Why is my AF-S bayonet mount different than everyone else's?

I bought a D3300 off of a friend and one of the lenses, an AF-S DX 18-55mm, has a broken lug on the bayonet mount. No biggie I'll just get a new one.

A few replacements and video tutorials later, I'm finding that my mounting ring is not as it should be. The screws are in different places. One of the internal lugs is in a different place. Even the nipple the spring attaches to is in a different place. The beaded sensor thing on the side even has an extra bead (8 instead of 7). All of the replacements I bought do not fit because of this, despite claiming to be compatible with my lens.

Compare the screw locations of the AF-S DX 18-55mm lens in this tutorial (image)

To the screw locations of my AF-S DX 18-55mm lens in the same orientation (image)

I have been unable to repair my lens because I cannot find a single bayonet mount replacement, or even a single YouTube or blog tutorial, that matches the rather odd setup of my particular mount.

What's going on here, and where can I find a replacement that actually works?

πŸ‘︎ 4
πŸ’¬︎
πŸ‘€︎ u/nealius
πŸ“…︎ Dec 28 2021
🚨︎ report
Legality of bayonet and mount?

Can it be done in cook county?

πŸ‘︎ 7
πŸ’¬︎
πŸ‘€︎ u/Animus-Meus
πŸ“…︎ Dec 27 2021
🚨︎ report
Picked up a M&P 15 sport 2 today. Rifle was parted and FFL did a lower transfer. Welded muzzle break, pinned stock, bayonet mount is gone and came with a 20 round pre ban mag. Today was a good day.
πŸ‘︎ 74
πŸ’¬︎
πŸ‘€︎ u/BostonsItaliano
πŸ“…︎ Oct 16 2021
🚨︎ report
PVS-7b bayonet mount not interfacing correctly

For some reason my bayonet will not clip into the nub in the mount. I've removed the backing piece so I could see that it's not clipping into it. Is there any reason that it's not clipping in correctly? It's a rhino 2 so it should work?

http://imgur.com/a/gX1iwVw

πŸ‘︎ 4
πŸ’¬︎
πŸ‘€︎ u/PenisPoonisher
πŸ“…︎ Nov 22 2021
🚨︎ report
Anyone know what lens mount this is? It’s rather maddening trying to photograph , but it’s 3 tabs on the bayonet,and smaller than most SLR mounts that I’m familiar with..a friend guessed nikon s mount, but based on images I’ve seen it doesn’t look right. reddit.com/gallery/rbuita
πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/jaketfa
πŸ“…︎ Dec 08 2021
🚨︎ report
Canon 7d2 & 100-400 bayonet mount replacement

Hey Guys,
One of my little gremlin family members knocked over my tripod the other day, causing my 7d2 and 100-400mk2 to hit the floor. Discovered that the impact had bent and /or cracked the mounting rings (?) on both the camera body and the lens. Have been looking around as to whether this was something I could fix myself, or if it's easier to pay someone else to do it?
Any thoughts/advice?

πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/Naychaboy
πŸ“…︎ Dec 09 2021
🚨︎ report
[WTS] repost: more ak parts, trigger , trunnion, bayonet, Adapters, light mount $1234 [NV]
πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/Taoizm762
πŸ“…︎ Nov 28 2021
🚨︎ report
Debating if I would ever mount a bayonet.
πŸ‘︎ 58
πŸ’¬︎
πŸ‘€︎ u/ck-dg
πŸ“…︎ Sep 27 2021
🚨︎ report
Got tired of accidentally disconnecting my bayonet mount. Perfect fit. reddit.com/gallery/pp484l
πŸ‘︎ 16
πŸ’¬︎
πŸ‘€︎ u/rifenbug
πŸ“…︎ Sep 16 2021
🚨︎ report
Where can I find the proper XF Lens Bayonet Mount Ring screws?

I stripped 2 of the screws while repairing my lens. (The XF 16-80mm OIS). I’m trying to find the proper sized 4 silver screws that hold the mounting ring onto the lens. But I can’t find anything. I don’t want to send my lens to Fuji because currently this is the only lens I have. If anyone has the specs for the screws or a place where I can find them, please lmk!

πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/Schidlers_Fist
πŸ“…︎ Nov 10 2021
🚨︎ report
Bayonet mounts/lugs legal on a ct other?
πŸ‘︎ 2
πŸ’¬︎
πŸ“…︎ Oct 08 2021
🚨︎ report
Experimental M/1917 Danish bayonet, based on the M1915 design but without a muzzle ring. It however is contained into a special scabbard that can be used to mount the bayonet along it on the gun, allowing some extra range. Cherry on top, it was designed by Bang reddit.com/gallery/pu0ous
πŸ‘︎ 21
πŸ’¬︎
πŸ‘€︎ u/8x50mmR
πŸ“…︎ Sep 23 2021
🚨︎ report
I ran into a old lens that has a Bayonet mount. Any idea how to use it on a Fujifilm X-T4? I assume I need an adapter. Can you suggest one that would work?
πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/qUxUp
πŸ“…︎ Oct 02 2021
🚨︎ report
"Clamp-on" A2 Front sight sans bayonet mount other than JP Ent?

Not looking to spend $130+ on a clamp on JP model, but want that iconic A2 look. I've considered a railed receiver height gas block and a SW Peak type sight, but really want the iconic triangular A2 style.

πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/questformadness
πŸ“…︎ Sep 15 2021
🚨︎ report
Decided to impulse buy a Super Stabby Bayonet Mount. The results are MUCH better than what I anticipated for the AUG. reddit.com/gallery/o4fdmf
πŸ‘︎ 49
πŸ’¬︎
πŸ‘€︎ u/Mirzayev
πŸ“…︎ Jun 20 2021
🚨︎ report
12" pistol bipod mount on bayonet lug? reddit.com/gallery/pjq360
πŸ‘︎ 5
πŸ’¬︎
πŸ‘€︎ u/tjekrelwlinear
πŸ“…︎ Sep 07 2021
🚨︎ report
590 Bayonet mount length not compatible with OKC 3S?
πŸ‘︎ 12
πŸ’¬︎
πŸ‘€︎ u/Oktavius82
πŸ“…︎ Jul 07 2021
🚨︎ report
Sawed off bayonet mount on my 1953 Tula SKS reddit.com/gallery/orrro6
πŸ‘︎ 5
πŸ’¬︎
πŸ‘€︎ u/Uncle_ArthurR2
πŸ“…︎ Jul 26 2021
🚨︎ report
How to cut a slot for pin in curved face? (Bayonet mount?)

Hello,

I have a hose for my tent pump that has a different coupling than a pump for my air mattress.

In order to bringing both pumps, I wanted to create a reduction piece from tent pump hose to air mattress nozzle.

The air mattress nozzle looks like this:

https://i.imgur.com/e3XxZGq.png

So in order to secure it I wanted to make a bayonet mount, which is something like this:

https://i.imgur.com/eqGZrVd.png

https://i.imgur.com/PB7W9Ah.png

What I came up with is this:

https://i.imgur.com/37NhQmd.png

I made it by creating a sketch of the "slot" in the center and then extruded with an offset to make a the cut from the outside, however this feels more like a hack than a valid workflow, not to mention that the cutout is not parallel to the walls of the piece as expected if you were extruding directly from the face of the object:

https://i.imgur.com/2nCGrvb.png

What would be the correct way to do this?

Thank you

πŸ‘︎ 10
πŸ’¬︎
πŸ‘€︎ u/DonAsiago
πŸ“…︎ Jun 06 2021
🚨︎ report
Bayonet picatinny mount on model X

So I'm wanting to mount a bayonet, preferrably one of the new retractable ones like the OKC bayonet https://ontarioknife.com/collections/bayonets/products/okc-retractable-bayonet to the bottom pic rail on my henry .44 model X.

I'm afraid that the knife will not protrude past the suppressor (still waiting on NFA stamp). I think the suppressor is 8in.

Does anyone know of a pic rail bayonet setup with a longer blade? Like maybe 12 in blade or more?

πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/leftyghost
πŸ“…︎ Aug 02 2021
🚨︎ report
The post 63 arsenal 636 Type 56 Norinco SKS now with a TAPCo mag and the silly remnant of the bayonet mount removed. It's a fiberglass stock. v.redd.it/f010o54frez61
πŸ‘︎ 24
πŸ’¬︎
πŸ‘€︎ u/Ecks811
πŸ“…︎ May 16 2021
🚨︎ report
I designed and made a replacement reversible bayonet mount lens hood for the Fujifilm XF 80mm f/2.8 Macro Lens, after I lost the stock one and found out it wasn't commercially available (it is now, but not cheaply or quickly). 3D printing to the rescue! Modeled in Fusion 360, design file available. prusaprinters.org/prints/…
πŸ‘︎ 16
πŸ’¬︎
πŸ‘€︎ u/BTS_Designs
πŸ“…︎ May 06 2021
🚨︎ report
Any ideas on how to mount an M70 bayonet onto a belt or MOLLE so it could be easily drawn but still useable as wire cutters?
πŸ‘︎ 22
πŸ’¬︎
πŸ‘€︎ u/ChunkyBrassMonkey
πŸ“…︎ Apr 22 2021
🚨︎ report
[WTS] Russian Bakelite AK-47 Bayonet with Scabbard 6x3, Arsenal SM-13, and Gen 2 Master Mount $69-$420 [FL]

Sup, comrades. I've both bought and sold some shit over here (including the Master mount below lol) but I've neglected to log feedback (because I'm a lazy dickhead). Anyways, here's what I've got (x posted in GAFS):

Russian Bakelite AK-47 Bayonet with Scabbard 6x3 - In excellent shape. Pictures Here. PRICE: $70 OBO SOLD

Arsenal SM-13 Mount - Mounted once and put back in da packaging. Pictures here. PRICE: $125 OBO SOLD

Master Mount AK Mount Gen 2 - Bought this here like 2 years ago and never used it. Pictures here. PRICE: $65 OBO SOLD

πŸ‘︎ 5
πŸ’¬︎
πŸ‘€︎ u/metaxa219
πŸ“…︎ Mar 24 2021
🚨︎ report
Did k98s bayonets get made without the rifle mount or is this fake
πŸ‘︎ 18
πŸ’¬︎
πŸ‘€︎ u/chickenboi6
πŸ“…︎ Feb 26 2021
🚨︎ report
Imagine actually having to mount a bayonet, while using a free float rail...
πŸ‘︎ 97
πŸ’¬︎
πŸ‘€︎ u/Ttran778
πŸ“…︎ Nov 12 2020
🚨︎ report
Mod armory Dual pvs14 mount (bayonet) /r/GunAccessoriesForSale/…
πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/Adriansaldana11
πŸ“…︎ Jul 03 2021
🚨︎ report
VSR K98, No plastic allowed! With a total of 4.5kg, 4.7kg if I mount a bayonet
πŸ‘︎ 291
πŸ’¬︎
πŸ‘€︎ u/Real_WorldAtWar2
πŸ“…︎ Nov 14 2020
🚨︎ report
Custom wall mount for the M9 bayonet i made. reddit.com/gallery/n0ba2v
πŸ‘︎ 26
πŸ’¬︎
πŸ‘€︎ u/chiefmemer
πŸ“…︎ Apr 28 2021
🚨︎ report
Made rectangular lens hood for Sony 50 1.8 OSS or 1855 - mounts on native bayonet. Free download link
πŸ‘︎ 35
πŸ’¬︎
πŸ‘€︎ u/InsidiousEntropy
πŸ“…︎ Dec 17 2020
🚨︎ report
YoU cAnT eVeN mOuNt ThAt BaYoNeT oN tHaT rIfLe.
πŸ‘︎ 961
πŸ’¬︎
πŸ‘€︎ u/Timo7hyDanger
πŸ“…︎ Mar 09 2020
🚨︎ report
Bayonet mount for camera. Allows melee attack and photo shoot in the same turn. Useful for documenting kills.
πŸ‘︎ 24
πŸ’¬︎
πŸ‘€︎ u/hesapmakinesi
πŸ“…︎ Feb 03 2021
🚨︎ report

Please note that this site uses cookies to personalise content and adverts, to provide social media features, and to analyse web traffic. Click here for more information.