Atomizer nozzle Puns

Where do you guys buy yours? I have seen some really expensive prices, cheapest is 180usd but surely they can be cheaper?

The technology is used for all sorts of things, so why can't I find cheaper ones?

Thanks :)

So I'm thinking about making a pressure atomizing gasoline burner for my steam trike, but I'm having trouble finding information about atomizing spray nozzles. I've got my eyes on a fuel injected motorcycle fuel pump that maintains 40 psi. Theoretically I could hook this up to a fuel injector just like in a car, but this isn't ideal. Fuel injectors are designed to put out a ton of fuel and be pulsed. This isn't really what you want for a burner. I'm looking for around 1gph. I haven't really found much information about the specifics of atomizing nozzle design or selection. Ideally I'd like to be able to use an off the shelf oil burner nozzle. I wish I could find a chart or something so I could do something like this: If this nozzle flows 1gph with heavy fuel oil at 100psi, then it should flow ___ of gasoline at 40psi, if it's even enough pressure to properly atomize it. Since gasoline vaporizes easier and it has lower viscosity than oil, an oil nozzle should be able to work with gasoline at a lower pressure, right? If anyone has any tips or sources of information that would be helpful.

3 week owner here so please be patient with me :) So I tried the atomic pull method as described in the wiki and elsewhere but now my hot end is completely jammed. Heated to 250 and no matter how hard I push with another piece of filament it will not extrude at all. I followed the instructions very carefully so I'm pretty sure I did it right. Where do I go from here?

Hi Reddit readers, In this review i take a look at the Artemis MTL RTA from Cthulhu Mod. The Artemis MTL RTA was supplied for the purpose of this review by Joshua from Cthulhu Mod.

https://www.cthulhumod.com/artemis-mtl-rta/

https://preview.redd.it/i2u0asw78w871.jpg?width=1200&format=pjpg&auto=webp&s=acf4c9049ebc0b492f0c6af264b9bcb8a2c82382

Introduction

Cthulhu Mod was the first manufacturer i came across that bridged that gap with some of their early RDA's and RTA's between mainstream and High End while keeping prices reasonable, of course now Thunderhead Creations and BP Mods are very similar with both Dovpo and Aspire with their Manufacture collaborations also upping their game in this regard!

Cthulhu Mod despite recently releasing a couple of Mods are rebuildable specialists and here we have their latest MTL RTA The Artemis. With a unique look and clever way of inserting airflow pins which allows swapping out while not disturbing your build this has a very interesting design. With adjustable AFC also having 5 settings and 4 different bore size airflow pins plus the option of no airflow pin gives 25 different airflow settings ranging from tight MTL to loose MTL, and even sketchy RDL. Also coming with alternative matching smoked tube and 510 drip tip and packaged in a useful deep tin with screw lid let's check out The Artemis MTL RTA from Cthulhu Mod!

___________________________________________________________________

In The Box

https://preview.redd.it/av8cli0a8w871.jpg?width=980&format=pjpg&auto=webp&s=565ec09cb49a80dacf6ea8ac2ff4ec8143784860

Contents:

Artemis MTL RTA
1.0mm, 1.4mm, 1.8mm, 2.0mm air pins
Alternative 510 smoked drip tip
Alternative Smoked Poly Carbonate tube section
Spare O-rings & Post screws
Legendary Blue handled Screwdriver
Manual

___________________________________________________________________

Aesthetics

I have always liked how Cthulhu Mod package their products, at one time they use to come in flip lid boxes with cushioned lining and a hemp like material on the outside with a nice badge and cord with tassel to finish it off! Nowadays we have more toned down packaging as they instead come in useful deep tins. Here we have a deep round tin wit

Pardon my ignorance,I am new.I just want to transfer my fragrance to a 5mL spray bottle so I can use it on the go.

Will it likely start working if I replace the nozzle? What would you do?

Edit: this has now been solved so there is no need to help any longer. Thanks!

(Please bear with me if I don't know the technical parts of the printer just yet I am still trying to figure those out)

Hi everybody. Yesterday and Saturday I have spent about 5 or so hours each day with someone from their tech support service trying to solve this issue of mine. I have a Prusa Mini+ Kit that I recently got last month that I had put together and was initially working great. Prints were coming out smooth and consistent and everything was great.

Then one day the the print head just stopped extruding out any plastic about half way through the print. I thought it was most likely a clog of some sort in the hotend so I unloaded and removed the filament unscrewed the threaded coupler (?) that the PTFE tube connects into the extruder and looked inside it. I saw no residue of anything in there but did a cold pull nontheless to see if something came out and nothing did. So I reloaded the filament and purged 2-3 times to be sure and started up the print again. About 5 mins into it, it started giving me inconsistent thin stringy filament and not sticking to the print. I stopped it again and unloaded & reloaded in the filament, purged a couple of times and started off the print and been pretty much seeing the prints that I have attached.

Tech support (to their credit) feels like they have tried everything from examining the spool of PLA that was using (which checked out), to taking apart the extruder motor housing and cleaning out the gear that is in there, which helped and started giving a nice looking print but then it stopped working again to suggesting to print at 225 C. I was also given test gcode files to use. It was also suggested that I use the spare PTFE tube given for the extruder instead of the one that was replaced.

I am currently at my wits end here with this machine I have no idea what else can work with this machine.

https://preview.redd.it/8kgpe9vgap671.jpg?width=4032&format=pjpg&auto=webp&s=af7a82ffc9c4a34d4425023f73af726247cd4a1d

https://preview.redd.it/va1sz8vgap671.jpg?width=4032&format=pjpg&auto=webp&s=9996eea44bb353e57085b47ffd88c5e6993c4cfb

https://preview.redd.it/r30669vgap671.jpg?width=4032&format=pjpg&auto=webp&s=cfed9f0c027943218c99d8d7b0ac8efc92c76b39

The always helpful Mister Handy is a line of Robots created by the General Atomics Corporation. They are easily identified by their Light bulb-shaped Bodies, three Eye Stalks and three Handy Tools, but don't confuse them for the Military Variant known as Mister Gutsy. The Mister Handy has a wide array of different arms for various tasks and they are interchangeable depending on the task. The arms snap and lock onto the chassis with such ease that even the Mister Hndy could do it. Here's a few things they can do;

1. A Flame Nozzle. It always preplexed me why Miter Handies have "Flamethrowers" when I realized, they're not flamethrowers at all, but lighters with adjustable nozzles. They were used to light Cigarettes, Candles, Fireplaces, Grills and anything else that needed a small frame. After the war, the Nozzles eventually wore down and broke giving them the "Flamethrower" we see in the Wasteland.

2. Child and Pet care. Mr. Handies come with a large database on the expertise of child and pet care. Though this was never meant to replace parents completely, they were more intended to give Mom and Dad a break every once in a while. Still, this didn't stop most neglectful parents from making the Robot raise the child itself. It could also walk the Dog, change the Kitty Litter and feed the Goldfish and advise the owner to ditch the bowl in favor of a tank.

3. Shopping. Give the Robot a List and some Cash and it'll hover on down to the Store to pick up the requested items. If it is discovered the Robot doesn't possess enough cash, it'll rank every item on the list from most to least important and whatever is least important goes back on the shelves.

4. Home defense. While not a Combat Robot like its cousin, the Mr. Handy can come to defense when needed. If it spots an Intruder in the House, it will demand they explain themselves. If the explanation is unsatisfactory or the owners tell it they don't know the person, the Mr. Handy will simply escort the trespasser off the property. If they are apprehended again, the Mr. handy may hold them in place while contacting authorities.

5. Cooking. A Mr. Handy can transform an ordinary Kitchen to a private 5-Star Restaurant. Whether it be an ordinary box of Sugar Bombs or Beef Wellington, any meal prepared by the Mr. Handy won't be forgotten anytime soon.

6. Repairs. Having origins in Construction and Maintenance, it's no surprise that the Mister Handy is very "Handy". With its wide array of tools and optional addons

https://preview.redd.it/it3miburrs171.png?width=2409&format=png&auto=webp&s=8c2fd459b46ead8826b9680ba314aabf135b28a1

After hopefully covering the overview of how gas turbines work in the last post, let’s add in some additional details on a turbofan engine. The diagram for this post is intended to represent an engine that you would normally find hanging below and slightly in front of the wing of an airliner on an aerodynamic pylon. This is done to optimize the center of gravity of the aircraft (engines being probably the heaviest components), the airflow into the engines and around the wings, and the way that the thrust forces from the engines affect the handling of the aircraft. Ensuring that an aircraft remains controllable is obviously a major part of building a safe aircraft, and the engine mounting details are a part of what makes an aircraft controllable or not. Generally speaking, an airliner will have a roughly cylindrical fuselage coming to a rounded nose, a low mounted wing to provide lift and hold engines and fuel, a vertical tail/stabilizer at the rear of the aircraft to keep side-to-side yaw movements in check, and a horizontal tail/stabilizer to keep nose up and nose down pitch movements in check. In terms of flight controls, we have elevators on the horizontal tail in pitch, a rudder on the vertical tail for yaw, and ailerons on the ends of the wings for roll. The wings will also have flaps and slats to increase lift at low speeds and spoilers/speed brakes that can contribute to roll control and also used to dissipate aircraft energy in the form of drag/induced turbulence in the air downstream of them. The main landing gear of an aircraft will usually be mounted near the wing to allow landing forces to be transmitted directly into the wing spars and/or wing box in the fuselage center as these are the strongest parts of the airframe. The aircraft center of gravity needs to be near the wings for aerodynamic reasons, so most of the aircraft weight is carried by the main landing gear under the wing. Most aircraft will have at least two sets of wheels and tires on two retractable struts in the main landing gear and another retractable strut with two wheels and tires in the nose that balances the aircraft and can be steered.

On the engine side of things, modern airliners will have two main engines and one or more auxiliary power units. The initial jet airliners were built with four main engines, and as jet engines got more powerful

We moved out of town, but still have some plants & veggies up for grabs outside. Stop by 611 Bonnabel Blvd in Metairie. The gate should be open. First come first serve.

NOT AVAILABLE AFTER 6/30, WE ARE NO LONGER THERE

In the garden, feel free to harvest: White cherry & atomic tomatoes Cucumbers Okra Basil (cinnamon, thai, & genovese) Dill & dill seeds Coriander

Per comments below, it looks like nothing below is left

On patio: Lemon-lime dracaena Aloe Bromeliad Kalanchoes / mother of many Asst succulent clippings Strawberry Creeping jenny

Other: Pots Binders Bird feeder Hose & nozzle Plastic container gardens

[first] [prev] [next]

The Atrekna were feeling an emotion they had long considered purged from their persons. A feeling of cold logical frustration was the first part. Then, as they attempted to roll back time around the captured forces of the enemy, they found that the enemy themselves were temporally stabilized, and they began to feel anger. Normally the Atrekna excluded the enemy from being brought back to the strength they possessed at the beginning of the battle through a simple trick of temporal folding, which meant the enemy had been forced to undergo the passage of time while their own forces could be brought back, fresh and whole.

But the enemy seemed to want to be left moving through the time stream in such a way. Rather than their strength diminishing, their strength either stayed at parity or increased.

Worse, as the Atrekna forced the enemy to undergo another revolution, some kept up with the same tactics that had enabled them to carry the battle previously while still others tried different methods.

It was bad enough that nearly a fifth of their Conclaves and Quorums were forced to hold a single enraged primate in position to keep it from being supported by friendly units or moving to those unit's support, but bringing forth the slavespawn from the breeding ring was only seeming to give the enemy target practice with their weapons that apparently had bottomless ammunition capacity.

The new enemy was different than the Ancient Enemy. The Insectiods have moved with one mind, one purpose, and when their Overmind was shattered the Insectiods had broken into small units, still controlled locally by powerful psions. They were familiar, beings of appetite and logic, as were the Atrekna, and so they were able to be defeated.

The Lanaktallan had been, like all herd species, moving as one coherent whole. While their Overmind had never extended to the battlefield, merely their society, their War Mind was easy enough to recognize and counter.

The Atrekna had fought individualistic species before. They were easily overwhelmed, unable to withstand the Atrekna Overmind.

The new enemy, however, seemed to combine the worst of both cooperative species and individualist species.

They

Phil

Sudden Lee

Go post NSFW jokes somewhere else. If I can't tell my kids this joke, then it is not a DAD JOKE.

If you feel it's appropriate to share NSFW jokes with your kids, that's on you. But a real, true dad joke should work for anyone's kid.

Mods... If you exist... Please, stop this madness. Rule #6 should simply not allow NSFW or (wtf) NSFL tags. Also, remember that MINORS browse this subreddit too? Why put that in rule #6, then allow NSFW???

Please consider changing rule #6. I love this sub, but the recent influx of NSFW tagged posts that get all the upvotes, just seem wrong when there are good solid DAD jokes being overlooked because of them.

Thank you,

A Dad.

Well, toucan play at that game.

Martin Freeman, and Andy Serkis.

They also play roles in Lord of the Rings.

I guess that makes them the Tolkien white guys.

She said apple-lutely

This week I discuss the advantages and disadvantages of Fog Cannons for dust suppression in mining. A fog is a high-powered fan or jet with specially engineered nozzles sprays dust suppressants to bind dust particles. The fogging process involves the action of fog nozzles which nebulize water into very small micro-droplets of water under pressure. The fog drives airborne dust particles to the ground and wets the surface to prevent fugitive dust particles. The water atomized mist produced has a small particle size range and its particle size can even be less than 10 microns. When water is combined with dust in the air, due to the adhesion of the surface of water molecules, it will be combined with the dust, and the effect of gravity will drop after condensing, to achieve the purpose of dust suppression

Link: https://globalroadtechnology.com/fog-cannon-dust-suppression-advantages-and-disadvantages/

'Eye-do'

This is my first post pls don't kill me lol.

The people in the comment section is why I love this subreddit!!

Cred once again my sis wants credit lol

Keep in mind, my son is 4 years old, so everything is an original to him.

I had to work late into the evening yesterday, and he was just going to bed when I got home. I had left home for the office nearly 14 hours prior, had a long day, lots of meetings, traffic, etc.

When I walked through the door, I was exhausted, run down, and starving. My wife hugged me and asked how my day was, and I replied, "Done. It was a good day, but has got me exhausted. I just want to grab a bite and go to bed. I'm hungry."

From my son's bedroom, I hear him shout, "Hi Hungry! Nice to meet you!"

Not only did it make me laugh, but I completely forgot about how hungry and tired I was. I went to his bedroom, and we laughed together about it. It was exactly what I needed.

Edit: Thanks for all the awards, kind strangers! I'll let my son know y'all enjoyed his joke too!

I heard parents named their children lance a lot.

First post please don't kill me

Edit: i went to sleep and now my inbox is dead, thank you kind strangers for the awards!

TL;DR: Head of USSR Air Force counterintelligence talks about his experience with organized UFO research. The academy of sciences and the ministry of defense jointly conducted the research from ~1981 to 1990. He claims that the military learned to "summon" UFOs by artificially increasing the concentration of military equipment/intensification of operations. Talks about two cases when witnesses claimed to be in brief "contact" with UFOs - these cases are not widely known, but these reports seem to be real. Two leading hypothesis for UFO - unknown physics phenomena or aliens. Most interesting passages are in bold.

Earlier today there was a post about an interview of a Russian general Alekseyev (https://www.reddit.com/r/UFOs/comments/nr5b1b/russians_made_first_contact/), where he shared some interesting stuff. I found an interview of a different general - Vasiliy Eremenko, who was a KGB airforce counterintelligence chief in the 1980s (see the old photo and his 2016 photo attached. Parts of the interview share the same stories as Alekseyev's interview. Also, here's a link that shows that he was indeed in KGB administration: http://shieldandsword.mozohin.ru/kgb5491/structure/3GU/3.htm That is, he is a real person).

V. Eremenko in the 1980s or 90s.

V. Eremenko in 2016.

The interview came out on the website of a government affiliated organization called "Russian World" (Русский Мир) in late 2016. It was supposed to come out in the print version of the journal, but didn't. "Russian World" also scrubbed the interview from their website for whatever reason, but it made its way elsewhere on the internet. I attach the google translation of the interview here, which is pretty good except for a few unimportant things).

The interview starts with a discussion of airplane crash investigations and then continuous on with a discussion of UFO research. Eremenko was one of the people overseeing the program called Setka ("Catching Net", or "Grid"). It ran from 1977 to 1990 and was supposed to be succeded by a different program called Galaktika (Galaxy), but neve

Hi Reddit readers, In this review i take a look at the Artemis MTL RTA from Cthulhu Mod. The Artemis MTL RTA was supplied for the purpose of this review by Joshua from Cthulhu Mod.

https://www.cthulhumod.com/artemis-mtl-rta/

https://preview.redd.it/it77rnxhbw871.jpg?width=1200&format=pjpg&auto=webp&s=030a0d4197b4a094b786d96e6ca76664013ba77c

Introduction

Cthulhu Mod was the first manufacturer i came across that bridged that gap with some of their early RDA's and RTA's between mainstream and High End while keeping prices reasonable, of course now Thunderhead Creations and BP Mods are very similar with both Dovpo and Aspire with their Manufacture collaborations also upping their game in this regard!

Cthulhu Mod despite recently releasing a couple of Mods are rebuildable specialists and here we have their latest MTL RTA The Artemis. With a unique look and clever way of inserting airflow pins which allows swapping out while not disturbing your build this has a very interesting design. With adjustable AFC also having 5 settings and 4 different bore size airflow pins plus the option of no airflow pin gives 25 different airflow settings ranging from tight MTL to loose MTL, and even sketchy RDL. Also coming with alternative matching smoked tube and 510 drip tip and packaged in a useful deep tin with screw lid let's check out The Artemis MTL RTA from Cthulhu Mod!

___________________________________________________________________

In The Box

https://preview.redd.it/sw3yow2kbw871.jpg?width=980&format=pjpg&auto=webp&s=cd29421868a83e874ee87831d49d99dccbfee504

Contents:

Artemis MTL RTA
1.0mm, 1.4mm, 1.8mm, 2.0mm air pins
Alternative 510 smoked drip tip
Alternative Smoked Poly Carbonate tube section
Spare O-rings & Post screws
Legendary Blue handled Screwdriver
Manual

___________________________________________________________________

Aesthetics

I have always liked how Cthulhu Mod package their products, at one time they use to come in flip lid boxes with cushioned lining and a hemp like material on the outside with a nice badge and cord with tassel to finish it off! Nowadays we have more toned down packaging as they instead come in useful deep tins. Here we have a deep round tin wit

Windows