Overly excited geth armature v.redd.it/2xb803bfml671
πŸ‘︎ 269
πŸ’¬︎
πŸ‘€︎ u/osingran
πŸ“…︎ Jun 21 2021
🚨︎ report
β€œIt’s over, Armature! I have the high ground!”
πŸ‘︎ 2k
πŸ’¬︎
πŸ‘€︎ u/TurrPhennirPhan
πŸ“…︎ May 21 2021
🚨︎ report
Turning the commutator on an armature can be very satisfying if you have the right tool, complete hell if you don't. reddit.com/gallery/o7ujsb
πŸ‘︎ 60
πŸ’¬︎
πŸ‘€︎ u/whiskey_baconbit
πŸ“…︎ Jun 25 2021
🚨︎ report
Armature Cardboard Conservationist Bakes cards for science.

"Amateur"

Hey folks just wanted to share my newest experiment. I'm learning how to repair paper and have been working on some MTG cards removing ink and flattening. Wanted to share some of my experiments. This one is where I cooked some cards so i could see the damage that was done to them and at what temp. Hope it helps others. I had been chatting on reddit with some people regarding worries about leaving cards in the car in the summer heat.

Honestly, the results were pretty benign at low temp, but baking your cards at higher temps gives them an interesting look.

https://cardboardconservation.blogspot.com/2021/06/how-hot-can-card-get-before-it-becomes.html

πŸ‘︎ 53
πŸ’¬︎
πŸ‘€︎ u/CardCargo
πŸ“…︎ Jun 25 2021
🚨︎ report
I'm having a dickens of a time importing Synty characters into Blender for editing. No matter what I set the armature orientation to the bones point in funny directions. How can I fix this?
πŸ‘︎ 36
πŸ’¬︎
πŸ‘€︎ u/AdelineOnAFarm
πŸ“…︎ Jun 24 2021
🚨︎ report
Do I need doll armature pliers for furby spine?

Armature pliers for 1/4" doll armature all seem to be in the Β£30-35 range, which is way too expensive for me. Is my armature likely to come in one long strand? Will pliers be necessary, or can I avoid them?

πŸ‘︎ 57
πŸ’¬︎
πŸ‘€︎ u/snophnoph
πŸ“…︎ Jun 17 2021
🚨︎ report
Tig welding copper connections on a DC motor armature reddit.com/gallery/ni76vt
πŸ‘︎ 482
πŸ’¬︎
πŸ‘€︎ u/raptor464
πŸ“…︎ May 22 2021
🚨︎ report
Armature with Rigid body causing other rigid bodies to fling away without contact upon start of animation, cannot find any solution online v.redd.it/q0s0dkmrjnx61
πŸ‘︎ 374
πŸ’¬︎
πŸ“…︎ May 07 2021
🚨︎ report
What is wrong? I added an armature modifier to the body, named the vertex groups the same names as the bones. Assigned the vertex gropus applied all the modifiers on the body. Still this happens. What did I do wrong? v.redd.it/38ah3y227s571
πŸ‘︎ 7
πŸ’¬︎
πŸ‘€︎ u/Thypex
πŸ“…︎ Jun 17 2021
🚨︎ report
Added plants and curtains per suggestions, but it feels super armature and I don’t know what else to do. I dislike the hanging lamp but not sure what else to put there for light. I thought about a arc floor lamp but feel like that’ll block the pictures... and maybe that’s ok? It’s missing color too
πŸ‘︎ 147
πŸ’¬︎
πŸ“…︎ Apr 24 2021
🚨︎ report
[Self] Armature! Here's an armature for a girl from my previous post. Some of you guys,asked me to show. Basically there are 3 aluminium wires 1-1.5 mm which are held together by a thinner wire. You screw the frame to the stand. reddit.com/gallery/numghg
πŸ‘︎ 91
πŸ’¬︎
πŸ‘€︎ u/watchme_sculpt
πŸ“…︎ Jun 07 2021
🚨︎ report
On the 20th my youngest son turned 12 & he wanted a grafitti skateboard cake. It took me almost 3 days and I was almost 15 minutes late to his party but he loved it! (VERY VERY armature pls be kind :))
πŸ‘︎ 151
πŸ’¬︎
πŸ‘€︎ u/karmar13
πŸ“…︎ May 23 2021
🚨︎ report
Armature landscaping project before and after. Not much but I'm happy with the results reddit.com/gallery/ndd5cu
πŸ‘︎ 115
πŸ’¬︎
πŸ‘€︎ u/8bit_revolution
πŸ“…︎ May 16 2021
🚨︎ report
Nikon ZII, Z 85mm 1.8, f2.8, 1/500s iso100. 7 months old rough collie Alita! I'm an armature fyi πŸ€— reddit.com/gallery/o3x1it
πŸ‘︎ 5
πŸ’¬︎
πŸ‘€︎ u/Alexyeve
πŸ“…︎ Jun 20 2021
🚨︎ report
Alternative to armature?

Im thinking of making my first fursuit! I have a huge head, around 59, closer to 60 cm circumference or 23/24". Searched the web and only found styrofoam that are not of my head size and canvas blocks but idk whether they would work.

Any recommendations?

πŸ‘︎ 5
πŸ’¬︎
πŸ‘€︎ u/BLKJplays
πŸ“…︎ Jun 20 2021
🚨︎ report
Changing the Mako is fine, but if we cant use it to stun lock a geth armature/colossus then it is unplayable

Exactly what the title says.

Cant use the mako to throw geth into the lava on therum or into the sea on virmire = Unplayabale

πŸ‘︎ 109
πŸ’¬︎
πŸ‘€︎ u/Jaded-Throat-211
πŸ“…︎ May 08 2021
🚨︎ report
Armature Will "Certainly be Interested" in Making ReCore 2 opattack.com/armature-stu…
πŸ‘︎ 58
πŸ’¬︎
πŸ‘€︎ u/thehandsomeraider
πŸ“…︎ May 26 2021
🚨︎ report
Such an armature
πŸ‘︎ 74
πŸ’¬︎
πŸ‘€︎ u/Common-Use6631
πŸ“…︎ May 29 2021
🚨︎ report
Recently built my own Rogue Idol model - at 120mm tall and on a 75mm base he's a big lad. Made from melted sprue plastic over a brass wire armature reddit.com/gallery/np7w9f
πŸ‘︎ 124
πŸ’¬︎
πŸ‘€︎ u/S0ld4d0
πŸ“…︎ May 31 2021
🚨︎ report
Working on the wiper assembly for my 1969 Beetle, and I'm unsure about the motor. I've seen two types of wiper motors, this style like in the 1967 and the other style with the armature off to the side. It is a 12 volt car. Is this the correct motor for this year, or did someone swap it out for this?
πŸ‘︎ 7
πŸ’¬︎
πŸ‘€︎ u/DoctorWhoniverse
πŸ“…︎ Jun 23 2021
🚨︎ report
Does anyone have information on making custom FBT armatures?

Asked about a week ago for data on FBT armatures. Making them, adjusting them, their scaling needs/requirements, anything really and so far haven't had anyone offer much of anything.

Iv read and reread the VRC's info docs multiple times, watched several videos, and talked with other creators only to have found very little on this topic.

Having to figure this all out on my own is simply very time consuming and so far most of my experiments in getting various models working in FBT have ended in multiple types of failure. Most commonly being hip tilts, torso tilting, knees bent, legs stretched out, arms over reaching, or compressing flat. But the reason WHY those happens or what their fixes are is different for most models and I just can't figure them all out! Some needs the heads for upper arm bones moved. Some needs the upper legs moved. Hip can be not centered. Hip/Spine/Chest can be out of wack. View point can be too high/low. After trying all of those fixes, some several times over, there are STILL models that fail in FBT for no foreseeable reason!

Iv found no good way to figure anything out so far and mostly just resort to forcing 1 FBT armature onto everything else. But that often forces me to edit the models as well. For a Human model, you can adjust it to be "more human" such as adjusting the long limbs of MMD models. Sounds easy enough, but it simply isn't that easy when problems persist for some unknown reason. And editing the model of a non human, but still rather humanoid, causes its own problems and can ruin the design of a character if edited too much. I have multiple avatars both human and humanoid that "should" work in FBT but simply don't.

Know Im asking for a lot about a topic seemingly almost no one knows anything about. But this is getting to be insanity levels of frustration from not knowing why avatars that should work in FBT break nor knowing how to fix them.

πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/chewy201
πŸ“…︎ Jun 20 2021
🚨︎ report
A few armature photos of a brigadine armor called Fafnier reddit.com/gallery/nwaen7
πŸ‘︎ 22
πŸ’¬︎
πŸ‘€︎ u/Sathenus
πŸ“…︎ Jun 10 2021
🚨︎ report
I figured out how to use armature in Blender! This means I can now do FNF poses for a mod :P
πŸ‘︎ 26
πŸ’¬︎
πŸ‘€︎ u/moggychicken
πŸ“…︎ Jun 05 2021
🚨︎ report
Picked off Bear Mountain in NY. Grandma used to eat in korea. Does not know english name for it. Google translate it as 'armature' which I dont think is right.
πŸ‘︎ 147
πŸ’¬︎
πŸ‘€︎ u/misteroyi
πŸ“…︎ May 02 2021
🚨︎ report
Anyone interested in needle felting here? I have tons of wool, needles, foam, armature materials, and more to sell. I am getting rid of all my belongings and I'd like this to go to someone who is excited about it. imgur.com/YXlE3Ah
πŸ‘︎ 27
πŸ’¬︎
πŸ‘€︎ u/HeyRainy
πŸ“…︎ May 31 2021
🚨︎ report
Project update: got new brushes but the motor is still having the same problems. It seems the motor runs until the brushes line up with the black line on the armature (pictured bellow) does anyone know what could be causing this problem?
πŸ‘︎ 4
πŸ’¬︎
πŸ‘€︎ u/Patari2600
πŸ“…︎ Jun 07 2021
🚨︎ report
Learning how rigs work. Lesson 1. Don't scale armatures.
πŸ‘︎ 669
πŸ’¬︎
πŸ‘€︎ u/MrCetirizine
πŸ“…︎ Mar 26 2021
🚨︎ report
Armatures, mass graves are where it at!
πŸ‘︎ 34
πŸ’¬︎
πŸ‘€︎ u/reallythinkso
πŸ“…︎ May 31 2021
🚨︎ report
Ez go golf cart? Is this armature just about shot? Or is that the way its supposed to be?
πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/noXXXforme
πŸ“…︎ Jun 05 2021
🚨︎ report
1st tree and 1st time using air drying clay on an armature, was considering adding higher branches but I think I'll leave the middle open as a platform for stealth characters to hide in the trees reddit.com/gallery/o1dgki
πŸ‘︎ 13
πŸ’¬︎
πŸ“…︎ Jun 16 2021
🚨︎ report
Recourses on monarchism for armatures.

Hi r/monarchism. Long Story Short, I'm trying to find some modern-day sources of pro-monarchism.

I see a lot of anti-monarch, but not the other. I've always had a attachment with monarchism, as my family had very close ties with the former shah of Iran, and I've always liked her majesty the Queen (I'm from the UK) but want to learn more about it from a beginners perspective. Any recommended books, YouTube videos, documentaries, articles etc that I could start with?

Thanks all for this really cool subreddit, and keep the before and after memes up!

πŸ‘︎ 13
πŸ’¬︎
πŸ‘€︎ u/Doctorwhowho14
πŸ“…︎ Jun 09 2021
🚨︎ report
Working on the wiper assembly for my 1969 Beetle, and I'm unsure about the motor. I've seen two types of wiper motors, this style like in the 1967 and the other style with the armature off to the side. It is a 12 volt car. Is this the correct motor for this year, or did someone swap it out for this?
πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/DoctorWhoniverse
πŸ“…︎ Jun 23 2021
🚨︎ report
Any Armature Choir Groups in Town?

My wife has always wanted to join a choir group but does not go to church. Is there a group in town that might take her? She is mid 40s and Asian if that helps... She always loves the choir groups on Americas Got Talent and other shows like that.

Thanks,

πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/distearth
πŸ“…︎ Jun 06 2021
🚨︎ report
Burned up motor on my DW735 Planer: Do I replace field and armature?

I was running my planer hard when it started smoking. I took it apart and found that it looks like the field unit overheated. I know I need to replace the field unit ($80), but what about the armature ($180)? The burnt black marks on the armature are easily buffed off. It looks like the field unit expanded when it overheated.

https://preview.redd.it/rqg5ewcxcw471.jpg?width=3024&format=pjpg&auto=webp&s=ea2877e2ae541461efa2a1fcceee7a9de5cecb9f

https://preview.redd.it/xj91gucxcw471.jpg?width=3024&format=pjpg&auto=webp&s=034e5b87c6004c50844eb52088e29c2ead315dac

https://preview.redd.it/o71dcmdxcw471.jpg?width=3024&format=pjpg&auto=webp&s=80f14014ec9944934cc53373cdeb8490110a1df0

πŸ‘︎ 8
πŸ’¬︎
πŸ‘€︎ u/Oddtimer
πŸ“…︎ Jun 12 2021
🚨︎ report
Trying to work on a full sculpture instead of just little charms, and it's hard!! I like the head, but I had to rip it back off of the body armature I was working on and scrap the whole thing to try again... Wish me better luck this time around. Anyone have any tips or tricks?
πŸ‘︎ 38
πŸ’¬︎
πŸ“…︎ May 20 2021
🚨︎ report
Nikon ZII, Z 85mm 1.8, f2.8, 1/500s iso100. 7 months old rough collie Alita! I'm an armature fyi πŸ€— reddit.com/gallery/o3x1it
πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/enlightenevery1
πŸ“…︎ Jun 20 2021
🚨︎ report
Can a single bone be patented to an object outside the armature?

My character is holding a sign and I have some IK rigs for the arms. The sign is just another object in the scene: a rectangular plane. I would like to position the hands on the sign, then parent the hands to the sign so that I can reposition the sign and the hands will stay stuck to it. How could I achieve this?

πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/Cryptikfox
πŸ“…︎ Jun 16 2021
🚨︎ report
I’m a 17 y/o armature astronomer (I bought all of my equipment myself) who’s spent about 8k on various cameras, telescopes, software and the mount. AMA
πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/ApilotThatisRadom
πŸ“…︎ May 20 2021
🚨︎ report
Tali and Liara vs. Geth Armature: Liara lifts it and Tali hacks it reddit.com/gallery/noobp6
πŸ‘︎ 37
πŸ’¬︎
πŸ‘€︎ u/homo_onlineus
πŸ“…︎ May 31 2021
🚨︎ report

Please note that this site uses cookies to personalise content and adverts, to provide social media features, and to analyse web traffic. Click here for more information.