so you can have ANSI or ISO enter, split backspace, stepped caps lock, bottom row of your choice, etc.
    • Gaskets carefully applied.
    • Will ship in original box with all original components.

• Think6.5 v2 Deep Ocean - $450 shipped - SOLD

  • Excellent condition, only used for a few hours. No noticeable flaws.
  • PCB is hotswap - was Mill-Maxed by me with 7305 gold sockets.
  • Comes with black badge (NOTE: this is not shown correctly in my time stamp image)
  • Entire PCB was socketed - so you can have ANSI or ISO enter, split backspace, stepped caps lock, bottom row of your choice, etc.
  • Will ship in original box with all original components.
  • Gaskets carefully applied.

• Think6.5 v2 Badges

  • Grey - $45 + shipping SOLD
    • In timestamp, this is mounted to the Deep Blue Think6.5 v2 in error.
  • Purple - $45 + shipping SOLD

• Switches

  • NovelKeys Blueberry Tactile Switches x70 - $40 + shipping
    • Mounted once for like a day.

• Keycaps

  • YMDK Blank Milk Fog keycaps for 60%, ANSI and ISO (this set) - $10 + shipping
    • Mounted once, excellent condition.
  • HyperX Black Pudding keycaps (this set) - $20 + shipping
    • Mounted once, excellent condition.

• Artisans

  • Systematik 8008 Key Fu - $40 + shipping
    • LNIB, never mounted

Timestamp

Hi, im selling my OG cherry sets and vintage blacks switches

Cherry SAU - 650 euro sold

Cherry HAD - 60 euro sold

83x cleaned 5pin vintage blacks - 90 euro

99x cleaned 5pin vintage blacks - 107 euro sold

- HAD has some yellowing and shine, there's also a few scratches.

- SAU set i would rate for 9/10, the only bad thing about them is that "sysRQ" started to fade a little.

prices doesn't include shipping.

I bought a GMMK Pro, and (of course) it's ANSI-only. So, while I can touch type, I'd still like to try and find some keycaps that come in both ANSI and ISO. Preferably cheap ones, since I don't have too much money at the moment.

Timestamps

If you have any kind of questions, feel free to PM me or send a comment! Shipping is not included.

Thanks for looking!

TIME STAMP

Selling everything at loss or retail besides Vintage and Novatouch.

Reduction can apply if you buy multiple items. Highly prefer to bundle. Shipping not included

Shipping of the boards can take up to few weeks, I still need to source some properly sized cardboard and packing material

Please write a 'pm' comment below the thread so I can better keep track of all conversations

Where can I buy ISO-DE Cherry Profile Keycaps or a OEM ANSI modifier kit? I cant find any

Simple question: I move between ANSI and matrix boards (MBP, Kinesis Advantage, Iris, etc.). Which is more worth it to stick with?

BOARD IS SOLD!

TIMESTAMPS!

Hey mechmarket dwellers!

I am looking to sell my TGR Police to help cover costs for some other purchases made.

Here is what is included:

TGR Police (Alice) Polycarbonate

• Copper Weight and Plate
• TGR Purple PCB (desoldered)
• TGR Carrying Case
• Additional build: TGR Brass Plate + Mechlovin' Adelais en Ciel PCB (per key RGB) built with 205g0-lubed Holy GSUS/Panda switches (BSUN housing + Halo True stems - housings are not from Drop), 65g Sprit springs lubed with 104 oil, and GMK stabs lubed with 205g0
  • Brass plate has some patina present and a few light scratches near right spacebar
• Additional photos here: https://imgur.com/a/gfDySdz
• Price = $4200 shipped in CONUS

Please do not send messages via chat and comment below before sending a private message. Thanks!

Timestamp: https://imgur.com/a/CEc3O9t

Hi, I’m selling stuff I no longer use. All prices are including shipping. Please comment before pm and no chat please, thanks. CONUS only.

1.) 5 degree build - $195

• DZ60 Ansi hotswap
• alu plate(some minor scratches from changing switches)
• pink everglide screw in stabs lubed(might need to retune)
• alpacas lubed and filmed (205g0 & kbdfans film)

2.) Susuwatari Bundle - $165

• Base mounted on 3 boards never typed for over 30 minutes on each board, no shine
• Monotone mods purchased two months ago, mounted once and no shine

3.) NK65 EE Blumen - $180

• Has a crack right above backspace from screw but isn’t visible when built or affect function.
• Blue velvet linears
• stabilizers are clipped and lubed
• Yeeti clones

Hi, I just recently bought this keyboard from the store https://kbdfans.com/products/kbdfans-dz60rgb-ansi-hot-swap-diy-kit. I've been having problems lately with "ghost clicks" or essentially the keyboard automatically submits key commands to the computer without me having pressed the keyboard. Strangely this does not happen all the time. It seems to only occur on my MacBook Pro 15-inch from 2018 with Mac OS BigSur version 11.3. It also only happens once the computer goes to sleep, the keyboard starts submitting the following keys "a" "s" "d" "e" "w" "q" or "z". I've removed the keycaps and inspected the keyboard switches just in case the pins were bent but they were not so it appears the issue might be related to the os of the computer and keyboard firmware. Do you know of any solutions? I just recently flashed my firmware with via based on some instructions customer support provided me. Again, this issue does not occur all the time. I've been using the keyboard fine on a older Macbook Pro with an older version of the Mac OS. Please help! I love the keyboard, I just can't use it once my computer goes to sleep. It starts spamming the keys I wrote above

Want to sell my excellent condition SK-8855. US ANSI layout. OEM keycaps, 100% original parts throughout and not frankenstein'd like the eBay sellers' listings.

During my few years of ownership, I ONLY used it while the palmrest was covered with saran wrap and the keys themselves were covered with a plastic key cover. As a result, the keys are in pristine condition, as are the stickers and just about anything else. There are a few minor scratches from the previous owner, but otherwise excellent. I also wiped it down gently once in a while with alcohol wipes.

Asking $170 USD OBO PayPal for the superb condition of the keyboard. Ships from Canada. Shipping can be negotiated but will probably be at buyers' expense.

Let me know if you have any questions. Cheers!

Album and Timestamp

SOLD

DZ60 RGB V2 PCB, looks like I keep getting an error code and not sure how to fix it. Layer 1 works just fine and layer 2 it seems like the "Q" key is not flashing the correct command (the Q key works and registers on layer 1, on layer 2 it was bound to "LED's off" which doesn't want to work, every other key worked as it should ) . The rest of the keys worked for me. YMMY, so If you only use layer 1 and like 99% of layer 2, you should be fine. I already purchased a second board. $40 shipped in CONUS

Timestamp

i live in the uk and wanted to see if i was able to make a ansi layout into a iso so i can have the £ sign on 3 and the other changes that iso has. i want to know so i can buy a custom keyboard

Looking for a DZ60 RGB v2 ANSI for a friend's budget build. PM please :)