https://np.reddit.com/r/AskEngineers/comments/4ge0dn/how_do_isps_and_modems_actually_obtain_the_right/d2h5zue
I would like to track both ship traffic and air traffic, as well as be able to listen around on the HF ham radio bands at the same time. Is this possible with one SDR receiver?
Has anyone noticed a difference in symptoms between once a day or multiple times a day? I have had an orgasm twice a day before and I don't think it was as bad as once one day and another the day after but I can't be sure. What about an orgasm after another immediately, does anyone have any experience there?
Reading a a topic on POIdcenter on delayed onset this may provide a lot more information on what could be going on there on the surface if there is more trends in orgasm frequency.
For example this week alone it's been on my mind, funny how I can remember these events, and possibly thankfully I can remember anything in the last 12 months
How normal am I? For context, 51 next birthday, still in the peri menopause (last period 10 days ago, before that was September 2021) on HRT since February 2019. Mild AD to aid sleep (7 hours vs 4 hours, strongly recommended)
- Almost put the instant coffee in the fridge. Twice. I scared myself this week
- I write daily post it's or lists, but I need to put the lists under the kettle as I don't see them on the side in my tiny galley kitchen. You can barely fit 3 people standing up. I forget they are there
- I have a 6-point checklist sellotaped to my work monitor for when I leave the house: Keys, purse, mobile, mask, shopping list and bag. I've been shopping without one essential item for so long I needed to make a permanent list
- Alarms on the phone to take medication once a day. I forget if not.
- Lost a carton of milk one Friday, I knew I had made a cup of tea an hour ago and could not find it. Found it in the pasta cupboard the following Monday
I'm interested to read if you ladies forget how to write cursive too? My handwriting is out of control. I will miss letters out completely, merge 2 letters together or interchange B and D (think Sunbed, and my brain writes Sundeb)
Communication networks have various ways of having several sources transmit their messages together, like frequency division, code division and time division. Just realised humans use TDMA!
Anyone else here have the experience of encountering your twin energy in another body? I’ve begun a relationship with someone who has a very similar natal chart to my twin, very similar personality, his voice is almost a dead ringer, same eyes, and even a birthmark that is the same… is this unique? Anyone else experiencing this?
At a high level I'm wanting to get away from my sequencer playing one note of fixed length every step. I know about the concept of Krell patches, but I want divisions/multiplications of a clock to generate melodies with varying note lengths related to that clock (eigth notes, quarter notes, half).
Is there a module that does this? Otherwise Im thinking of patching stuff up in VCV rack as a proof of concept.
Conceptually I'm thinking I use clock dividers/multipliers with various clock rates, hand those to a switch - are there switches with random access?
The tricky bit is waiting till the gate completes beore sending the next one. So I guess I'd want some sort of inverted gate based on the gate, a not logic opperator would do I suppose.
When the gate ends it should retrigger the switch to go to the next state.
I can then use these gates to move my sequencer forward per step, and also trigger envelopes.
Am I overthinking this? Or anyone have suggestions of an alternative approach?
Hello everyone,
I have set up and configured "Snapshots Replication" on my DS920+, however every time I open the app I receive this error message:
https://preview.redd.it/rtu6tsjw8s681.jpg?width=1092&format=pjpg&auto=webp&s=ec170efb5ded70a7ced2beb03d0bb90ea4a6144e
When I open the Store Manager app, the 'Record File Access Frequency" setting is nowhere to be found.
I think I have seen that setting somewhere else, but I cannot find it at all now. Could someone please point me in the right direction?
Thanks in advance.
https://preview.redd.it/x3wo2agn9s681.jpg?width=2196&format=pjpg&auto=webp&s=24b223e968ebc3aa55da92d0e5ce33cd1b3ab5c5
I would love to learn how to properly set up the organisation sharepoint so the staff across different teams can collaborate effectively via the sharepoint.
I’ve used SDR before to listen and pipe the decoded signal into another program, but what about multiple signals?
How would I tune to multiple frequencies and pipe different decoded signals into a single program?
I'm Carbonite 1, at the end of the season do I promote to Bronzium 5 or can I be promoted to higher leagues/divisions?
Image drawn by IG:Cagy.draws. Check out more of their work!
Valorant Community Circuit Discord: https://discord.gg/6cHkGnqUVy
Twitter: https://twitter.com/ValCircuit
Can an antenna work at two frequencies in different bands (eg. at 10 GHz and also at 30 GHz). I don't mean simultaneously or anything, just how is it possible when both frequencies have such different wavelengths? Wouldn't the antenna be way to large/small for one of the frequencies?
Can anyone also recommend a good textbook on antennas please, I clearly don't have enough knowledge about them.
I want to transfer the code in my access card to an RFID ring for easy and quick access and I want to know what frequency it uses so that I can buy the matching hardware, However the card has nothing written on it and I can't seem to know how to know which frequency it uses.
Plz help
My problem is that i have multiple rectangle signals with varying frequency (50 Hz to 20 kHz) and varying duty cycle (aka PWM). Now I'd like to combine those into a single channel somehow. The reason is that I want to play multiple tones on a buzzer (actually a tesla coil, but let's keep it simple) with each tone coming from another source.
I've tried a simple OR and AND gate, but both loose a lot of the original frequencies and behave different with a different amount of sources. (It should work with about 1 to 6 input channels).
I thought about a combination of several gates, but then I thought there has to be an existing solution out there. Do you know of anything? Thanks.
Hi guys, I may be being stupid here but is there a way to have multiple tank variants in a division template? Say I want a light tank focused on soft attack mixed in with a light tank focused on a mix of soft and heavy. I know how to add SPArt and SPAA but can you mix different main line tanks within a single division template?
https://youtu.be/qITlQwrWG9c?t=2624
