I don't know anything about community in Pensacola 😓 I'm an artist and I really want to find fellow artists here. Does anyone know how to get connected?
Hi all. Prior to the 9.0 update any files I deleted from a locally connected USB (deleted from another machine via SMB) would show the free space immediately. Now, since 9.0 anytime I delete a file it doesn’t show the free space asa available until after a reboot (eg I delete 100GB it will not make that empty space available until after I reboot.) Any ideas what I can do to rectify this? Thanks in advance.
Howdy all
I bought this asrock x399 fatal1ty motherboard off someone on offerup, however as soon as I pressed the power button the board started smoking. After doing a quick visual on the board it appears they failed to tell me that an SMD on the back of the board was broken off the board (it didn't look "blown" but I don't really know what I'm looking at). was just labelled R10 and I have been unsuccessful in finding what part it could be, as I haven't gotten any real matches. The closest I've gotten is finding a 250mW current sensing resistor (RL1220S-R10-F) but it didn't look the same. The smoke seemed to be coming from the same side as the broken part so I'd wager that it was causing the issue but if anyone else has any thoughts I'm all ears.
Here's a photo of the board and how it was originally attached.
I tried contacting the seller on offerup but they basically told me to pound sand. If anyone here knows anything about this I'd be forever in your debt if I'd be able to find the component and solder it back on. Also on a somewhat related note, one side seemed to have two metal leads coming out of it and the other side only had one, but on the mobo itself both sides seemed to have only one contact.
Mods - please sticky.
Devs - please address.
EDIT: To be clear, I was not telling the devs to change how the paths work. But they should address it, because it is so commonly misunderstood that it should be more clearly communicated. Or whatever they want to do. I'm not going to tell them how to do their job, except to simply point out that a huge number of posts on this sub are about this misunderstanding.
Other than creating a device local dns entry in a hosts file, what are the simplest options available to me. I considered a local network vm of pihole, but that seems overkill. Is it? Does pihole break a lot of sites?
Hi,
I am using elasticsearch with the javascript client, I am using the client to configure the index and to send all the requests.
So my question is where should I place the filter path like 'synonyms_path' for exampleShould I place it inside the project folder and reference it with __direname...?
Or maybe to store it as string in other file and then "copy" it on runtime instead of using path?
Or maybe something else? I am looking for a way that will make it easy for me to see and edit the files while also work seamlessly with both elastic cloud and local elastic (for testing).
Edit:
And also part of my question is, does Elasticsearch "reads" from the file after I set it up in the settings, or in the set up it "copies" the content and then ignore file changes unless I re-create the index?
I just saw some posts here with line selector, with inly 1 pedal per line after. Am I missing something?
Please be kind, I’ve been a witch for a long time but this is my first couple months of delving in to traditional witchcraft.
I’ve read and enjoy Gemma Gary’s books, as well as “The Crooked Path” by Kelden. I feel very connected to the rites and descriptions Gary gives of Bucca. However, I am having an extremely hard time finding any other sources that have any similarities to Gary’s information.
I would love to work with this Bucca, but with more workings in my own land and ancestry as well.
My concern is that Gemma Gary’s description of Bucca is not legit at all, due to the lack of supporting information.
At this point, I have a big pile of information including: Bucca The Folk Devil The Horned God The Old One The Witch Father
And right now, I could not tell you the difference between any of these (besides that most are depicted in various ways).
I definitely want to add deity work to my practice, specifically with a deity who will guide me through the light and dark of this path. I just have no idea how to sort the information I have.
If Gemma Gary’s information is correct, I do feel very called to Bucca. I just need help figuring out all out.
The goal is for a local audience to hear both (or all) ends of a Zoom meeting over external speakers. I can get a variety of mics to work, and remote Zoomers can hear everything fine - both the mics and local audio playback. Everyone in the local site can hear the remote Zoomers just fine. What I have been unable to do is to get the PC to output the local mic to the speakers, either alone or mixed with other audio.
I've tried a variety of physical/electrical interfaces (USB-A, USB-C, audio jack, Bluetooth) with both headset and handheld/lavalier mics. No go.
Then I realized that I've never before tried to have local speakers play back a local mic. Normally, that would not occur to me since (1) I can hear me just fine and (2) I hate feedback.
So before I try more permutations, I thought I'd see if anyone knows if this even can be done, and if so, what configuration(s) worked before.
Any guidance/suggestions/guesses?
I know they don’t need to go through the router because they’re connected to the same LAN but how are the frame transmitted then? Do the two host communicate directly? Or do the wifi acces point act as a mediator?
My 8 year old Plex server died last week, so I had a better a better computer lying around, reloaded Ubuntu 20.04 and installed Plex. All good. I hadn't updated Plex on my old server for over a year, as it kept failing and everything was working. Now I'm at the latest and greatest version and my prerolls won't work, nor can I connect via a browser via my local lan. I was reading on the Plex forum that this seems to be pretty widespread with the latest update. Well, an update was released this morning, I installed it and nothing was fixed. Any of you guys having these issues?
Basically, i have been looking for any comparison on the same image dataset with similar network architecture -- and then comparing the results, stability etc. -- where one network uses LocallyConnected layers(like in TF 2) and the other just uses Conv. These are both locally connected networks but for LocallyConnected you don't have shared weights for the filters.
Hello there,
I'm new to IOTA and I firstly followed this tutor https://legacy.docs.iota.org/docs/core/1.0/tutorials/js/transfer-iota-tokens and find I can't load the faucet page, link https://faucet.devnet.iota.org/ (anyone knows how to solve it?). Then I'm thinking about deploy one locally, but not sure where to start. The purpose of doing this is that I want to deploy IOTA to my IOT devices for communciation (e.g. raspberry pi) and run machine learning model on them. Could anyone help me out? Thanks!
When resistors are connected in parallel, the current has more paths to go through, which decreases the resistance. However, the total current must also split, meaning there is less current passing through each bulb than when all the current passes through one bulb. Shouldn't that make the brightness of multiple bulbs connected in parallel not brighter than one bulb connected with a battery? (Assuming all bulbs are identical)
On the California section of the park the first task is to build the three buildings but when I built paths connecting them it says they aren’t connected. What am I do wrong?
Howdy all
I bought this asrock x399 fatal1ty motherboard off someone on offerup, however as soon as I pressed the power button the board started smoking. After doing a quick visual on the board it appears they failed to tell me that an SMD on the back of the board was broken off the board (it didn't look "blown" but I don't really know what I'm looking at). was just labelled R10 and I have been unsuccessful in finding what part it could be, as I haven't gotten any real matches. The closest I've gotten is finding a 250mW current sensing resistor (RL1220S-R10-F) but it didn't look the same. The smoke seemed to be coming from the same side as the broken part so I'd wager that it was causing the issue but if anyone else has any thoughts I'm all ears.
Here's a photo of the board and how it was originally attached.
I tried contacting the seller on offerup but they basically told me to pound sand. If anyone here knows anything about this I'd be forever in your debt if I'd be able to find the component and solder it back on. Also on a somewhat related note, one side seemed to have two metal leads coming out of it and the other side only had one, but on the mobo itself both sides seemed to have only one contact.
