NTD: got a WEN 12 inch, 5 amp variable speed drill press. I wanted to fit it in this rack, so I used an angle grinder to remove some height (cut column lengths seen on the side).
Alpine Corporation WCT202 Tiered Column Tabletop Fountain w/ 3 Candles, 11 Inch Tall, Brown $59.99 ->$29.57
homeygrail.com/product/al…
Kubla Khan is the tallest and most massive column in Arizona’s Kartchner Caverns. It is 58 feet tall and can be found in the Throne Room. Growth rate of 1/2 inch to 1 inch every 100 years.
Welded two 1/2x1/2 inch tubes to eliminate flex in the column.
Steering column wont line up anymore after 3 inch body lift. was lined up first time lift was on then lifted cab back up to put extension and now wont line up after. 97 gmc sierra
reddit.com/gallery/payrqy
Had to add eight stiffeners and two 6 foot plates all full welded because the demo guy couldn't see a 13 inch column
v.redd.it/samh8ny4jtg71
This device (fish flasher) corresponds in a radial readout clockwise to depth, and will show where fish are in a water column to the inch
My reflux column is only a inch diameter, I have to run super slow. Was wondering to cut cost and having to build a new one, could I add a small pipe like I drew to allow vapor past the packing, while it still refluxes. A bypass of sorts to allow vapor to pass faster but not allow it to puke
How many elements and at what wattage to heat a 15.5 gallon keg still attached to a 4 inch column?
Porch screening identification help. The columns are an inch wide and feels like metal. Anyone know what this type is called? Home built in late 30s.
316 Stainless column baseplate. 4X4X3/8 to a 1/2 inch plate. Just wondering what people think.
Solid porch columns, 14 inch square base x 5 feet tall. Turned from clear pine except the square base that is made from laminated Spanish cedar which is both rot and insect resistant.
Thinking about putting a body lift on my 99 2500 suburban, what else would have to be modified if I were to add a 2 inch body lift (steering column, shift linkage, etc)?
This column of dead pixels appeared yesterday on my brand new 27-inch iMac. Sent it to the authorized service center today. Pls send your prayers.
v.redd.it/xe7dgq8kwmg51
IB Online School: a homework list written on 1/4 inch graph paper, following the lines, with no spacing, in two columns.
*Cries
https://preview.redd.it/gh8ycjgavlv41.png?width=539&format=png&auto=webp&s=cf8c2488d67025ef2e4889fcd33b0747f73b9369
Anyone know of a bracket for hanging things on 15 3/4 inch cinder block wall footer columns that doesnt damage the wall, simular to link in text.
I want to hang lights around my yard and i need a bracket to mount to the wall without damaging/drilling into the wall.
i found this but it is to narrow and in the UK. anyone know of anything that would curl around the edges of the cinder block wall footer collumns to hang something like lights or decorations?
https://www.clipnhang.com/21CHB.html
Zone 7 (mid-eastern US). 8 inch flower columns on 5 to 6 foot stalks. Note frilly leaves. June blooms coming to an end.
This is under the dash of my 2012 Dodge Avenger sxt plus. It is about and inch and a half square and has three wires coming out of it. Brown, black, and purple. On the drivers side to the left of the steering column. Any ideas what this could be? And what it is used for?
3 inch pot column to a 2 inch reducer onto my boiler. What effect?
I'm wanting to make a 3 inch pot still column, what effect would reducing from a 3 inch column down to 2 inch at the boiler? The reducer is a threaded nipple and would be reduced to 2 inches for about 70mm if that makes any difference. Should it really be 3 inch all the way into the boiler?
Also is it ok to have my column straight at the top which would reduce to half inch before going into 90deg bends and into a condenser or should the column be 3 inch 90deg bend at the top then reduced down to half inch and into a condenser? I might be looking into this too much but I'm just thinking of the materials available to me. Thanks in advance!
The Pakis talk loud shit about women's rights and safety in India because the hysterical Indian English media turn everything into breaking front page news. Meanwhile the Pakistani media only report rape and murder of Pakistani women in a single inch column buried deep inside Urdu newspapers.
Stainless 2 inch or 3 inch pot still column? Shotgun or liebig condenser?
I've decided against de-tuning my copper reflux column and instead decided to fabricate a stainless column with copper mesh in the base for sulphur removal. I'm just a little undecided about the column size I should go for. Material for a 2 inch column is more readily available to me but if a 3 inch is more beneficial then I could probably fab something up if its worth it? The only thing would be scrounging up elbows, or could I fabricate a T-piece connection where the column changes direction 90deg? The other thing is would a shotgun condenser be better than a liebig condenser? The liebig I would be reducing to 1/2 inch with either a 3/4 or 1 inch jacket. Thought?
I added the HDMI column for the 15 inch G4 imac. Is this right?
Built this cross flow condenser for my 3 inch column. Anyone with experiences they can share?
Charlie Column has made contact with the Emu's "Omega" column. We are severely outnumbered. A fighting retreat towards Adelaide will be conducted. We will sell our lives dearly for each inch in order to give u/sullyhandedIG's evacuation efforts as much time as we can.
m.imgur.com/y0yVQfH
A bitcoin is like - a right to publish 1 column inch in a worldwide digital newspaper ( My grandfather understands this )
Like a property it can be given to another party in payment for goods and services, or sold for dollars.
My take on making Bitcoin technology easier to understand for the uninitiated.
[WANT:USA] 3.5 inch roman column for GPU support. Can pay
I should probably get calipers to measure it exactly, but I feel like my PC build needs a roman column in it, and I thought a GPU support would be the perfect place to add one.
I searched shapeways, and people were charging $130-350 for roman colums about 8" tall, so I didn't even inquire about the cost for a 3 inch one
edit: perfect file found: https://www.thingiverse.com/thing:549780
or-- thing:103918
Ad in a 1912 Popular Mechanics - about 5-6 column inch ad
Would a 1.5 inch connection to a boiler inhibit the output on a 2 inch boka column?
Since there isn't really an easy way to connect a column to a non keg boiler (that I've found), would using a 1.5 inch to 2 inch adapter and a copper slip fitting (http://m.lowes.com/pd/1-1-2-in-x-1-1-2-in-Copper-Slip-Adapter-Fitting/3522722) affect the output of the 2 inch column?
Please note that this site uses cookies to personalise content and adverts, to provide social media features, and to analyse web traffic. Click here for more information.
