I've been having an issue determining the proper levels in my many different tracks to find the right balance in the mix for any given song that I have.
In many tutorials and videos that I've seen people work on mixes, I notice that most of the track stems that they are mixing have very high levels, constantly hitting yellow and red peaks on their individual meters. Even for tracks that aren't necessarily driving the entire song and they don't still overpower the main tracks that do.
On the contrary, in my own productions and mixes, I often find that I have several tracks where I have to lower the audio considerably to the point where they're barely peaking at the lower end of the meter between -15dB and -50dB. If i try to raise the volume, they soon overpower other elements in the same FQ range. If I mess with the EQ on these tracks, it usually ends up sounding very dull and unnatural.
Because of these issues with general balance from track to track, I often go back and forth between making tiny volume adjustments to a lot of tracks while monitoring at a high level because I can't hear everything in detail otherwise.
I'm confused at what I may be doing wrong. Am I supposed to use limiters or compressors? Is it a flaw in production? Does it really matter if I have the main driving pianos at -10dB and the background supplemental strings at -40dB if it sounds neatly balanced? How is it that almost all the tracks in this are all hitting yellows and red peaks and not overpowering each other like in my own production/mixes?
I hope someone who's been through this early on in their developing mixing skills could shed some light on it. I appreciate everyone who takes the time to voice in.
What i need is some good one shot or premixed concentrate so i can mix that 10-15-20% flavors to desired pg/vg and thats it... i have bought some eliquids from malaysian sites so Any asian sites suggestions would be helpful for shipping to india easily...
Hi I am trying to build a pull up bar in my backyard. I have been reading about what to use to make them strong .
So far I am thinking digging a deep enough hole should be the priority and let the ground hold it. But what about around the post? should I use Concrete vs PostMix or expanding foam?
I am 220lb and 6.3'' tall, So I need something that is very durable for a long time and wont move and swing around
ANy thoughts?
I am using a 55 gallon barrel to premix a large batch of water/food.
Filled a half barrel first time to make sure everything was alright and noticed after checking the barrel afterwards that there was alot of what seemed like algea or some kind of buildup. also the tubing that was inside the barrel for the pump i use to water was
white or seemed to have some growth
When i noticed it I freaked out and cleaned it all up and didn't refill it until I went to my local hydro shop to ask about it.
I mentioned to my local hydroponics store and showed them pictures and they said that it was just buildup from the nutes and that it was nothing to worry about and to just clean the barrel after everygrow.
I imagine that if i did a whole grow like this my pump and everything would be absolutely covered in this stuff.
I suspect that it is either that the barrel is too warm(if i put my finger in the whole for hoses etc it feels quite warm or if i open the top and look in its warm on my face), or the nutrients arent very clean and the nutes I'm using are the shops house line so they just wanna say its normal.
I've since purchased a 1000gph pump to circulate the water, and added a small dose of UC roots to the barrel. Since the beginning 2 water stones aerating the water.
Am I wrong to be thinking that the water should stay relatively clean over a matter of just a couple of weeks?
Here's a imgur link to the pic i took after the first grow https://imgur.com/a/plJMta5
After my next water the barrel will be empty so i will check it again and post again a picture of it.
Pics: https://imgur.com/gallery/mmRgSBB
I finished building this a few days ago, and after filling it and bleeding the air out I reassembled the case. Turned it on and...nothing. The damn pump decided it would die minutes after being run to fill the loop. I made sure not to run it dry, so I think a cable just broke internally. I didn't have it mounted so it just sort of hung by the tubing, so maybe the wires were flexing too much.
Bought a D5 pump to replace the dead Swiftech MCP50X and rebuilt the loop last night. This pump is damn near silent, even at full speed! At stock settings, my 8700k gets to about 62° running P95 in-place FFTs. IntelBurnTestV2 gets it to about 65°. Gonna work on trying to get a stable 4.8 GHz under 65°. I might also delid, since I had great success with my old 3570k and some Conductonaut LM paste (over 15° reduction).
Can't see a problem with it, just curious if it's doable. Will they spoil?
Edit: Everyone is saying how lazy I am. I work at a gym teaching classes every hour. I have a 5 minute gap between to talk to clients, eat, go to the bathroom etc. I left a premixed shake in the fridge for almost a week, tried it yesterday and it was fine. I try to get something in my body every 3 hours so I'm always looking for ways to make it quicker and easier. And btw I use ON Gold Standard Whey.
I’m a new RX8 owner (2004 6speed) I’ve looked into detail about using Premix, but I’ve also contacted one of my Local Mazda’s and talked to a mechanic there who recommended I didn’t use Premix and let the car burn oil normally and just make sure it’s always topped up. Any opinions?
Hi fellow editors
Im doing assistant editor work for a german series, and a long email was sent to me with the requests from the editor there is this only sentence i cant understand, if anyone can help i will be really glad!
Using Media Composer in case.
the guy i went for a rebuild to recommended a half ounce of premix (currently using lucas 2 stroke oil) per gallon during a refuel. do you guys think this is a good ratio?
I want to make some premix stubbies of Gin, I want some with tonic water and the missus likes hers with lemonade. My question is how can I make them? Can I use off the shelf softdrink? Or do I need a forced carbonation set up? Any help would be appreciated. Cheers guys.
Right now, every time we have to make gels in my lab we make the mix from scratch (water, buffer, SDS, polyacrilamide mix).
I was thinking, is it possible to make the premix of all that (without temed and APS, of course) and store it?
I'm switching my moped over to premix,, what do I mix the gas at for my Yamaha qt-50? Now my oil light is gonna come on telling me i need oil but will it hurt if it stays on after doing this?.
