L6 Puns

My TH is L6 (133/300)...

It's currently in the Club Shop...

Is L6 to L7 worth dropping 20 club cards on it, or should I let it progress naturally?

The reason I'm asking is because, I use my Maxed Rock WAY MORE in T9/T10.

In fact, I use the Rock like 60/40% more than my L5 Apocalypse 🤷🏼‍♂️

Thanks in advance fellas, much appreciated 🙏🏻 😎...

①Improvement of Writing: Instruction

1, See the below “☆Basic Example Dialogue”, Try to write single sentences or Dialogue style with Grammar topic “どこで” and post your sentences in 48 hours from posting this thread.

2, Beginner Level: It is OK to write just simple sentence by only Hiragana. (It is easy-to-read to make space between word and word). Millions of mistakes are necessary for improvement, so you do not have to hesitate.

3, Intermediate Level: See the below “☆Advanced Example Dialogue”. If you use this time Grammar topic “どこで” at least once, you can make your dialogue freely. It is also OK to add more Person A&B part to make longer Dialogue.

4, I will comment and correct your sentences. Although I cannot respond to all (Especially, off topic) because I have limitation of time, I try to comment. Welcome Reddit account follow.

②Example Dialogues

I cited below [*1] sentences from Page50, Lesson 6, 練習A-3 in みんなの日本語 初級Ⅰ第Ⅱ版 本冊. I added “[ ] My grammar interpretation”.

“☆Basic Example Dialogue”

A あなたは　 どこで　 こうちゃを　 かいましたか。 [*1]

anatawa dokode kouchawo kaimasitaka

Where did you buy black tea?

[どこでmeans where. かいます is Transitive verb so it requires Noun+を. You can omit　あなたは.]

B わたしは　デパート で　 こうちゃを　 かいました。[*1]

watasiwa depaato de kouchawo kaimasita

I bought it at the department store.

[To indicate a place where an action happens, we use “Place + で”. You can omit　わたしは and こうちゃを and you can say デパートでかいました。]

“☆Advanced Example Dialogue”

A: 今日、学校が終わったら、一緒（いっしょ）に宿題をしませんか。

B: いいですよ。どこでやりますか。

A: 大学の図書館はどうですか。

B: 今、試験期間(しけんきかん)なので、混（こ）んでいて席（せき）がないかもしれませんね。初台（はつだい）にある図書館に行きませんか。

A: あそこなら、人が少なくていいかもしれないですね。じゃあ、初台に行きましょう。

If you add [ ] explanation and English translation, it will be helpful to understand and correct your sentences more accurately.

③Reference

3A Corporation 2012, Minna No Nihongo Second Edition - Elementary Japanese1 Translation & Grammar Notes – English, 3A Corporation, Tokyo.

ISBN-10: 4883196046

スリーエーネットワーク（2012）, 「みんなの日本語 初級I 第版 本冊」, スリーエーネットワーク.

④Question and Comment

If you have some questions about topic, ask me on the comment section. Although I cannot respond to all (Especially, off topic) because I have limitation of time, I try to comment back.

(Educational post, once a week)

Classic Army Microgun GAS/HPA - Asking $650 $635 shipped + fees OR BEST OFFER.

I haven't even shot a single BB out of this thing. Have only tested gas and battery through it. Never fielded, obviously. Feel free to make offers! Don't have any more details on this because it's just out of the box new. There are plenty of videos on YT on this thing if you're looking to grab this. Deciding to go another route. WILL MEET UP FOR LOCAL SALES, if needed. (@ Airsoft Extreme in Santa Clara)

WTT value: $700~750ish.

WTT: Would like to trade for GBBRs + cash or EOtech of the following: VFC MP5 GBB V2 w/ mags, GHK AK74U VFC URGI 14.5 w/ mags, any MK18/RIS II GBBR (no KWA, or bad brands), TM MWS 14.5, EOtech EXPS3 (must be 2020-2021), EOtech EXPS2 (must be 2020-2021), EOtech G43 or G45 (must be 2020-2021).

SOLD

WE Desert Eagle L6 .50AE Silver Tiger Stripped - Asking $215 shipped

Out of box new. Never fielded. More or less an impulse purchase because of Garand Thumb. Come to found it's heavy as hell, clocking in at 3-4lbs. A cool piece none the less. Gas magazine, no leak. Comes with upgraded aluminum magazine base and Laylax upgraded hammer spring. Original box included.

WTT value: $265

WTT: UNITY G33 Mount in BLK (This is what I will trade for) Authentic ONLY. They're worth $190-215 so it's a fair trade with no cash on your end. Straight trade.

---------------------------------------------------------

My rules:

• PayPal G&S ONLY. (Other payment methods are up to you.) Please use the PayPal Fees Calculator
• NO NOTES.
• Please comment "dibs" on which item(s) you want. Dibs have priority. If you do not response within 2-3 hours of calling dibs on an item, I will move on to second, third, etc.. dibs.
• Cash is also an option if we're doing local meetup. I prefer cash in person though.
• Please kindly leave a comment before sending chats or PMing. I will not deal with anybody that doesn't leave a comment.

My Trade Policies:

• You will need to ship first, no exception. I have over 100 transactions on this sub so you can guaranteed I will go through with the trade. I will pay my own shipping. You will pay your own shipping.
• Once I've received the item and check that everything's in order, I will s

How much do they get paid?

As the titles says, Does the Rack, LIVE and bean version come with this model or is it in a pack?

Cheers

Hi folks. I'd like to hear your thoughts on my situation and what my next step should be.

I've been an EMT for 23 years and have had many minor back injuries over that time.

Anyway, I started experiencing severe sciatica this summer, which prompted me to get to my doctor and then a spine specialist. Initially, I had some sciatica on my right side, which was cured with rest and a round of methylprednisolone. About a week later the sciatica showed up on my left side and just kept getting worse. My GP tried the steroids again with no effect. I did 6 sessions of physical therapy around this time, which didn't seem to help.

After an MRI showed a herniation in my L5/L6 disc, my spine doctor opted to start me on 900mg/day Gabapentin and try an epidural injection which did not have any effect on my pain. The Gabapentin never did do anything for me either. At this point I had very severe pain shooting down my left leg to my foot. I required a cane to walk and could only walk very carefully.

He then said it was time for a discectomy. The surgery went well and I could actually stand pain-free while in the recovery room. All was great for 2 weeks. I twisted ever so gently while throwing away a piece of paper and felt a twang in my lower back. I had electric sensations shoot down to the top of each buttock. It quickly reduced to a 3/10 ache in those areas. The next day the pain had reduced even more but I could still feel it. Ever since then, I've been experiencing what feels like numerous different injuries to the same site. I would lift something a little too heavy and it would hurt for a couple weeks and then get better. But I never went more than a week or two without hurting my back again.

My pain currently is all around my lower back. It doesn't radiate to my butt or legs like it did pre-surgery. When I sit I'm mostly pain-free. When I stand up, I have severe pain in what feels like my actual spine, forcing me to bend over and use a cane. After walking for about 2 to 3 minutes, I can put the cane down and walk around upright. When first standing, it feels like I'm using all of these accessory abdominal muscles just to stand and avoid the pain and then the pain mostly dissipates, allowing me to stand. My back will still hurt if I were to bend any direction more than just a little bit so I keep the cane close by.

Full disclosure: I live on a small farm which requires daily chores having to do with pigs, a steer, and some chickens. My wife and son took over th

Throwaway…duh. I will answer as honestly as possible while still protecting my IRL name, location, site, real Reddit account, etc. I don’t want to be fired or ID’d by anybody. If I’m vague that’s why. Please read the FAQ below. I can only speak to my experiences at the sites I’ve worked at (yes it’s more than one and less than ten) and YMMV. FAQ: What is your TC (Total Compensation)? Base salary is $125K, 30 RSUs, $25K year 1 bonus, $20K year two. Pretty much no raises for 4 years. Do managers get more/better benefits? Nope. Same options as everybody else. We even accumulate vacation and PTO at the same rate as full-time blue badge associates. What are you doing on your computer all the time? Everything. Running the building essentially. It’s really a lot and would take far too long to explain here. Do you fire people? Yes. Way more than I like, and no matter the reason, I try to be nice. I don’t need to get to my car and find four flat tires. What about Hr? Managers like them as much as the associates do. Same goes for learning. And safety. And facilities. What about all the rules and policies? We have to enforce all of them. Even if we think they’re stupid and pointless and some are stupid and pointless. How did you get this job? I interview well. Really well. I have a degree or two and 15 years prior management experience with a large company, leading large teams (500-1k people plus). I also hired a professional resume writing service. I’m sure there’s more and I’ll answer questions asked once. If a question is asked more than once, I’ll likely ignore it. I try to respond promptly but I work too and I have to sleep eventually. Please be patient I’ll get back to you and, last of all, be nice. Don’t be a jerk. We all have opinions and that’s what’s beautiful about being human. Disagree and move on. No need to attack anybody.

Edit: I will continue to monitor this post for additional questions for as long as I can. Ask away. I’ll try to answer as quickly as possible.

Check it out. Just got it to work. Big Lebowski theme!

I used a Raspberry Pi Zero with libUSB to control my L6 Spider V amp over USB. It was a pain to figure out communications. Most of it was trying to reverse engineer the protocol over USB. I'm thankful for Wireshark in this effort. After that the rest kinda fell into place. The wife used her Cricut machine for the awesome artwork. It looks like a rats nest of wires, but as a first project, I'm pretty proud.

I still have a few bugs to fix, but it's 99% done and usable. If you're curious about the code, check me out on Github: https://github.com/stric9r/Line6-FBV3-Clone

I got a lot out of this project, learning about USB, Linux development, and using Wireshark for detailed analysis.

https://preview.redd.it/ql2izden1c781.jpg?width=4032&format=pjpg&auto=webp&s=d56efde82193fa3fd36f808812f3d0b2c8630f41

https://preview.redd.it/mpbg3s8p1c781.jpg?width=4032&format=pjpg&auto=webp&s=83c7ad3609219f6c5b00699d84cdac06ced93d53

https://preview.redd.it/yy6psc0q1c781.jpg?width=3024&format=pjpg&auto=webp&s=694c33c9bcf4002baa16a45bcdf4372a028ed0c2

https://preview.redd.it/r7rb8cyq1c781.jpg?width=3024&format=pjpg&auto=webp&s=6b173dfbf6db3e5f377f405d0c5fef8dc7c413b6

https://preview.redd.it/mc049ptr1c781.jpg?width=3024&format=pjpg&auto=webp&s=e1e6a2a2bea89950a0927a1842e054af14f0b622

I'm seeing a weird behavior with my new Convoy L6 with GT-FC40 and a pair of KeepPower protected 26500 batteries.

When batteries are freshly charged I have no issues. But when the battery voltage is around 3.74V, when I first turn on the light on Medium (or turn on and switch brightness to Medium), after about 5 seconds the light blinks exactly three times on low and stays on low brightness. It completely overrides memory mode.

It started happening yesterday and after charging the batteries it was fine. When I run the batteries down to that ~3.74 V voltage, it starts happening again. Doesn't happen in the other three brightness modes or higher voltage levels.

If I didn't know any better, I would think that this is a weird undocumented battery voltage check feature as it is so consistently reproducing. Maybe it's telling me that the batteries are halfway drained? Lol.

Has anyone seen this before? I contacted Illumn where I bought the batteries and they don't think this is a battery issue. Is it an L6 firmware glitch perhaps?

Should I be using heart balloons L6 (595) or ?-block L7 (408 but could take to 450)?

Using the L-1 x base points I assumed heart balloons but wanted to check 🙂

I have a Tripp Lite Basic PDU (PDUV30HV) plugged into my L6-30P in the garage. Haven't had a power outage yet here in Florida, but was wondering how these handle during a spike or brownout. Do they make a UPS? Would an UPS even work with with a PDU seeing they are pretty much a PDU themselves.

Just worried that when this spikes it may not distribute that power evenly to my mining rig and about 50+ Chia HD's. How does everyone handle these situations?

Is there any one out there that uses the L6 Tsunami religiously? Mine just hit L6, the BG is horrible, but I damn near dropped a looong chip with it 😳??? I'm going to mess with it more. Just curious if there's any mega L6 Diehard Tsunami users...

I'm at 357 million and almost completely bored outa my mind with T9...

I was wondering what your bankroll was when you left T9 for 10 almost exclusively???...

If my math is somewhat good, I've got 116 (rounded up) buy'ins. That seems extremely low for a full go at 10🤷🏼‍♂️?...

Thanks in advance guys and gals...

Everything

---------------------------------------------------------

Classic Army Microgun GAS/HPA - Asking $650 $635 shipped + fees OR BEST OFFER.

I haven't even shot a single BB out of this thing. Have only tested gas and battery through it. Never fielded, obviously. Feel free to make offers! Don't have any more details on this because it's just out of the box new. There are plenty of videos on YT on this thing if you're looking to grab this. Deciding to go another route. WILL MEET UP FOR LOCAL SALES, if needed. (@ Airsoft Extreme in Santa Clara)

WE Desert Eagle L6 .50AE Silver Tiger Stripped - Asking $215 shipped

Out of box new. Never fielded. More or less an impulse purchase because of Garand Thumb. Come to found it's heavy as hell, clocking in at 3-4lbs. A cool piece none the less. Gas magazine, no leak. Comes with upgraded aluminum magazine base and Laylax upgraded hammer spring. Original box included.

"Trijicon" ACOG TA31RCO-A4 - Asking $120 shipped

Probably the BEST clone I've seen. Selling it because I have no build to slap this on. Would keep it for a future M16A4 or Block II but I'm pretty sure I won't get any anytime soon. I'm pretty sure this was made for the M16A4 or A3. Fits on A1 carry handle with ease or any carry handles, really. Reticle is pretty nice and it's daylight bright. Engraved trades. Comes with QD mount, as well.

Trex Arms 556 Placard w/ Haley Strat X Harness in Ranger Green - $110 shipped

Never fielded. Only LARP in. Was meant as a backup piece. Comes with 8492 padding for comfort. Will fit S-L sizes.

---------------------------------------------------------

My rules:

• PayPal G&S ONLY. (Other payment methods are up to you.) Please use the PayPal Fees Calculator
• NO NOTES.
• Please comment "dibs" on which item(s) you want. Dibs have priority. If you do not response within 2-3 hours of calling dibs on an item, I will move on to second, third, etc.. dibs.
• Cash is also an option if we're doing local meetup. I prefer cash in person though.
• Please kindly leave a comment before sending chats or PMing. I will not deal with anybody that doesn't leave a comment.