Offset printing Puns

A list of puns related to "Offset printing"

Is this tiny offset normal when printing the brim?
👍︎ 2
💬︎
👤︎ u/_RolandDeschain_
📅︎ Jan 02 2022
🚨︎ report
HELP - Mild inaccuracy with printing for mechanical parts - What's causing this bleed/offset in the print?
👍︎ 4
💬︎
👤︎ u/RotatingMoss
📅︎ Jan 03 2022
🚨︎ report
Can't adjust z offset in menu or while printing

Put a SKR 2 in my brother inlaws CR10S5 and an BLtouch as well. Did the usual configure and compile Marlin. The problem is, when I go to move>bed level>z offset I can't get it to adjust up or down. Turning the knob doesn't change the value. I can go into the advance menu and change the z offset that way just fine, and I can also move the z axis below zero (software endstop is disabled) it's GOT to be a setting I'm overlooking. I've compiled firmware a millions times it seems but never had this issue before

👍︎ 2
💬︎
👤︎ u/emersontheawful
📅︎ Dec 31 2021
🚨︎ report
"Let the atom serve peace, not war!" Art. M. Lukyanov, 1974, 59 x 89 cm. Offset printing.
👍︎ 38
💬︎
👤︎ u/Bernard_Hunor_Deak
📅︎ Jan 09 2022
🚨︎ report
"Revolutionary ideas are moving along the path opened by the October Revolution" 1973, 54 x 77 cm. Offset printing, Havana, Cuba.
👍︎ 11
💬︎
👤︎ u/Bernard_Hunor_Deak
📅︎ Jan 09 2022
🚨︎ report
What's the Lowdown on Non-US Low-Run Offset Book Printing?

https://preview.redd.it/gc13s0nw49681.jpg?width=1117&format=pjpg&auto=webp&s=f8be6bad10ad0a85470e3b0470f5c6c058d6f297

We make high-end, full-color, hardcover books have been been successful enough that I'm starting a second company aimed at different market, but US pricing for offset runs under 500 is a killer. With multiple titles, putting $20,000 into any one book isn't an option, and due to the risk I'd rather pay a higher per-copy cost for 200-400 copies.

I've been browsing PublishersGlobal.com for options, but publisher resources and printer reviews seem scarce generally. I notice similar books are printed in Slovakia, Italy, and elsewhere, so I've been doing some outreach in E. Europe. China feels sketchy, but there's no question about the cost differences elsewhere.

The only option seems to be to find find a reliable printer overseas with a solid track record, so my questions are:

  • What are the best and most reliable non-US countries/companies to print in?
  • What are some good resources to hunt them down?
  • And are there any tips or tricks anyone in the know might be able to provide?

Any advice would be greatly appreciated.

👍︎ 9
💬︎
👤︎ u/NeutralInvestor
📅︎ Dec 18 2021
🚨︎ report
[WTS] 1914 $5 Federal Reserve Note, Offset Printing Error $20, $555 Face of 1934 and 1950 notes. Clear me out!

Proof: https://imgur.com/a/CUTHcFO?s=sms

Pm or chat please! Detailed images attached to lots below.

--

Lot 1: 1914 $5 Federal Reserve Note. Atlanta District. PMG VF 35. Fr#867a. Slight Minor Rust Comment. No distracting folds, strong VF for the grade. $140. SOLD

Lot 2: 1981 $20. OFFSET Printing Error. Note district smudge. If you've wanted a cheap error, this is it. Note is crisp high AU. $60.

Lot 3: $555 face value of 1934 and 1950 Notes. A majority ($410 face) of the notes are 1934. $145 face is 1950. All the notes are of different districts, and denominations vary from $5 to $100. All notes come in protective plastic sleeves. Take the lot for $675! SOLD

---

PPFF, Venmo, Zelle.

Thank you!

First class is $5, Priority is $9.

👍︎ 6
💬︎
👤︎ u/isisssss
📅︎ Dec 21 2021
🚨︎ report
Please help I've been trying to get this right for months. I have Auto bed leveling enabled and my z offset is -10mm and it is still printing way too high v.redd.it/bqvo3byt53081
👍︎ 18
💬︎
👤︎ u/Joseph____Stalin
📅︎ Nov 17 2021
🚨︎ report
Is this bed leveling issue (paper, z-offset, bl touch)?! Printing at the same time with same settings. One part is smooth, the other one very crispy. reddit.com/gallery/rqn5qt
👍︎ 2
💬︎
👤︎ u/weekybr
📅︎ Dec 28 2021
🚨︎ report
I have been printing with no issue for the past year but recently about 75% through the print I hear a loud grinding noise for second then the rest of the print is offset by 1/4 of an inch. Any ideas? reddit.com/gallery/rpnzys
👍︎ 2
💬︎
👤︎ u/angelikore
📅︎ Dec 28 2021
🚨︎ report
Issue while printing, print offsets each layer in one axis in the same direction. Calibrated printed, tightened belts, played around woth setting. What ive done seems to have helped, but still not fixed. Anyone got an idea to why this might be happening? (Ender 5 pro) reddit.com/gallery/r9dxcx
👍︎ 2
💬︎
👤︎ u/tboske
📅︎ Dec 05 2021
🚨︎ report
They offset the printing on my R2D2 Lego Minifigure
👍︎ 19
💬︎
👤︎ u/CristinaBarbecue
📅︎ Dec 17 2021
🚨︎ report
UBQ Materials and Plastics App: making sustainable 3D printing functional. UBQ™ is a versatile raw material that can be used across industries and applications to offset the overall carbon footprint of end-products. v.redd.it/1jak4zpyuy981
👍︎ 3
💬︎
👤︎ u/Jay-Wevolver
📅︎ Jan 06 2022
🚨︎ report
Poster "The whole universe was bypassed, God was not found anywhere!" Art. A. Pashenkov, 1960, 66 x 101 cm. Offset printing, Moscow
👍︎ 8
💬︎
👤︎ u/Bernard_Hunor_Deak
📅︎ Dec 30 2021
🚨︎ report
"50 years of Soviet power. 50 years of successful communist construction." 1967, 57 x 82 cm. Offset printing, Leipzig, GDR/Germany
👍︎ 2
💬︎
👤︎ u/Bernard_Hunor_Deak
📅︎ Jan 05 2022
🚨︎ report
[Ender 3 pro] Print layers seemed to be offset, but the print itself was in the right spot. The print didnt come off the build plate and stick somewhere else, it just started printing at another spot
👍︎ 4
💬︎
👤︎ u/itsanantk
📅︎ Nov 27 2021
🚨︎ report
Poster "Cold War. Knock-out!" Art. M. Abramov, 1990, 48 x 65 cm. Offset printing. "Panorama", Moscow, USSR
👍︎ 48
💬︎
👤︎ u/Bernard_Hunor_Deak
📅︎ Nov 05 2021
🚨︎ report
Catia V5 - Is there a way to offset a surface or set of surfaces planar? I would like my cross section to maintain a constant. This is for large scale 3d printing, where I need to maintain a wall thickness that corresponds to bead width.
👍︎ 9
💬︎
👤︎ u/iFlow43
📅︎ Nov 17 2021
🚨︎ report
Just got Captain Carter from a blind bag. Is it just me, or is the shield printing very offset?
👍︎ 38
💬︎
👤︎ u/TommyTooner
📅︎ Nov 07 2021
🚨︎ report
Hi all, can anyone help me determine what’s wrong with my first layer? I have tried to clean the nozzle, change print temps, change z-offset, etc. I have a bl-touch and I can’t figure out what’s wrong with my print. I am printing with matterhackers build series. Any help would be appreciated. reddit.com/gallery/qu8rme
👍︎ 2
💬︎
👤︎ u/WicketMaul3
📅︎ Nov 15 2021
🚨︎ report
November 7 - Day of the October Revolution of 1917 (one of the most important holidays in the USSR) Poster "The light of October's banners is the outset of a new life!" Art. V. Viktorov, 1965, 107x56 cm. Offset printing. "Sovetsky Khudozhnik" (Moscow)
👍︎ 45
💬︎
👤︎ u/Bernard_Hunor_Deak
📅︎ Nov 24 2021
🚨︎ report
Offset printing operators: What kind of machines do you use? Do you print on paper or cardboard?
👍︎ 2
💬︎
👤︎ u/dolin5
📅︎ Nov 18 2021
🚨︎ report
Is there a way to offset a surface or set of surfaces planar? I would like my cross section to maintain a constant. This is for large scale 3d printing, where I need to maintain a wall thickness that corresponds to bead width.
👍︎ 2
💬︎
👤︎ u/iFlow43
📅︎ Nov 17 2021
🚨︎ report
This print was centred in the slicer but it's printing like this. My probe offsets are what the designer of the mount stated and I've measured to be sure. Not sure why else it would print like this?
👍︎ 2
💬︎
👤︎ u/HuwJohn91
📅︎ Nov 21 2021
🚨︎ report

Please note that this site uses cookies to personalise content and adverts, to provide social media features, and to analyse web traffic. Click here for more information.