Why YSK: Carbon monoxide (CO) is known as the "silent killer" for a reason. It's odourless and colourless, so it's very hard to detect. For this reason, it's always a good idea to ensure your fire detector/smoke alarm also has CO detection (most of the newer fire detectors come standard with this nowadays).
I'm making this post because I noticed a lot of black soot (black powdery substance) building up on the bottom of my girlfriend's pots and pans when we cook at her condo. I also have a gas range stove at my place but have never seen build-up of soot on my cooking equipment. This soot will come off as black dust on your finger if you rub the bottom of a pan after it cools. Recently, the CO alarm went off on the smoke detector at my girlfriend's place, which obviously caused some concern and I started to look into the potential causes while she called the fire department. Be sure to get out of the house and/or ventilated it by opening the windows. Getting out of the home right away is the safest option and highly recommended.
One of the best articles I found was this one: https://www.abe.iastate.edu/extension-and-outreach/carbon-monoxide-poisoning-checking-for-complete-combustion-aen-175/
The article shows that soot can be a sign that your natural gas stove is has an incorrect mixture of air and gas, which can lead to an incomplete burn. This incomplete burn can cause the build-up of soot and carbon monoxide in your home. While this typically creates CO in amounts that are not deadly, they can cause a lot of health problems over time and if the ventilation in your home is poor, it can potentially be fatal.
Some symptoms of CO poisoning are headaches, shortness of breath, dizziness, weaknesss, confusion, and nausea. If you have any of these symptoms that seem to clear up when you leave home, check the bottom of your pots and pans for clues. The article above goes into a lot better detail than I ever could, and I'm definitely no expert in this field. I figured this could be life-saving information and was worth a share. If anyone who's an expert in this that has corrections for my info and/or more information on this, I encourage you to share it in the thread.
Stay safe out there,
Sillyist
I have reported him, but the owners of the apartment do not care.
Use Code: 2THEPOINT for discount making this $69.97
Going back to school and selling my fountain pen collection! (Need to replace my laptop!)
The Pineider, Dupont, and Pilot all come with the included box. The Lamy 2K and Faber Castell do not come with a box. But the latter does come with a sleeve. Prices do not include shipping. Thank you for your consideration! Of course, only PayPal G&S taken at this time.
https://imgur.com/a/ghl0EMT Album with verification
- Dupont Line D Large (M) (B-Excellent) $600 USD
Pineider La Grande Bellezza Forged Carbon (EF) (B-Excellent) 600 USDSOLDPelikan M805 (M) (B-Excellent) $300SOLDPilot Custom 823 (F) (B-Excellent) $200SOLDLamy 2K (EF) (C-Fine) $100SOLD- Faber Castell Tamitio Rollerball Stone Grey - 150
CB Advanced is $30/device. SentinelOne Control is $31/device.
CB gives me a process tree/timeline of the attack. S1 requires Complete to do that, about $60/device.
I've been quoted $2,500 for VMware to help setup my policies so it's set and forget. I read a lot of hate on here about CB being too noisy. Also a decent amount of hate for S1. CrowdStrike seems to be the favorite but it's $70-80/device, so wanting CB or S1.
Which one would you go with? 200 devices, so small environment. Upgrading from Webroot, so anything is better.
https://preview.redd.it/uull9z9hw3b81.jpg?width=5184&format=pjpg&auto=webp&s=d67875eb1dc0a300f25d45178395b59352bb8b5a
https://preview.redd.it/8gkdfcbgw3b81.jpg?width=5184&format=pjpg&auto=webp&s=088f2358ebdb1ad20aafc5e3332d406d7e774fcc
Just put on the new carbon wing. Not sure if I should wrap the roof gloss black yet, I would like to hear some opinions
Moving soon, so I need to downsize unfortunately. All prices are negotiable and are listed in USD, I can give you shipping quotes based on your postal code, here’s what I have for sale:
(TIMESTAMP)[https://imgur.com/a/INagiMW]
[A+] Xbox Series X with 1 TB SSD - $500
[A+] (NIB) Xbox Wireless Controller in Carbon Black - $40
[A] x3 Taiker Rechargeable Battery Pack + Charger - $15
[B+] Assorted Xbox/Xbox One Games - $15/Each
- x2 COD Black Ops Cold War
- x2 COD Modern Warfare
- x2 Elder Scrolls IV: Oblivion (GOTY Edition, for Xbox One x)
- Halo 5 Guardians
- Battlefield 1
- Fallout 4
- COD Advanced Warfare
- Tales of Vesperia: Definitive Edition
- NieR Replicant
Message me with any offers/questions/comments/concerns/requests you may have, I’m always happy to help. Thanks for looking!
Hi All,
Sales are CONUS only and include shipping, all built setup can be desoldering clean if needed.
Thank you!
| Item | Price | Description |
|---|---|---|
Keycaps:
| GMK Crimson cadet Base+symbols | $450 | no shine, shipped in bag. |
| GMK Rudy | $400 | no shine, just mount 1 time for pictures. shipped in bag. |
| SA Laser | $160 | Gaijin alpha+ mods+ 7u space blue. |
Switches:
| 110x Mauve | $100 | New, Lubed and filmed |
| 70x Telios top Milky | $70 | New, Lubed and filmed. Telios with top Milky |
NEW POST HERE
A = Available
R = Reserved
S = Sold
Switches
| Item | Description | Price (EUR) | Status |
|---|---|---|---|
| x72 Glorious Panda | Lubed with 205g0 and 105g0 on springs. TX 0.15 film. I lubed all the stem except the legs. | 35 + shipping | A |
| x79 Gateron Yellow Pro | Lubed with 205g0 and 105g0 on springs. | 20 + shipping | A |
| x81 Gateron Red | Stock | 15 + shipping | A |
| x45 Gateron Milky Yellow 5 pins | Lubed with 205g0 and 105g0 for springs. | 20 + shipping | A |
| x87 Gateron Milky Yellow 3 pins | Lubed with 205g0 and 105g0 for springs. I cut the other 2 legs because my old CTRL keyboard didn't support 5 pins switches. | 38 + shipping | A |
Keycaps
| Item | Description | Price (EUR) | Status |
|---|---|---|---|
| MT3 Cyber | New, I only open for some photos | 85 + shipping* | A |
| Akko ASA Carbon | Used | 45 + shipping* | A |
*shipping with original box, 10 Eur cheaper if you choose to ship in bag
Note
This is not FCFS, I will piority buyer in Germany and then the other countries in EU.
All items above will shipping with DHL, you can check shipping fee on DHL website, shipping in Germeny cost 5 Eur only.
Please sent me money through Paypal G&S. Paypal fee is included.
I don't check Reddit regularly so if you have any question or if you want to buy anything please DM me on Discord at LightTD#4358. Please comment before you send me a DM via Discord.
NEW POST HERE
-
Do the particles settle in the bottle? I want to use this to set up my next bujo, but I probably won’t use it very often after that.
-
Does it do well with twsbi feeds?
-
How about Pilot Parallels?
-
Will it work with extra fine nibs?
Timestamp, pics and vid: https://imgur.com/a/Ld2ojum
TRADE PENDING
Jake Hoback Husky Nitro-V Black DLC Stonewashed Blade, Milled Carbon Fiber and Black DLC Stonewashed Titanium Handles. It is from the latest drop. I would give it a (B) due to being the second owner. Never cut, never disassembled, and never sharpened. Lock up is great, and centering is dead on. It is just a bit big for my liking. I would like to trade this for a
Hinderer xm-18 3.5
Hinderer Elkipse gen 3
Demko AD20
ZT0562TI
ZT0393
+/- cash depending on trade TV$525 SV$500
I have had this ink for about a month and a half but over the last week or two it is not flowing consistently. It seems thicker and thinner in certain areas. It spurts out almost like a paste sometimes.
I got a new notebook and it’ll feather and then not feather on certain words. I assumed the problem was the cheaper notebook, but I figured I’d ask: Does it need to be shaken pretty regularly? Like vigorously? And is it known to feather on cheap paper, in any case? I’m considering going back to De Atramentis Document Black, because that stuff looks decent even on a receipt.
Note: Gave my pen a cleaning two days ago, and the issue was the same.
Update: Last night I cleaned it again, and shook up the ink before filling it. I shook it like it was a protein shake, which may have been unnecessary. But it’s working perfectly again! Very smooth, perfect straight lines. No feathering.
CB Advanced is $30/device. SentinelOne Control is $31/device.
CB gives me a process tree/timeline of the attack. S1 requires Complete to do that, about $60/device.
I've been quoted $2,500 for VMware to help setup my policies so it's set and forget. I read a lot of hate on here about CB being too noisy. Also a decent amount of hate for S1. CrowdStrike seems to be the favorite but it's $70-80/device, so wanting CB or S1.
Which one would you go with? 200 devices, so small environment. Upgrading from Webroot, so anything is better.
A = Available
R = Reserved
S = Sold
Switches
| Item | Description | Price (EUR) | Status |
|---|---|---|---|
| x79 Gateron Yellow Pro | Lubed with 205g0 and 105g0 on springs. | 20 + shipping | A |
| x81 Gateron Red | Stock. | 15 + shipping | A |
| x45 Gateron Milky Yellow 5 pins | Lubed with 205g0 and 105g0 for springs. | 15 + shipping | A |
| x87 Gateron Milky Yellow 3 pins | Lubed with 205g0 and 105g0 for springs. I cut the other 2 legs because my old CTRL keyboard didn't support 5 pins switches. | 30 + shipping | A |
| x92 OP Black | Lubed with 205g0 and 105g0 on springs. TX 0.125 film. | 85 + shipping | R |
Keycaps
| Item | Description | Price (EUR) | Status |
|---|---|---|---|
| MT3 Cyber | New, I only open for some photos. | 85 + shipping* | A |
| MT3 EXTENDED 2048 | Modifiers, Accent Modifiers and Alpha. Shipping in bags only. | 125 + shipping | A |
| Akko Carbon ASA | Used | 35 + shipping | A |
*shipping with original box, 10 Eur cheaper if you choose to ship in bag
Stabs
| Item | Description | Price (EUR) | Status |
|---|---|---|---|
| New, I'm don't have enough keyboard board to put them in. SOLD 1, still have 1 available | 15 + shipping | A |
Note
This is not FCFS, I will piority buyer in Germany and then the other countries in EU.
All items above will shipping with DHL, you can check shipping fee on DHL website, shipping in Germeny cost 5 Eur only.
Please sent me money through Paypal G&S. Paypal fee is included.
I don't check Reddit regularly so if you have any question or if you want to buy anything please DM me on Discord at LightTD#4358. Please comment before you send me a DM via Discord.
