Timestamp

Looking to offload some stuff. Selling the following:

FCFS. Shipping to CONUS and OCONUS (shipping cost not included) and will invoice via Paypal.

Please comment before PM, thanks!

Hello, looking to sell the following and shipping to CONUS only (included in price) :

https://imgur.com/a/0xfTmwr

• Polycarbonate KBD67 MKII hotswap kit (comes with 2 brass plates) - $190
• GMK WoB (lighty used for 1 month) - $80
• Stock Tealios (x68) - $40
• 205g0 Lubed + Filmed NK Creams (x77) - $65
• Tofu hotswap with GK64 RGB PCB - $130
• 205g0 Lubed KBDfans T1 (x64) - $40
• Anne Pro 2 with Box Black switches (no cable, but uses USB-C) - $45

SEE NEW POST

------------------------------------------------------------

Timestamp

Price drops! Continuing to sell more of my keeb stuff to fund other keeb stuff :)

Everything is OBO so feel free to shoot me any (reasonable) offers!

Please read carefully and don't hesitate to ask any questions.

Items are Available unless crossed out

Happy holidays and stay safe y'all!

Boards:

Other Items:

what do you think of the korala polycarbonate ukes? i personally love mine

https://preview.redd.it/605j0953n2b81.jpg?width=1200&format=pjpg&auto=webp&s=3a3ed4ed582d3d414388b6739c878065f3135ded

Timestamps

SOLD

GMMK Pro Black Slate + Brass and Polycarbonate plates + Gold Rotary Knob

Selling as a whole, will throw in a free gold coloured rotary knob along with the purchase. Board is in good condition, used for a while and has been sitting in storage. Plates are unopened and still in its original packaging with seal intact.

$150 + shipping

Keychron K3 V2

Low Profile Browns, a few switches are blues. Those are the ones around the left control cluster and the rightmost key column (the one with Home, Page Up and Page Down), refer to pics for more details.

$75 + Shipping

Prices are in USD and includes Paypal Fees.

If you are based in Melbourne, I can offer in person pickup in the CBD.

Shipping fees will be dependent on where you are and a rough estimate will be provided if you PM.

My anxiety has gotten to a point of complete hell. i am worried about my eyes becoming damaged so much that i have decided to buy and wear safety glasses (polycarbonite). no mater what i do during the day i am absolutely petrified. im scared my phone is gonna explode while looking at it ot my computer will blow up and sparks go in in my eyes ect. i'm even to scared to eat hot foods due to the heat going near my face. i'm staying as a inpatient in 8 days to get myself organised but atm its hell. im even worried now that my safety glasses are gonna hurt my eyes. i just can't win. is it safe to wear these plastic glasses all the time they are clear frame. thanks

I have modified my Ender 6 a bit, and plan to try to print polycarbonate parts with it. So far I have replaced the hotend with a direct drive Biqu H2 hotend/extruder (including a metal mount on linear rails since it didn't like the PLA/PETG mounts I tried), fully enclosed it with a top cover, and added a CRTouch. The only issue I see to printing PC is that the heated bed is only rated up to 100C - not sure if that's a firmware-imposed limit or its' actual limit. However, I'm pretty sure I'll need to be able to hit around 130-150C on the heated bed to print 'real' PC successfully, and I might even need an enclosure heater. Are there any solutions to upgrading the bed heater? And, while I'm asking, any specific or previously-tested solutions to an enclosure heater for the E6?

Timestamp

Priority will be heavily given to local and bundles! Zip code is 92780

Timestamp

CONUS/Canada shipping included. Can ship Internationally.

Everything is priced at or below retail + ship except the Salvun.

E7-V2 Black Backplate: $45 shipped

• New, unused

Protozoa P01 FR4 Plate: $25 shipped

• New, unused
• White

Want to also buy/trade for a polycarbonate plate for E7-V2

I have 2 mid 2010 white MacBooks and neither of them work with 8GB of ram?? Both sticks work by themselves in both machines but they won’t work together at all. One does have the latest firmware updates but one doesn’t, yet they still won’t accept both the ram sticks without beeping on startup. Does anyone know how I can get my ram to work in these?

I'm working on a school project where you design a business. Simply put, we're making safety glasses. We're going to make the frames in-house, but we're outsourcing the lens manufacturing to another company. We want to find a company that will manufacture these lenses to our exact specifications (600 a month).

Hi All!

Looking for the above, am willing to take offers from the US as well.

Thanks!

Timestamp

I’m pretty flexible. Open to built or kits. Max budget $500 for a board I really like but prefer to stay closer to $400 and under.

Switch preference: linear (non silent) or something like a U4T

No chats and feel free to send me whatever you got. Thanks for looking.

Good morning everyone,

I've been wondering about different weapon core materials as I've been looking into making some weapons of varying sizes and lengths.

Different cores will work best for different weapons, I'm sure.

I've seen Fiberglass, carbonfiber, pvc (not advised), wood/bamboo(not advised) There are, however other materials I've seen very little discussion about

Polycarbonate rod/tubing, or other types of rigid plastics. Does anyone have any experience in these?

Thank you!

Early in 2021, I ordered my first roll of polycarbonate from Gizmodorks and was immediately impressed with the strength but had issues with printability as one would expect. I made it my mission for 2021 to upgrade my ender 3 to the point that I would have consistent success printing this material. I am now printing larg-ish parts from Polymax PC with zero warping and I thought there might be others in the community who could benefit from my trial and error. While this build was centered around polycarbonate, these upgrades are likely going to be useful for any printer.

Below are the general notes from my work on successfully printing over the past few months:

Hardware:

-If you are starting with polycarbonate, go with a blend like Polymax PC from Polymaker or Prusament PC. These will make things easier early on. I have switched over to Polymax PC but will likely give some cheaper options a shot as Polymax PC is pricey.

-Conversion to Klipper via Fluidpi is worthwhile as I am now able to print faster with higher quality. The interface is also nice and makes future upgrades easier.

-An enclosure is a must. I ended up making mine out of 20x20 extrusion, corrugated plastic sign board and 2 sheets of Lexan for the front door. All sides are double walled including the door, as the air gap between the two walls greatly helps with insulating the build chamber. The gap in the door is also sealed off via latches and some plastic tubing inserted into the grooves of the 20x20 extrusion. If done correctly, running the bed at 110C will result in a ~50C enclosure temperature which is measured with remote barbecue thermometer. It is worth putting a G4 command at the start of your print to allow the bed to head up the chamber prior to printing.

-For enclosure construction, I used blind joints so I could mount a coroplast sheet in the grooves of the aluminum extrusion and mount a second panel on the outside of the parts. There was a lot of drilling and tapping for this project (probably 4hours). I don't have a model of the overall enclosure but I do still have all of the parts that I designed including the housing for raspberry pi, power supply, and mainboard if anyone is interested. With the temperatures you will be printing at, you must move all of the electronics out of the enclosure. I do still need to do some additional cable management as it is currently a bit cluttered.

-For first layer adhesion, 2 items of note: BL touch is greatly bene

Timestamp

Continuing to sell more of my boards to fund other boards :)

Everything is OBO so feel free to shoot me any (reasonable) offers!

Please read carefully and don't hesitate to ask any questions.

Items are Available unless crossed out

All items will ship AFTER the Christmas holidays!

Happy holidays and stay safe y'all!

Boards:

Timestamp

Continuing to sell more of my keeb stuff to fund other keeb stuff :)

Everything is OBO so feel free to shoot me any (reasonable) offers!

Please read carefully and don't hesitate to ask any questions.

Items are Available unless crossed out

Happy holidays and stay safe y'all!

Boards:

Other Items: