If metal expands when heated why does heating up a seized bolt or screw allow a person to unbolt/unscrew it? Shouldn’t the screw or bolt be even harder to remove since it is heated and has expanded?
As the title suggests, ships spawned at Moon city have the possibility of self destruction upon respawning. I have submitted a bug report, I am sure the dev's are aware of it.
Hi there. I need someone to unbolt and remove a metal base at a storefront in Oakland, CA. See the pictures below:
Metal base: https://ibb.co/nPsQdbh
Bolts: https://ibb.co/5KD0ww6
My company took out a kiosk from the storefront and did not have time to unbolt the base. I will provide proof I work with the company and put you in touch with the store owner who wants the base taken out as well. Will pay 50$ worth of Bitcoin or Paypal for your efforts. Thank you!
I'm removing an N55 engine from an e92 platform without removing the transmission. I'm having problems separating them past about an inch or so. I came across information that says I have to remove the screws for the torque converter (instructions on removing the transmission, though). Is this necessary or can I wiggle it out as is? At this point, I'd have to mate them back together and then remove the screws etc.
Im upgrading both the fuel pumps in my long bed to newer pumps. Ive dropped both the tanks before to clean them out and put in stock wiring and it was a pain.
How hard is it to unbolt the bed and slide it back a little to get to the sending units from the top? I can see them in between the bed and the cab.
So a couple months ago I installed a new toilet and used a wax ring. Turns out I forgot to put the little plastic catch for the bolt caps on before I bolted it down. Oops.
I don't feel like pulling the toilet off and replacing the ring so I'm wondering if I could just unbolt one side at a time and slip on the missing clips. Obviously if the toilet moves at all while doing this the ring will need to be replaced but I should be able to keep it still.
It's in the ensuite so the other option is to just come up with a way to jam the caps on top of the bolts (i.e. a small piece of double sided tape in the cap to hold it in place).
Anyone had any luck/issues with unbolting one side of a toilet at a time and keeping the existing wax ring?
