3 years in, I hate my Samsung Flex Duoβ€”it doesn't hold temps above 350 and Samsung screwed me on the warrantyβ€”and now I want to replace it. Three questions.
  1. What would be a good, non-professional higher-end (than Samsung) range to replace it with? The thing I liked the most about the Samsung was the 22k BTU burner. I don't know the cool brand names.
  2. What do I do with an oven that doesn't hold temps? Do people buy ovens that don't work?
  3. A friend bought something high end for a discount because it was a floor model. How does one find deals like that? Do I have to go store to store?
πŸ‘︎ 5
πŸ’¬︎
πŸ‘€︎ u/haribobosses
πŸ“…︎ Jan 02 2022
🚨︎ report
Leaking (cracked) nut on water pressure tank! How do I temp fix until I can get a new one? Will flex seal fix this problem? reddit.com/gallery/rwed9b
πŸ‘︎ 2
πŸ’¬︎
πŸ“…︎ Jan 05 2022
🚨︎ report
Anyone know the best place to get a deal on a temp tech flex or dab rite?
πŸ‘︎ 3
πŸ’¬︎
πŸ‘€︎ u/Steven_heimburg
πŸ“…︎ Dec 20 2021
🚨︎ report
Temp tech flex better than dabrite! The sensor is twice the size and the usability is fantastic
πŸ‘︎ 7
πŸ’¬︎
πŸ‘€︎ u/PuffcoFan420
πŸ“…︎ Nov 22 2021
🚨︎ report
54" Hi temp flex sidewall hds
πŸ‘︎ 16
πŸ’¬︎
πŸ‘€︎ u/ReallyHeavyBoots
πŸ“…︎ Oct 29 2021
🚨︎ report
Keep getting low battery warning on my display for a exway flex followed by a bms error, anyone know how to fix? Been trying for hours. Boards at room temp.
πŸ‘︎ 15
πŸ’¬︎
πŸ‘€︎ u/Jazzlike-Ad5844
πŸ“…︎ Jul 14 2021
🚨︎ report
Any ideas what difficiency or toxicity I am experiencing? Using flora flex nutes veg 1 and veg 2 at 2 g per Gallon with 1ml per liter of botanicare cal mag. Gavita 900e led at 400-500 ppfd temps 86 high and 77 low, humidity 55 low 70 high water till runoff, p.h. in 6.2-6.7 and runoff 6.2. v.redd.it/stc5ribi4xv71
πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/fullar123
πŸ“…︎ Oct 27 2021
🚨︎ report
How do I calculate trim and flex temp on the A320?

Perhaps a dumb question but I've been leaving takeoff trim and flex temp blank on the MCDU but would like to calculate them for more realism and accuracy. I use simbrief for all my planning (the free version without navigraph) but I don't believe they calculate that for me lol.

πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/eastlywestern
πŸ“…︎ Sep 01 2021
🚨︎ report
Hey folks, I just updated my sim to SU5 and got the new dev version of the brilliant a32nx, however i cannot get rid of this lvr clb warning. I did set my flex temp and after the takeoff i reduced the thrust, yet i did not get rid of it. Any solutions?
πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/rrblgn
πŸ“…︎ Jul 29 2021
🚨︎ report
Amazon β€” you know, the one run by the richest man, the one whose sales have shot up during a pandemic β€” is doing an online fundraiser. Asking all of us to donate to support its warehouse temps & flex drivers hit by Covid. https://amazonrelieffund.org/
πŸ‘︎ 2k
πŸ’¬︎
πŸ‘€︎ u/CausticSPARK00
πŸ“…︎ Mar 21 2020
🚨︎ report
SP Flex new look. The biggest new feature is the iPad temp monitor, everything else pretty much stayed the same but just looks nicer. reddit.com/gallery/iod142
πŸ‘︎ 116
πŸ’¬︎
πŸ‘€︎ u/Micah_Rules
πŸ“…︎ Sep 07 2020
🚨︎ report
Need help this plant has been just been down, not over watered an feeding was yesterday but last few days shes just been looking sad. temp 75 Rh 70 week 4 Veg co2 being used fan circulating air in and out as well as osc fan in room. Flora flex nutes 5 gal fabric pots. Mother Earth CoCo/ Happy Frog reddit.com/gallery/l04zwr
πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/Twiztid11
πŸ“…︎ Jan 18 2021
🚨︎ report
Flex ATX Extension Frame: Perfectly Working, Better Temp but... reddit.com/gallery/k1t3a8
πŸ‘︎ 17
πŸ’¬︎
πŸ‘€︎ u/ONE_HYPERIUM
πŸ“…︎ Nov 27 2020
🚨︎ report
The all flex syringe gun is a MUST if filling carts or syringes! I have a heating wrap that goes around to keep it at my set temp to keep Distillate flowing. 25ml capacity and also have a 50ml as well. The 25ml goes down to 0.5ml increments.
πŸ‘︎ 39
πŸ’¬︎
πŸ“…︎ Jun 11 2020
🚨︎ report
Whats going on with my first layer? The bed is leveled and the squish is pretty good on the filament but I get this weird flex at the corners. Bed temp was set to 60 deg reddit.com/gallery/i49oxz
πŸ‘︎ 10
πŸ’¬︎
πŸ‘€︎ u/BrownieSampler
πŸ“…︎ Aug 05 2020
🚨︎ report
Can someone please help me with this, I've been trying to fix this for months now. Replaced Z motor coupler with a flex one rods nice and straight tried losing the z sqrew tried tightning it, placed with print speed print temps, acceleration, infill, current, calibrations, PID and I'm still here
πŸ‘︎ 5
πŸ’¬︎
πŸ‘€︎ u/LorenzoChapa
πŸ“…︎ Sep 18 2020
🚨︎ report
My baby lady Kami isnt getting better. The temp is 80Β°F. It popped one cyst but it came back and merged with the smaller one. Now the once stunning stripe on her side is swelling (not the scales). 15g Fluval Flex. 2 oto cats. Christmass moss & anubias nana petite plants. reddit.com/gallery/iieo9o
πŸ‘︎ 4
πŸ’¬︎
πŸ‘€︎ u/sourMilkpickles
πŸ“…︎ Aug 28 2020
🚨︎ report
Question on Flex PSU temps

Hi Everyone,

Stupid question time from ya boy shady. So I am running a Enhance 7660-b in my Velka 3 (Strix X570-i, 3600x, 2070 ITX) and after 1-2 hours of playing something something like Gears Tactics at 4k max settings the PSU is super hot to the touch. Is this level of heat under load expected from Flex psu's?
Thank you for your answers in advance. Asking to equal parts learn and quell my anxiety lol.

πŸ‘︎ 2
πŸ’¬︎
πŸ“…︎ May 17 2020
🚨︎ report
How do i enter ”no flex temp” into te MCDU on toliss?
πŸ‘︎ 9
πŸ’¬︎
πŸ‘€︎ u/Webbeboi
πŸ“…︎ Nov 15 2019
🚨︎ report
Equipment and heater guidance. I’m buying a Fluval Flex 15 to sit beside my other Flex. I plan to use this as a shrimp tank. Curious what heater will maintain the most consistent temps for me?
πŸ‘︎ 4
πŸ’¬︎
πŸ‘€︎ u/DavidRZ12
πŸ“…︎ Nov 19 2019
🚨︎ report
Temp apartment flex - where your sneaks match the decor.
πŸ‘︎ 88
πŸ’¬︎
πŸ‘€︎ u/benzarsole
πŸ“…︎ May 27 2019
🚨︎ report
My first attempt at printing Flex PLA, what went wrong? 240 nozzle, 80 bed (max temp), ad retraction disabled, speed 20 mm/s imgur.com/CVH7D6j
πŸ‘︎ 17
πŸ’¬︎
πŸ‘€︎ u/RX8_MMA_420
πŸ“…︎ Mar 16 2019
🚨︎ report
Project flex tape temps
πŸ‘︎ 37
πŸ’¬︎
πŸ‘€︎ u/devonon2707
πŸ“…︎ Sep 11 2018
🚨︎ report
The payware market is missing a performance analysis software often used in real life pre-flight to discern 'intersection-able' takeoffs and flex temps.

Hello all.

As some IRL pilots on here will confirm, a lot of flight decks use a tablet to input all aircraft performance and runway information into a program. These programs provide a detailed report of the performance envelope, taking into account weight, balance, weather, runway, fuel, cost, etc. Think of it as an extension to the FMC, take off speeds are displayed and applied to the specific runway from a database, but it also shows the flight deck what intersection of the runway they can take at the specific airport, and at what flex temp (thrust de-rate). For example, a full A320 will require the full runway and TO/GA at EGGW, but a lighter A320 might use a flex de-rate, and takeoff from intersection A, which is a shorter runway length.

A plugin or add-on like this would would be a decent, realistic addition in my opinion, and I'm not aware of anything out there that does it accurately. It would obviously need to have a huge database of airports with accurate information in order to capture the true realism.

There are some watered down flight deck plugins, but they're more for loading the plane itself, rather than analysing what performance is available with the load and conditions.

TL:DR Tablet software uses loadsheet info to advise flight deck of take off performance options. Mite b cool.

πŸ‘︎ 13
πŸ’¬︎
πŸ‘€︎ u/AJGibbo
πŸ“…︎ Jun 13 2017
🚨︎ report
Would it be safe to use Flex Tape to temp fix (3-4 days) a leaking sunroof?

Just purchased a 03 Cadillac CTS. When looking at the car he said the sunroof didn't work but in reality the seal is all cracked and old and is most definitely leaking into the cabin as the carpet was damp all over. Normally wouldn't mess with a car like this but got an unbelievable deal on it. Haven't checked drain tubes yet as I'm waiting to get it to my dads shop but its currently sitting in my apartment complex.

I know flex tape is a really strong adhesive, but would anyone else recommend just sticking it on there for a few days? Expecting decent rain tomorrow so need something to "seal" it here soon.

πŸ‘︎ 2
πŸ’¬︎
πŸ‘€︎ u/bcarbar
πŸ“…︎ Dec 13 2018
🚨︎ report
Calculatig flex temp

Hello guys, i got the aerosoft bus and that one calculates it for itself. But most planes dont..

What are your guys solutions for calculating the flex temp?

πŸ‘︎ 10
πŸ’¬︎
πŸ‘€︎ u/joost_verm
πŸ“…︎ Apr 05 2016
🚨︎ report
My black and white build reddit.com/gallery/s075vm
πŸ‘︎ 923
πŸ’¬︎
πŸ‘€︎ u/sunfaller
πŸ“…︎ Jan 10 2022
🚨︎ report
My first pack, bought it today. (See comment) reddit.com/gallery/s6ecba
πŸ‘︎ 66
πŸ’¬︎
πŸ‘€︎ u/omelete_2
πŸ“…︎ Jan 17 2022
🚨︎ report
What am I doing wrong with V Speeds? Using FBW on MSFS with SimBrief and each time I click it it says Format Error
πŸ‘︎ 60
πŸ’¬︎
πŸ‘€︎ u/matthewvh
πŸ“…︎ Jan 27 2022
🚨︎ report
Currently viral: a couple of numb, foot appendages, belonging to a temp, hooking up with savvy, drunk, initiated prostitutes who are killing a bird flexing his ass to the sunrise.

Today's dose of internet includes two dazed toes of intern nettin' clued, stewed, hazed hoes offin' tern knittin glutes to day.

πŸ‘︎ 663
πŸ’¬︎
πŸ‘€︎ u/justadair
πŸ“…︎ Dec 27 2018
🚨︎ report
J-pipe & Flex Fuel question.

I’ve got a COBB FF kit, COBB fuel pressure sensor kit, GS EBCS, TGV deletes, DW fuel pump and just ordered a COBB TMIC kit. Planning on keeping the stock air box, but I’m dropping in GS Drycon filter and also doing an EGR unplug as well. Looking for 360-380 WHP. Trying to figure whether a j-pipe is even necessary to get to those numbers. Really itching to install what I have and get tuned. It’s like I have a bunch of boxes of fun in the garage waiting to be opened.

πŸ‘︎ 9
πŸ’¬︎
πŸ‘€︎ u/poloniumpanda
πŸ“…︎ Jan 26 2022
🚨︎ report
πŸ‘︎ 954
πŸ’¬︎
πŸ‘€︎ u/Mickooooooo
πŸ“…︎ Dec 01 2021
🚨︎ report
SERIOUS: This subreddit needs to understand what a "dad joke" really means.

I don't want to step on anybody's toes here, but the amount of non-dad jokes here in this subreddit really annoys me. First of all, dad jokes CAN be NSFW, it clearly says so in the sub rules. Secondly, it doesn't automatically make it a dad joke if it's from a conversation between you and your child. Most importantly, the jokes that your CHILDREN tell YOU are not dad jokes. The point of a dad joke is that it's so cheesy only a dad who's trying to be funny would make such a joke. That's it. They are stupid plays on words, lame puns and so on. There has to be a clever pun or wordplay for it to be considered a dad joke.

Again, to all the fellow dads, I apologise if I'm sounding too harsh. But I just needed to get it off my chest.

πŸ‘︎ 17k
πŸ’¬︎
πŸ‘€︎ u/anywhereiroa
πŸ“…︎ Jan 15 2022
🚨︎ report
Review: 1 year and 14k miles (20k kms) with my 2004 Mazda RX-8

TL;DR: Bought a 2004 RX-8 Grand Touring in Dec 2020 w/ 80k miles / 130k kms from a friend’s dad for peanuts and promptly spent way too much money on mods and fuel over the course of 14k miles / 20k kms doing road trips, track days, and everything and anything.

The car has been an absolute blast to drive and honestly pretty reliable all things considered. If you want to buy one, check out rx8help.com for a read on what you should know.

If I could re-do it all, I might buy a Series 2 RX-8 R3 and do less mods, or just buy the new GR86 / BRZ. It's definitely been a fun journey with this car though!

Pictures

[Summary gallery of my 2021 with this car](https://imgur.com/a/PcsNlyK)

[Photoshoot in its most current spec](https://imgur.com/gallery/7265LA4)

[Night shots with the original body kit](https://imgur.com/gallery/YI3S3Lw)

[Parking garage shot with no aero](https://i.imgur.com/q8EqV11.jpeg)

This is something I’ve been meaning to do (those NSX yearly reviews really inspired me), but u/DarkFire989’s review gave me the kick in the pants to get this started. Here’s my one-year review of my 2004 Mazda RX-8 that I bought in December 2020. I hope by the end of it, you can take away and understand the following:

  • Why I took the leap of faith on this specific car
  • My perspective on rotary / RX-8 maintenance (it really isn’t that bad)
  • The appeal of the car from a tuning and driving perspective
  • Pros / cons and quirks, and comparisons

Going to try to keep it somewhat concise, if you have any more questions on anything by all means ask!

The buying experience

In late 2020, I was in a position to own a car again after deciding that I was going to move out of NYC. Wanted to get into a sports car again (I had an Infiniti G35x daily and NA Miata sports car before) that I could semi-daily (WFH life), and I was pretty flexible budget wise as long as the car was something I would like, a good deal, and generally reliable. I am partial to high-revving sporty cars that’s slightly β€œout of the norm” to help you understand my biases.

I heard of this specific RX-8 in particular as it was my friend's dad's car that he had owned since new. He bought the car new in Aug 2003 (previously owned a 1979 RX-7 and loved that) and drove it daily for years with my friend in the backseat. I always liked the RX-8 from m

... keep reading on reddit ➑

πŸ‘︎ 331
πŸ’¬︎
πŸ‘€︎ u/ItsJustAwso
πŸ“…︎ Jan 09 2022
🚨︎ report
A priest, a pastor, and a rabbit walk into a blood donation clinic.

The nurse asked the rabbit, β€œwhat is your blood type?”

β€œI am probably a type O” said the rabbit.

πŸ‘︎ 11k
πŸ’¬︎
πŸ‘€︎ u/snc8698
πŸ“…︎ Jan 29 2022
🚨︎ report
Notice anything wrong?! There’s a few things
πŸ‘︎ 15
πŸ’¬︎
πŸ“…︎ Jan 03 2022
🚨︎ report
πŸ‘︎ 213
πŸ’¬︎
πŸ‘€︎ u/ImHealy
πŸ“…︎ Nov 28 2021
🚨︎ report

Please note that this site uses cookies to personalise content and adverts, to provide social media features, and to analyse web traffic. Click here for more information.