Esau’s see saw sea sauce ease Aziz awe, seize Aussies a see-saw.
Further questions, are there any papers or sources on how the evalution for that equipment went and what they exactly did with all of the Stuff they suddenly had.
Also why was e.g. the Mi-24 Hind not reused by the German Airforce seeing as it was a widely successfull combat helicopter.
Hi all, I'm just starting to plan my Sprinter conversion and am doing a ton of research / planning in advance. I'm starting with electrical and plumbing, since those are the parts that seem like they constrain the design space most and need to have groundwork laid first. The trouble I'm running into is that there doesn't seem to be something like "the digikey/mcmaster-carr of conversion van equipment", a place with high quality products (ruling out amazon), and a selection so vast that they're more concerned with helping you search than promoting some item.
Don't get me wrong, I think there's a lot of value in forming a relationship with a distributor so that you can ask questions and get sanity checked, but so far I haven't found one that has carried everything that all the others carry, which means I haven't found one that won't try to steer me towards the products they happen to have. What I'd really like, in the absence of finding the "we target companies instead of individuals, and we carry everything" distributor, is to find a list of as many equipment brands as I can, so that I can manually compare and contrast their offerings. Yes, I know there are a lot of them, I've been reading lists of inverter/chargers for several days at this point... and I still get the suspicion I'm missing big names.
Does such a thing exist? If not, is there interest in compiling such a list as a wiki page for this subreddit?
This guy Alph4 off of steam was in my csgo game he bottom fragged and played shit the whole game I was in a 4 man so at the end we kicked him for being a toxic bottom fragger, he then added me to tell me thx for kicking and as he didn't lose to which is bs but then said he ranked up as well he then got defensive and started saying he was in the army and what battalion he was in and what bulllshit story he had to say so i called him out and what he wasnt expecting is that my family have been in the army so i decided to call him out and after looking up his battalion which was a real thing, however got dispanded in 1944 after ww2 and they never fought overseas apart from ww1. he then proceeded to block me and remove me as a friend since i called him out, the following is the text chat.
[23:28] Wizard: what'
[23:28] Alph4: You win some, you lose some. Good game. Also thanks for making me lose no ELO :))
[23:28] Wizard: haa okay m8 r u aware u lose more elo fuckhead?
[23:29] Alph4: Actually I lose nothing. Due to a kick I don't lose anything. :))
[23:30] Wizard: haha ok keep getting kicked n see if u derank
[23:30] Alph4: I was never awarded with game xp meaning I never completed the match.
[23:30] Wizard: haha ok bud try getting kicked every game and see if u derank why dont u think cunts do that everytime they lose??? coz ur fucken stupid cuntr
[23:31] Alph4: And don't go off @ me, Your friend went 8-19 Yikes.
[23:31] Wizard: hes silver 4 XD what rank r u
[23:31] Alph4: gn1? WAIT AHAHA I GOT A RANK UP TO GN2 HEY78QUIOFMP[] THANKS BRO AHAHA
[23:31] Wizard: haha ok m8
[23:31] Alph4: AHAHA THANKS FOR THE KICK G7QYTBUPFKL;,'[
[23:31] Wizard: hahaha okay m8 whatever makes u think ur better at the game
[23:32] Alph4: I mean, I just had a bad game? But you can't take that in consideration. Because you're a fucking ape. Please. Do us a favour. Learn to use your inside voice.
[23:32] Wizard: haha i mean u being such a shit cunt and generaly ebing shit at the gamer idc ur all around shit
[23:32] Alph4: And now put people down for having a bad game.
[23:32] Wizard: i can tell by what u buy when u buy it and how uj play
[23:32] Alph4: I play support yes?
[23:33] Wizard: support??? in cs ok m8
[23:33] Alph4: Yes?
[23:33] Wizard: ur fucken stupid
[23:33] Alph4: Says the one using "ur"
[23:33] Wizard: geez
[23:33] Alph4: and "ok" nice "coz" "u" Jesus fucking Christ. Must of gone to a public school smh.
... keep reading on reddit ➡
Entries are listed by date posted, with the exception of the initial handful of items, which were all posted on the same date to this post. All websites listed will fall under one of the following two categories:
Reference: Reference material pertinent to the subject at hand
DIY: DIY information and resources pertinent to the subject at hand
Note: If an entry warrants it, the entry may be posted under both the Reference and DIY sections.
If you’d like to add something to this list please do so by providing a link to the website or information source in the comments section.
Mods, this list will be updated as needed as an entirely new post subject to my personal availability and volume of additional new material. Please do not sticky.
Reference
3/19/20
“A low oxygen consumption pneumatic ventilator for emergency construction during a respiratory failure pandemic”
Article details creation of a DIY ventilator using a pneumatic cylinder and ambu bag. There is much technical information on the subject to be gleaned from this article.
https://onlinelibrary.wiley.com/doi/full/10.1111/j.1365-2044.2009.06207.x
3/19/20
“Simple Respiratory Protection—Evaluation of the Filtration Performance of Cloth Masks and Common Fabric Materials Against 20–1000 nm Size Particles”
Important article describes various types of fabric and their effectiveness against aerosolized particulates.
https://academic.oup.com/annweh/article/54/7/789/202744
3/19/20
“Personal Protective Equipment Supply Chain: Lessons Learned from Recent Public Health Emergency Responses”
Describes major shortcomings supply chains for medical PPE during times of disaster.
https://www.liebertpub.com/doi/10.1089/hs.2016.0129
3/19/20
“Simple Respiratory Mask”
Describes a methodology find using a simple T-shirt to form a particular respiratory filtration mask. Also details shortcomings in fitting such a mask to a person’s face.
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3373043/
3/19/20
“3D Printing Against Coronavirus: Who And How To Help”
A long link filled article with tons of good resources to both reference material and DIY information.
https://www.fabbaloo.com/blog/2020/3/18/3d-printing-against-coronavirus-who-and-ho
... keep reading on reddit ➡
Hey everyone, I’ve been doing my research slowly and I’ve finally made a little list of what I think would be a good setup to start out with. I appreciate any and all help and i hope I did enough research to abide by the subreddits posting guidelines, thanks again!
I plan on growing 3-4 plants at a time, the strain is not yet decided but I’ll be going with autos instead of photos, I decided that because since I’m a beginner I’d really like to be able to have as easy of a grow to start out with and autos seemed to appeal more to that side.
Grow tent: Vivosun 48”x48”x80” Mylar hydroponic grow tent with observation window
LED light: Sunraise 1000w LED grow light full spectrum(will be buying 1 at first, since I can’t pay $400 right now for a good light I will be buying 2 of these eventually)
Ventilation: Vivosun 6 inch 440 CFM inline fan with speed controller
Medium: I plan on using Fox Farms Fx14054 happy frog potting soil 12 quart(if you have any suggestions for the easiest soil to use from sprout to harvest please let me know)
Nutes: Fox Farm liquid nutrient trio soil formula
Wall clip on fan: Genesis 6-inch clip convertible table top and clip fan
Thermometer gauge: Acurite 00613 indoor thermometer and hydrometer with humidity gauge
PH control: General hydroponics ph control kit(this is probably the 1 part I’m not confident in, any better suggestions to keep ph under control?)
Pots: I have not decided on what to use yet, I was wondering if anyone has advice on a way to maybe start the grow in the pot you’ll still be using when you harvest(if it’s better to start small and move up though please let me know)
This grow will be done in a 2 bed apartment with it own room, smell or lack there of is pretty important to me, and thank you to everyone who uses this sub I have learned so much from you all and can not wait to join you!
If there’s anything wrong with this post please let me know!!!!!
Original here.
___
The jacket was itchy and rough. It had long sleeves which were so long they would go past your hands and around to your back. The nurses would always used it to tie me up. I couldn't move no matter how hard I tried, and it made me feel so scared.
But today the kind nurse was letting me out! His name is James. He is a very big man, almost twice my size. He went behind me with a key and undid the knots, freeing my hands. I felt so much better.
"Thank you!" I shouted.
James nodded. He looked very sad, and angry at the same time.
"What happened, James?"
He shook his head. "Listen, Timmy. This is going to be the last time I see you. Be good, and do what the soldiers say, okay?"
I looked around, and realised that this wasn't anywhere in the hospital that I recognised. There were other men in the jackets, who were being released as well. The room had identical grey walls all around, which were the same colour as the ground. It looked like the whole room was made up of ground, actually. We were all seated in benches, facing a whiteboard that could roll around. Many khaki green bags were piled up on the floor in front, beside a door.
It wasn't unusual. Sometimes, I will fall asleep and wake up in a completely different place. I wouldn't remember how I got there, but it was okay because it was always inside the hospital.
"I'm scared," I whispered.
"I know," he said. "Get Jack to protect you, okay?"
"Okay."
Jack was one of my roommates, Dr. Robinson said. We would take turns being in charge while the others slept. He was also the baddest and meanest of them all. Dr. Robinson said that he was the reason we had to wear the uncomfortable jacket all day, because he had hurt a lot of people.
"Boarding time!" A man in military uniform shouted. He was carrying a backpack that looked too large for him and had a rifle slung in front of him. "Single file. Grab your parachutes and suit up." The other men stood up and walked to the front, picking up some of the bags and started strapping themselves in.
"It's time to go," James said.
I didn't want to leave, but I knew I had to. Dr. Robinson said grown boys don't fuss around, so I got up quietly. I got to the front and was worried I wouldn't know how to wear the bag, but it was actually really easy. I got stuck for a little while, but one of the soldiers helped me with it. I than
... keep reading on reddit ➡
https://en.wikipedia.org/wiki/Bushfires_in_Australia
Currently 5.9M ha.
Second on the list, the 1849 fires (5M ha) were fought on horse and carriage and had very few containment lines in place to control them.
Most of the other large area fires (notably 1974 [4.5M ha] and 84 [3.5M ha]) were mostly grassland fires that were caused by overly wet conditions turning the desert to combustibles.
The closest comparable event is the 1938/39 Black Friday fires [2M ha] which burnt out a 3rd of the area that has burnt now and had significantly less technology to fight them.
Hey, so as the titles says, I am 18 and am starting basic training for aus army at the end of this month. Seeking any advice on what I can do now to boost my income. I wont be spending much money as I go through training which will take approximately 5 months all up.
Thanks in advance.
^- ^WW2 ^Tweets ^from ^1942 ^(@RealTimeWWII) ^| ^January ^14, ^2020
So, given that probably 90% of this sub is American, a lot of the information for us Aussies isn’t very relevant. Especially so since Tandy shut down its Australian store, the go to advice to start at Tandy can mean long lead times to get stuff shipped.
So, I’m going to share what I know with this sub for anyone who searches where to get supplies in Australia. Feel free to chime in if you have any other ideas.
Keep in mind I’m an amateur and my knowledge of the industry is nothing compared to someone who’s been doing it for a while.
First off is Birdsall Leather in Sydney. This is my go to because this is where I got my first lessons in leather crafting. The website is really old and navigation and search could use some work but the staff are super helpful and knowledgeable. Seriously, go in on a Saturday morning and they are fielding phone calls and answering questions like champions.
They are the people for tanning kangaroo and they have a good selection of colours.
Second is Tandy Australia . They ship out of America now. Lead times are really long.
Annoyingly the electrical tools are in 120v so you’ll need a step down transformer. Jaycar sells them for fifty bucks.
Leffler is based out of Melbourne. Delivery times are OK.
Gameco in Auburn is a weird company that sells commercial gas fittings. They are also suppliers of Bladesmithing tools like proper 72x2 sanding belts and knife blanks. It has a sister website called artisan supplies. Stocks are limited, but they sell sewing machines and tiger thread.
leather circle. Based out of Vic. Never been there, just stumbled across them searching.
Feel free to add anything.
I've got pics of my route clearance vehicles that were destroyed in a fire. Would it be ok to post them on Reddit, maybe even this subreddit?
E: thanks for the advice! I guess I'll refrain from posting these publicly for now.
I just think that the information would come in handy
Entries are listed by date posted, with the exception of the initial handful of items, which were all posted on the same date to this post. All websites listed will fall under one of the following two categories:
Reference: Reference material pertinent to the subject at hand
DIY: DIY information and resources pertinent to the subject at hand
Note: If an entry warrants it, the entry may be posted under both the Reference and DIY sections.
If you’d like to add something to this list please do so by providing a link to the website or information source in the comments section.
Mods, this list will be updated as needed as an entirely new post subject to my personal availability and volume of additional new material. Please do not sticky.
Reference
3/19/20
“A low oxygen consumption pneumatic ventilator for emergency construction during a respiratory failure pandemic”
Article details creation of a DIY ventilator using a pneumatic cylinder and ambu bag. There is much technical information on the subject to be gleaned from this article.
https://onlinelibrary.wiley.com/doi/full/10.1111/j.1365-2044.2009.06207.x
3/19/20
“Simple Respiratory Protection—Evaluation of the Filtration Performance of Cloth Masks and Common Fabric Materials Against 20–1000 nm Size Particles”
Important article describes various types of fabric and their effectiveness against aerosolized particulates.
https://academic.oup.com/annweh/article/54/7/789/202744
3/19/20
“Personal Protective Equipment Supply Chain: Lessons Learned from Recent Public Health Emergency Responses”
Describes major shortcomings supply chains for medical PPE during times of disaster.
https://www.liebertpub.com/doi/10.1089/hs.2016.0129
3/19/20
“Simple Respiratory Mask”
Describes a methodology find using a simple T-shirt to form a particular respiratory filtration mask. Also details shortcomings in fitting such a mask to a person’s face.
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3373043/
3/19/20
“3D Printing Against Coronavirus: Who And How To Help”
A long link filled article with tons of good resources to both reference material and DIY information.
https://www.fabbaloo.com/blog/2020/3/18/3d-printing-against-coronavirus-who-and-ho
... keep reading on reddit ➡