Is This Connector For Trailer Wiring "Standard"?
πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/nobbyv
πŸ“…︎ Nov 19 2020
🚨︎ report
Do you think the Fatshark dominator V2 + two antennas + 3s lipo and xt30 connector for 75 euros is a good deal and still worth it over standard emax kit goggles?
πŸ‘︎ 47
πŸ’¬︎
πŸ‘€︎ u/Rodent1357
πŸ“…︎ Nov 29 2021
🚨︎ report
Had anyone seen a fuel tank connector like this? My "standard" Amazon quick connect fuel line only had two hole for these options so it can't connect to this. Help is appreciated!
πŸ‘︎ 3
πŸ’¬︎
πŸ“…︎ Jan 06 2022
🚨︎ report
Thinking about doing fan upgrades for my Ender 3 v2 and have a question regarding some of the standard fans' connectors.

I've seen recommendations for Sunon, Noctua, and Orion fans in various Ender setups to achieve silent printing or better cooling. I've been reading up and trying to make a decision on some fans and realized that if I wanted to swap fans out for a different setup, I would have to re solder them each time. But that sounds like it sucks. Do all of the fans use the same connectors? I would like to wire up a set of the female connectors to the wire so that I could easily plug in fans instead of soldering directly. But I would need to know the exact details on that connector type to buy them and whether all fans, specifically the ones people use on Enders, use the same connectors.

Side note, has anyone ever figured out how to 3d print connectors?

πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/ninjakitty7
πŸ“…︎ Jan 17 2022
🚨︎ report
What cable is used on the new Optical Digital Audio Out (TV model is OLED65C1AUB)? I have never seen a square shaped optical cable connector and the documentation is lacking. Standard S/PDIF (Toslink) is not working for me.
πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/stratmancj
πŸ“…︎ Dec 01 2021
🚨︎ report
Anyone know what this weird USB connector is (right)? It's like a smaller version of mini USB. Spec calls it an "8 pin mini USB". Standard micro (left) and mini (center) for comparison.
πŸ‘︎ 35
πŸ’¬︎
πŸ‘€︎ u/danielrosehill
πŸ“…︎ Nov 06 2021
🚨︎ report
LF books, documentation, or web links about different standards, connectors, plugs within the DC especially regarding power for North America

Just looking for references on this topic. Interested in any vendor. Thanks.

πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/yuredarp
πŸ“…︎ Dec 11 2021
🚨︎ report
Correct way to estimate this wire antenna's frequency? Just total wire length, or are other factors involved? Are pictured insulated standoffs OK, or will the metal near the wire cause issues? Any sort of balun needed for receiver w/ standard 50 ohm BNC connector?
πŸ‘︎ 7
πŸ’¬︎
πŸ‘€︎ u/DelosBoard2052
πŸ“…︎ Oct 31 2021
🚨︎ report
I just found out this adapter for Julet motor connectors to standard exists.
πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/liftedup_nsfw
πŸ“…︎ Oct 19 2021
🚨︎ report
Are there any popular ESC and flight controller combinations that use standard connectors rather than having solder pads?
πŸ‘︎ 8
πŸ’¬︎
πŸ‘€︎ u/WarAndGeese
πŸ“…︎ Jan 19 2022
🚨︎ report
Question. If I set my ISO (ASA) to 400, why there are 3 positions under 27? I understand that 27 is just different standard. But why there are 3 positions? I believe that all three will not change my ISO 400. Perhaps I can tweek ISO little bit in allowed interval? Thanks for your comments
πŸ‘︎ 4
πŸ’¬︎
πŸ‘€︎ u/JKoudela
πŸ“…︎ Jan 09 2022
🚨︎ report
Could we get an updated planner where week 1 starts at january 3rd, which seems to be the ISO standard? and for it to go up till 52 weeks, instead of just being the week of the month? I think this would be useful for those of us that plan in weeks. reddit.com/gallery/s8tr6q
πŸ‘︎ 4
πŸ’¬︎
πŸ‘€︎ u/DanielMedYT
πŸ“…︎ Jan 20 2022
🚨︎ report
What the heck size is this tap?? I have tried like 5 different sizes and been to several plumbing stores to be told "Sorry you wont find connectors for this size tap as its not standard" reddit.com/gallery/osl89v
πŸ‘︎ 2
πŸ’¬︎
πŸ“…︎ Jul 27 2021
🚨︎ report
50% OFF! NOW: $19.99! #1 Best Seller [Amazon] Kuject 120PCS Solder Seal Wire Connectors, Heat Shrink Butt Connector Waterproof Insulated Electrical Butt Terminals Wire Splice for Automotive Marine Boat Truck Trailer Wiring

50% OFF!

NOW: $19.99!

#1 Best Seller

[Amazon]

Kuject 120PCS Solder Seal Wire Connectors, Heat Shrink Butt Connector Waterproof Insulated Electrical Butt Terminals Wire Splice for Automotive Marine Boat Truck Trailer Wiring

https://www.amazon.ca/dp/B073RMRCC3

https://www.reddit.com/r/SweetDealsCA/comments/qm1h39/50_off_now_1999_1_best_seller_amazon_kuject/

πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/LilyMcAllister
πŸ“…︎ Nov 03 2021
🚨︎ report
Please don't roast me for this dirty bangerπŸ˜‚ is this normal? Just got a quartz banger for my enail yesterday I use it just like I would use a standard banger minus the torch of course. Take my dab q tip with dry side then q tip again with iso soaked q tip dab temp in comments
πŸ‘︎ 5
πŸ’¬︎
πŸ‘€︎ u/no_pacakged_boof
πŸ“…︎ Nov 21 2021
🚨︎ report
Will I be able to replace this with a Noctua fan? The fan connector appears to be non-standard.
πŸ‘︎ 6
πŸ’¬︎
πŸ‘€︎ u/real_octopus_man
πŸ“…︎ Jan 03 2022
🚨︎ report
As USB-c becomes the standard, one day, we will all start throwing our MicroUSB connectors in boxes and keeping them forever for no reason just like our parents used to store VCR cables.
πŸ‘︎ 28k
πŸ’¬︎
πŸ‘€︎ u/Dark_Devin
πŸ“…︎ May 01 2020
🚨︎ report
XPENG Obtains ISO 27001 and ISO 27701 Certification, Meeting Global Standards for Information Security and Privacy Protection Management crweworld.com/article/new…
πŸ‘︎ 16
πŸ’¬︎
πŸ‘€︎ u/HotMomentumStocks
πŸ“…︎ Dec 07 2021
🚨︎ report
What are the standard pad pitch and pad dimensions of an M2 M2 B+M Key Edge connector? Details are in the comment reddit.com/gallery/rxda6w
πŸ‘︎ 8
πŸ’¬︎
πŸ‘€︎ u/fVripple
πŸ“…︎ Jan 06 2022
🚨︎ report
$SMME Reducing the electronics to miniature scale of less than 0.3mm allowing it to fit inside a credit card that meets ISO standards for such cards has been a long process but one we are glad we set out to achieve https://www.businesswire.com/news/home/20220103005361/en/SmartMetric-the-Leader-in-Cr

$SMME Reducing the electronics to miniature scale of less than 0.3mm allowing it to fit inside a credit card that meets ISO standards for such cards has been a long process but one we are glad we set out to achieve https://www.businesswire.com/news/home/20220103005361/en/SmartMetric-the-Leader-in-Credit-Card-Fingerprint-Biometric-Technology-Has-Created-the-Next-Generation-Credit-Card-That-Has-Inside-the-Card-a-Fully-Functionally-Fingerprint-Scanner-for-Card-User-Authentication

πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/stocktime6
πŸ“…︎ Jan 06 2022
🚨︎ report
Smart connectors piping system vs standard pipe connectors gfycat.com/baggypepperyho…
πŸ‘︎ 4k
πŸ’¬︎
πŸ‘€︎ u/silvercatbob
πŸ“…︎ Aug 31 2021
🚨︎ report
Need iso material testing standards for 3d printing.

I need iso standard books/documents for material testing 3d printed (fdm, PLA) parts.

I need the books for tensile , compression, shear, and impact testing .

If can get the documents it will be of great help.

πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/OkOpportunity3250
πŸ“…︎ Dec 14 2021
🚨︎ report
Hi. Not sure if this is the right sub. My PCH fan broke. DAE know where I can get a 30mm fan (10mm deep) with this connector or a standard 4pin PWN connector? imgur.com/a/ppTvgSi
πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/spergbert
πŸ“…︎ Dec 10 2021
🚨︎ report
Dell has some really beefy PSUs in their servers, even with an breakout-board for standard some connectors .. is there a way to fully adapt them? reddit.com/gallery/mvz8fc
πŸ‘︎ 58
πŸ’¬︎
πŸ‘€︎ u/Flying-T
πŸ“…︎ Apr 22 2021
🚨︎ report
Both 4-pin and 7-pin Trailer connectors worthwhile?

Hey y'all! I've recently joined the wait with an order for a Lariat EB AWD with 4k Tow package - shoutout to Greg at Allegheny Trucks in Pittsburgh for being awesome and helpful!

This will be a daily driver and hopefully very longterm vehicle, that I'm hoping to use the towing from time to time, eventually picking up a simple trailer for hauling a motorcycle and would love to add a small camping trailer to the garage down the line. Long-term capability is the goal.

That said, never having a trailer for my own I'm brought to a question: will the 7-pin trailer connector that comes with the 4k tow package handle all needs, or do more simple trailers only work with a 4-pin input? Currently the build only has the 7-pin, but I want to make sure I'm not shooting myself in the foot for usability down the line.

Thanks for any help, this forum has been great to learn about this cool truck.

UPDATE: If anyone else is looking, seems pretty well confirmed that the 4k tow package does include both 4 and 7 pin connector. Don't waste the $100 adding the extra option to your order folks!

πŸ‘︎ 10
πŸ’¬︎
πŸ‘€︎ u/TheShmooh
πŸ“…︎ Dec 14 2021
🚨︎ report
Just wanted to update everyone for anyone interested. I got this Zenith tv with this 5 prong connector after research and taking back off all you have to do is plug a standard figure 8 cable into the section with the 2 part and it just worked plugged right into the wall. I hope it helps someone :) reddit.com/gallery/oqxbl5
πŸ‘︎ 10
πŸ’¬︎
πŸ‘€︎ u/Theofficalholo
πŸ“…︎ Jul 24 2021
🚨︎ report
30F ISO advice, recently rejected & feeling jaded. Standards too high?

I've been single from 26 to 30, enjoyed very much of that time... but I have to admit, it's getting pretty boring and repetitive. I have many hobbies, a business, and workout 5 days a week. I've had a few list items after my last real relationship (23 to 26). I thought I just set reasonable standards for my self but then I began to question whether I was being too picky. My requirements were no drugs/excessive alcohol, into fitness/healthy lifestyle, interested in traveling, some type of career ambition/interested in FIRE (finding means of financial independence so you don't have to work 30 years or until you die).

Recently I met someone on tinder (32M) who said he was looking for a relationship (I told him tinder isn't generally used for that) and I compromised a lot of my original list because he made me feel SO good, like I've never been treated this way before. We dated for 6 weeks. It's not about buying me things, but just small thoughtful things he did. He would ask me if I needed anything fixed around the house, would do it with a smile on his face and after kiss me and say he loves feeling needed. I asked if he wanted to fix my broken coffee table and instead he surprised me by buying me a new coffee table and setting it up. I cooked for us a few times and one time he saw me packaging leftovers and didn't have enough Tupperware, so one day he surprised me and bought me a new set of Tupperware. He bought me warm fuzzy sock/slippers because we joke about me always being cold. He didn't have a great job but I didn't care one bit because I'd never been treated that way. He asked if I wanted to come over for dinner on Christmas (to which I replied thank you but I think it's too soon to meet parents because that stuff makes me a nervous wreck). He actually had almost none of the requirements on my original list but I was pretty much ignoring it (he wasn't a drug addict but just an average stoner, which I could tolerate). We had a bunch of other things in common, went out on fun dates, and had great chemistry. Out of no where a switch turned and he decided he wasn't into me anymore despite showing me the complete opposite. I asked why he was breaking it off, a few things- all of a sudden he said he's not ready for a relationship again. He said he feels like he moved too quickly. He also said he fucked him self up financially and can't provide for me despite me telling him that didn't matter to me. He felt like he couldn't give me the intimacy I wanted de

... keep reading on reddit ➑

πŸ‘︎ 73
πŸ’¬︎
πŸ‘€︎ u/Girldogworld
πŸ“…︎ Jan 08 2022
🚨︎ report
Is there any place to download ISOs for free? (by that I mean International standard organization, not ISO images)

They cost an absurd amount of money and I am just curious about some of them.

πŸ‘︎ 22
πŸ’¬︎
πŸ‘€︎ u/adiliv3007
πŸ“…︎ Oct 23 2021
🚨︎ report
Hi. Not sure if this is the right sub. My PCH fan broke. DAE know where I can get a 30mm fan (10mm deep) with this connector or a standard 4pin PWN connector? imgur.com/a/ppTvgSi
πŸ‘︎ 4
πŸ’¬︎
πŸ‘€︎ u/spergbert
πŸ“…︎ Dec 10 2021
🚨︎ report

Please note that this site uses cookies to personalise content and adverts, to provide social media features, and to analyse web traffic. Click here for more information.