A list of puns related to "Yanmar"
My choke is stuck tight on my control panel so can't get it off/on depending on where it's stuck. Is this just a lack of grease lube or is a replacement needed. Thanks for the input. 83 islander 30
Anyone help me with what kind of motor oil to use for an oil change. Not really a diesel engine guy. This was my dad's tractor, and it hasn't been started in 10+ years. I'm planning on getting it up and running and figure the best place to start was an oil change. Sorry for the rookie question, just don't want to do more damage than is already done.
Hi, I was wondering if anyone knows how I can identify this tractor? I know Iβd be looking for a serial number or model number but itβs alluded me so far.https://imgur.com/a/02fUDYN/
Hey guys I got a little ym1500(red) and Iβm trying to see what Iβm getting into repairing the steering. It will turn all the way to the right and straighten back out but anything left of straight the steering wheel shaft starts to back out. I havenβt torn it down yet. Any ideas or anything I need to know?
I know this is a long shot but I'm looking for a yanmar 2200 with maybe a blown or cracked block. I have one with a good engine but steering box is bad and needs a few other odds and ends.
Hi brains trust
I've got a Deere 355D with a Yanmar 2v78 diesel.
Starts and runs well, makes plenty of power when cold.
When warm, the RH cylinder drops - confirmed by stalling when LH injector is cracked, and relatively cool exhaust port temperature on RH after operating at load.
Is it possible that this is an injector issue? Could it be partly clogged / obstructed, but with expansion etc at operating temperature the injector is fully obstructed?
New fuel filter, low pressure fuel pump healthy and good return line flow. Fuel clean with no water. Valve lash is in tolerance too.
Hope this makes sense. Thanks in advance!
If you need Yanmar or any other Japanese compact tractor parts, filters in the UK (can ship abroad but more expensive) go to www.yanmart.co.uk
Does anyone know where I can get wide wheels and turf tires for my yanmar 2820? I can't find the lug specs online to make sure I get the right wheels. Hoye tractor dot com used to sell kits, but I think they have gone out of business. Anyone have another source or the lug spacing for the 2820?
I'm young and dont have the experience some of y'all do. Basically I got an actual (not chinese) yanmar l48 its had the crank shaft removed from the tapered type to 3/4 in keyed, and I have throttle control (instead of one speed like it currently has) coming in from overseas. Is their anything else I need to do that any of you guys familiar with these engines know about.
The coolant water pump on our sailboat just seized up. Sailing to Houghton now, will arrive tomorrow. Is there someone in town who can help with getting this repaired?
PM me for details.
Just looking for spare impellers, fuel filters etc.
Prefer someone with their own stock and not just having it couriered over from Western Marine a day or two later.
I have a yanmar 1500 my 3 point lifts but will not go down. Does anyone have any advice?
I need to find a diesel mechanic to look at our sailboatβs Yanmar. The coolant pump just seized up and we are sailing to Houghton. Should arrive tomorrow. Does anyone have a good recommendation they could pass along?
Has a 3/4 shaft but is set up for being used on generator I know the speed control has to be changed cause right now it's either nothing or 3000rpm. Is there anything else I need to change
Please note that this site uses cookies to personalise content and adverts, to provide social media features, and to analyse web traffic. Click here for more information.