Hi All: I have one of these bad boys: https://www.sylvane.com/nilfisk-gd930-canister-vacuum-cleaner.html for cleaning up an old-house that has some lead-paint and although it is a great performer, I'm really missing on-board storage (since this is really more a commercial vac.
This is a shot in the dark, but I was wondering if anyone had any brilliant ideas of how to tie the cord/hose to the body for storage/facilitate a parking sort of action like you would see on a miele for instance.
TIA
I picked up a HEPA Nilfisk GD930 from an occupational safety shop to use for regular vacuuming in my pre-1978 house. Just in case I run across lead dust. Overkill? Maybe. But she's a nice machine and the price was right.
However, as a Miele man before, the attachments in comparison are... wanting. Looks like she takes 32mm ID attachments--will 1.25 inches work just as well? It is a HEPA so I want it to be as sealed as possible (not sure at the attachment even matters). Is there anywhere that sells metric standards in the states online. There have to be other vacuums on this standard over there across the pond. Nilfisk hasn't bothered to make it easy to buy their attachments and they don't have a parquet/hard wood brush anyway.
Hi all,
I was hoping I could rely on your collective expertise re the above. The hose no longer clicks into the gun. The green O ring is still present on the end of the hose, but as soon as I turn the water on the hose shoots back out. I bought a new gun thinking it could have been a problem with the connection mechanism but it still has the same problem. Any thoughts? Appreciate any help in advance.
Kære alle,
Jeg startede med investeringer juni 2020 og forsøgte mig først med investere små 500kr i Nilfisk. Den er siden steget med ca. 80% - heldigt for mig. Dog føler jeg mig en smule dum ikke at have kastet flere penge i aktien. Samme er tilfældet med mine Unity Tech. aktier.
Pt står Nilfisk til ca. 145kr, men var helt oppe i 240-350kr mellem 2018-Q1 2019. Efterfølgende er den faldet indtil september 2020, hvorefter den bare er gået opad. Nu overvejer jeg at købe for 5000kr ekstra i Nilfisk. Hvad tænker dkfiance om den investering? Er det en dårlig idé at investere mere i en aktie som er steget så meget på relativ kort tid? 500kr bliver aldrig til ret meget, selv som langsigtet investor over 5-10 år.
Én lektie jeg har lært er, at det ikke kan betale sig at investere mindre end 5000kr. pr aktie.
Hi, do any of you guys know much about Nilfisk washers? I've had a C120 for about 17 years and managed to keep it going but it may well have given up the ghost finally. I'm currently looking at the micro switch but it seems these spares aren't available in the UK so if I can't repair the valve part then it's adios. I was just looking at the current ranges and wondered what the practical differences (apart from the pressures) were between the C, E and P versions were. I'm guessing they're just 'better' in that order but was wondering if that's evident in build quality etc i.e. does the E version seem sturdier. Not a professional but I am occasionally asked to do the odd drive and path etc. and will be using it for my own patio/path/van.
Jeg har en alm 125,7(afair) nilfisk højtryksrenser med dertil tilhørende den der sprøjtepistol til, den med en lille beholder og så bruger man den typisk til at sprøjte sæbe på bilen fx.
Fik sp en tanke om, om man ville kunne bruge den til at sprøjte træolie ud med, for ligesom at sprøjtemale/oliere noget træværk, olien er sådan ok tyndt flydende så burde kunne gå på den måde.
Det er så ligeså meget om man kan rense den det sprøjtepistol ordentligt igen? Nogen som har erfaring/tanker med det? :p
My problem is that the machine doesn't stop. When I turn it on it suddenly starts spraying with med-low pressure. If I pull the trigger its pressure increases. Releasing only makes the output waters pressure decrease not stop. Before this thing came up (I wanted to tell the normal process, sorry for my bad English) I turned it on and it started to take water to its pressure hose then its engine stopped to wait for me to pull the trigger. I pulled trigger and I normally powerwashed. If I released it would stop normally.
Hi all,
I was hoping I could rely on your collective expertise re the above. The hose no longer clicks into the gun. The green O ring is still present on the end of the hose, but as soon as I turn the water on the hose shoots back out. I bought a new gun thinking it could have been a problem with the connection mechanism but it still has the same problem. Any thoughts? Appreciate any help in advance.
