Anyone familiar with the following products ? It’s what I can find easily locally to use in homeware/gfrc
Plasticizers -rapid set flow control
Polymers -sikaR latex additive -lanco concrete fortifier -quikrete acrylic concrete fortifier -El-Rey adacryl concrete admix
I’ve already found sources for -AR chopped fiber -AR fiber scrims -rollers -spray up gun -PVA fiber -Portland cement & sand
The major goal of this research is to use nonlinear finite element analysis to investigate the strengthening of reinforced concrete (RC) beams with CFRP. The models were created using ANSYS finite element analysis software, which was used to investigate the influence of key parameters on the response of reinforced RC beams under flexure and shear. Seven models were created, four for flexural strength and three for shear strength, taking into account the effects of two primary parameters: the number of CFRP layers and CFRP strengthening by continuous U-wrapping. The ANSYS results were in good agreement with the previous research's experimental findings. The ultimate capacity in shear and flexure improves for strengthened RC beams with CFRP layers and U-wrap, with U-warp proving to be more effective than CFRP layers.
Please see the link :- https://www.ikprress.org/index.php/AJOMCOR/article/view/1027
Keywords :- CFRP, finite element modeling, nonlinear analysis, strengthening, reinforced concrete beams.
- Indonesian in Indonesian jungle area
- Local seller of building materials just said they will now carry GRC boards, but they dont know much about it
- I was able to get the brand name and got some little info on a website
- It seems they say you do the following, space them 4mm apart, fill with compound, apply fiber mesh tape, add 150mm width compound down the seem. Then after its dried, add 300mm width compound down the seam. After its dried then you can sand it.
- My concern is that, can I sand the compound seam all the way down to match the board? I dont want the compound seam to be above the board where it looks weird
- I was told that, to finish the exterior wall with GRC, I just need to do paint sealer, and then paint on top, I dont need to apply mortar to the entire wall.
- Also, what compound do I use? I see on our online tokopedia shopping website, many compound is available, they use it often here for drywall gaps, do I use that same type? I guess not because it will wash away for my exterior wall?
- Village leader told me to add "white cement" to the compound to make it stronger and prevent hairline cracks and water concern I had. I think white cement is the limestone powder?
I wanna work on fiber-reinforced concretes (with waste fibers). After reading different papers, I decided to investigate mechanical properties of FRCs under monotonic and cyclic loading in tension and bending (with different loading frequencies). I should mention that we have DARTEC machine in our lab, so no limitation for different tests. Do you have any other attractive suggestions and details that I should work on them?
Weapons
AA50c15c Fixer
AA50c15fr Railway
AAE Railway
AA50c25 Lever
BFFR SF LMG
BE 50 Cal
B50c15c M79
B50c25 Auto Grenade Launcher
BFFR90 Auto Grenade Launcher
B50c1S DCG
BE Minigun
BFFR Minigun
B50c25 .44 Pistol
B2525 Single Action Revolver
B50c15c Cyro
Ber50c25 Fixer
F50c25 Fixer
F2525 Tesla
Gor50c25 Fixer
GorE90 Railway
GorSS+1S Boneclub
JUG2525 Handmade
JSS1S Lead Pipe
J50c25 Combat Rifle
J50c15c Handmade
J50L25 Bow
JE 50 Cal
J2515c Railway
JSS1S Bowie
JSS1S Lead Pipe
J2525 Pipe Pistol
Mu2525 Railway
Mu2515fr Gat Laser
Mu2525 Tesla
QFFR 10mm Sub
QFFR Railway
QE1P Railway
QFFR Gamma
QFFR Tesla
QFFR Mini
QFFR15c Gat Laser
QFFR Broadsider
Q50VHC25 Broadsider (Sold)
Q50c25 Flamer
Q50c15c Lever
QAP15fr Gatling Gun
Q2525 Hunting Rifle
Q50c15c Laser Pistol
Q2525 Single Action Revolver
Q50c25 Single Action Revolver
QE Pipe Bolt Action Pistol
QFFR FMSWA Fixer
Sole Survivor
StE25 Fixer
TS3325 Fixer
TS2525 Railway
Unstoppable Monster
VE25 Pipe Bolt Pistol
ZE25 Fixer
Good ideas about fiber-reinforced concretes
I wanna work on fiber-reinforced concretes (with waste fibers). After reading different papers, I decided to investigate mechanical properties of FRCs under monotonic and cyclic loading in tension and bending (with different loading frequencies). I should mention that we have DARTEC machine in our lab, so no limitation for different tests. Do you have any other attractive suggestions and details that I should work on them?
I wanna work on fiber-reinforced concretes (with waste fibers). After reading different papers, I decided to investigate mechanical properties of FRCs under monotonic and cyclic loading in tension and bending (with different loading frequencies). I should mention that we have DARTEC machine in our lab, so no limitation for different tests. Do you have any other attractive suggestions and details that I should work on them?
