Attribute–value Pair Puns

I cannot figure out why I am not getting products filtered the way I expect them to. I want to get a list of products in the 'Men' category, that contain:

---

Size: 43

Textile-Type: Mongolian Silks

---

Here's what I'm getting:

1. /product-category/men/?pa_size-man-shoes-eu=43 - shows all shoes for men with attribute - size: '43'; this is OK
2. /product-category/men/?pa_textile-type=mongolian-silks - shows all shoes for men with attribute - textile type: 'mongolian silks'; this is OK
3. /product-category/men/?pa_size-man-shoes-eu=43&pa_textile-type=mongolian-silks - SHOULD show shoes for men with attribute - size: '43' AND attribute - textile type: 'mongolian silks'.

I am however getting the same list of products in #3 as in #2, despite one of the products not containing the size '43'. Why is that? Is there a setting in Wordpress that I can adjust to get the desired result from this URL?

Hello,

I'm currently setting up a tacacs server and I got everything working besides limiting access of a specific user group. I'm using AD for authentication.
I have read up all I could find on this topic, did some trial and error and I always end up with the highest level of privilege instead of level 5 which I limited to show commands.

I have attached a screenshot of my current settings, maybe somebody can point me in the right direction.

I'm using ClearBox TACACS+ RADIUS Server.

https://preview.redd.it/felvaqg8wtc41.png?width=947&format=png&auto=webp&s=151d6a1369f8d78e90d244ca56b926ffd154e2a3

The forum software "Invision Community" has a "View New Content" option I use often. On trying to block certain thread items, UBlock will recommend this rule:

##li.ipsPad.ipsAreaBackground_reset.ipsStreamItem_condensed.ipsStreamItem_contentBlock.ipsStreamItem:nth-of-type(3)

nth-of-type is not ideal because the list changes all the time. However I do see the target list item has an unchanging attribute data-timestamp="1569658721" Does anyone know how to make a block rule to target this?

Always be angry. If you are happy at any point, you are serving men's interests.

Women being mad is always justified. Penis bad!

Traits of an emotionally abusive HV women:

1. She demands absolute access to all of your social media accounts, finances, and all computing devices
2. She regularly lies about her own social media, finances, and computing devices
3. She makes alt social media accounts to spy on you
4. She demands you stop all contact with all other women
5. She demands you stop all contact with men who are not in an emotionally abusive High Value relationship
6. She demands you regularly 'check in' with her
7. She demands you answer all text messages immediately
8. She refuses any of your attempts at social interaction
9. She devalues you as a human being
10. She devalues your time, energy, and well being
11. She remains emotionally distant
12. She validates abuse of you due to your gender
13. She regularly talks down about all men, including you
14. She dismisses your complaints as 'overreacting' or 'gaslighting', however valid they may be
15. (New addition) She has socially crippling anger issues

I'm beginning to think FDS is a good thing. It helps contain all the toxicity of TERF and convinces these women to self-exclude from society.

I was trying to look at option prices over time and I realized it would be helpful to be able to subtract the Theta component out of the option price to make meaningful comparison of an option price over time. I was wondering if it was possible to break up the extrinsic value into individual Greeks. Something like:

Extrinsic Value = Theta + Delta + Gamma + Rho + Vega + IV

I'd like to train a model on domain-specific annotations to extract key attribute-value pairs that don't always occur in predictable patterns. Most of my data is numeric (i.e., number-unit pairs) but some is temporal and some is just text, sometimes a few words long. An example:

• The computer sampled at (/SAMPLE_RATE/)20 msec(/SAMPLE_RATE/) Intervals generating the appropriate system input and recording the system output. The entire observation period of (/OBS_PERIOD/)66.56 seconds(/OBS_PERIOD/) 3328 data point arrays both for input and output time series were simultaneously recorded on magnetic tape. Observations were first reported in (/REPORT_DATE/)late July(/REPORT_DATE/)

• To Judge the accuracy and performance of the (/TEST_SUBJECT/)constrained models(/TEST SUBJECT/) and the (/TEST SUBJECT/)unconstrained - parameter models(/TEST SUBJECT/), they are each tested with a unit step input.

Should I simply be training my own Stanford NER classifier and then use snorkel for relations? I've seen papers on more sophisticated methods and I've come across Apache cTAKES which is sort of what I think I need but not for the biomedical domain.

I'm concerned that because most of the values I want to extract are numeric, training SpaCy NER won't work because all my tags will just be around numbers. Other general question (sorry, sort of stream of consciousness here), can I train one NER model using another? Suppose I want to tag occurrences of dates as LAUNCH_DATE, TEST_DATE, LAND_DATE. Then can I use a temporal NER tag from one of the existing/baselin SpaCy classifiers as a feature for training a new NER classifier? I guess I'm sort of looking to have a hierarchy of NER tags (is that an ontology?) and hoping the predefined structure will help with the training.

I have a working set up of Freeradius, just for demo purposes, where I have a Debian server, hosting Freeradius, a separate CA server, a Cisco Catalyst switch, and some endpoint devices. EAP-TLS also works fine, but I would like to improve it a bit, leveraging the Cisco switch's multi domain authentication capabilities: assinging VOIP devices into a different VLAN, based on the response of the RADIUS server, containing a specific attribute value pair. With EAP-MD5, by explicitly defining credentials in the users.conf file, and adding a line containing

cisco-avpair = device-traffic-class=voice

it works as expected. For TLS, all I did is simply added the needed certificates into the config (eap.conf), and authentication works, I just don't know, how could I put this AVP into the request. Is there any way to do this? I could create a new certificate template for VOIP devices, or filter authentication requests based on the CN in the cert perhaps?

Hi there. Bellow is a transcription from the Hero Skill Limit section of this FAQ -> https://www.flyingfrog.net/FAQ_Docs/SOBS_FAQ_6-22-2017_Web.pdf

A Hero’s six Basic Skills - Agility, Cunning, Spirit, Strength, Lore, and Luck - are now limited to a minimum value of 1 and a maximum value of 6, regardless of Abilities, Items, Tokens, temporary modifiers, etc.
If a Hero already has a base value of 6 in a particular Skill (not including any Personal Items, Abilities, etc), and they would gain a permanent additional point in that Skill (for example, through a Random Level Up Bonus, Upgrade Chart Ability, or from a bonus during the game), the Hero may instead choose any other Skill that is not already at 6 to add the point to instead

I'm assuming two things:

1 - "Abilities" are the same as "Upgrade Chart Abilities" (or starting Abilities).

2 - If an "Upgrade Chart Ability gives a permanent additional point, it increases the attribute's Base value.

But if "Abilities" don't count towards increasing the Base value, but an "Upgrade Chart Ability" gives a permanent additional point, then what is an "Ability" that gives a skill attribute WITHOUT increasing its Base Value?

I recently installed the Graylog virtual appliance at home to track some of my home servers and applications. I use Splunk at work and some of the apps I'm using are designed to log in a way that Splunk easily ingests: attribute=value pairs. For example, source_ip="10.1.3.1" url="https://www.widget.com/login.html"

I have heard that Graylog can automatically parse the attributes, much like Splunk does. But, I have not figured out how to enable that. Basically I want to run queries based on those automatically extracted attributes, and do things like pull the hostnames out of URL values.

Any pointers are appreciated.

So I want to save the exact values that I have right now in my patch. How can I do it? I know that if I save it, the next time I open the patch it will reset everything. How can I stop that?

https://preview.redd.it/0v6mr35s6z781.png?width=626&format=png&auto=webp&s=faa251d7447ea9f9d78c813acdafb46c7a398b6a

I have tried ATTSYNC, BATTMAN, and "reset block" from the right click context menu and cannot for the life of me figure out how to reset a block with attributes to its default state.

Edit: some good suggestions here but I will add one thing that ended up working for me. I went into block editor and made a new copy of the attirbute in question, gave it a new tag name, and deleted the old attribute tag. After saving and exiting the values reset to the new default I just made. Afterwards I changed the tag back to what it was before named before.

I am not asking for the set of possible values (domain) but the values actually taken for an attribute in a given table. For example, in math, the set of values taken by a function is called the range. Is this concept useful or commonly used?

I am trying to conditionally redirect with href attribute with a ternary operator depending on a boolean value,but when the url is of third party and not of same origin, I want the redirection to happen on a new tab for which I am again using the bollean value for target={ booleanValue ? "_blank" : "" }, and also in this case i.e. when the url is of third party, I have to somehow remove the root url, for example localhost:3000/https://google.com. I want to remove root url localhost:3000 and only redirect to google.com. How can I achieve this. Please give suggestions and advice and opinion to resolve this.

Hi professional architects,

I wondered if you’d give me some suggestions and opinions on what skills and attributes you look for when hiring a practice manager for a small to medium architecture practice ie. Where there is enough work and architectural skills to warrant hiring someone to ‘manage the day to day running of the practice’ so the architects can focus on designing, specifying, project management and client liaison.

Any suggestions or thoughts would be appreciated.

For context, I’m a senior consumer marketing expert who’s trying to change careers and would like to work in the industry. (I realise the salary impact and can probably get by)

Thanks for your thoughts. (I hope this post doesn’t break the rules)

I can't find anything online to guide me and feels like I've tried everything.I'm trying to set up a Home Assistant sensor with a list of attributes.I have a payload consisting of JavaScript objects like this:

{
    "Title": "Använd endast denna",
    "Items": [
        {
            "ProductName": "crème",
            "IsStrikedOver": true,
            "InternalOrder": -4,
            "ArticleGroupId": 10,
            "ArticleGroupIdExtended": 10,
            "ProductEan": "7310861003205",
        },
        {
            "ProductName": "matlagningsgrädde",
            "IsStrikedOver": true,
            "InternalOrder": -3,
            "ArticleGroupId": 10,
            "ArticleGroupIdExtended": 10,
            "ProductEan": "7318690047490",
        }
}

I want them to show up like this in the Home Assistant sensor:

items:
  - ProductName: crème
    IsStrikedOver: true
    InternalOrder: -4
    ArticleGroupId: 10
    ArticleGroupIdExtended: 10
    ProductEan: 7310861003205
  - ProductName: matlagningsgrädde
    IsStrikedOver: true
    InternalOrder: -3
    ArticleGroupId: 10
    ArticleGroupIdExtended: 10
    ProductEan: 7318690047490

Any idea of how to go about doing that?

I'm guessing I need to iterate through the array of the object to set the right key:value pair as attributes in the Home Assistant Entity node.But can't get the function to work.Tried the following:

var payload = msg.payload;
for(var i = 0; i < payload.length; i++) {
    msg.query = payload.items[i]
}
return msg;

But I'm probably overthinking it. All help appreciated.

I was given a task at my internship:

"Add attribute "environment" to a payload dictionary and get the value from an input payload" .

There's a lot of files and folders in the project and everything's written in OOP, so the values I would need come from variables like "self.input[payload]", which is confusing because it doesn't give me hints on where to search. Do you guys have any tips on how to find these values and attributes when the projects has lots and lots of written code files?

TL;DR: What is the best way to search for definitions(values, variables, etc) in large amounts of code and files?

For reference, this is the format that is written in (You can skip it if it's too long):

---- Where values come from -- -- --

from statemachine.State import Statefrom harmonize_workflow.util.log_util import LogUtilfrom statemachine.state_machine_config import StateMachineEventfrom loggerbuild.logger import set_logger, getChildLoggerfrom entconfigparser.entconfig import func_configfrom harmonize_workflow.exception.exceptions import InvalidInputExceptionimport osfrom flask_api import statusimport requestsimport base64import datetime

class DecomCreateOrder(State):"""This class is for Creating Order in OPCX Precool Decommission workflow."""u/func_config(section='decommission_precool_create_order')u/set_logger("DecomCreateOrder")def __init__(self, **kwargs):super(DecomCreateOrder, self).__init__(**kwargs)self.input_data = kwargs['input_data']self.kwargs = kwargsconfig = kwargs['config']self.username = config['decommission_precool_create_order']['username']self.password = config['decommission_precool_create_order']['password']self.url = config['decommission_precool_create_order']['decommission_precool_create_order_url']

---- Function where I have to make changes - --- --- --- --- -- --- --- -- --- -- --- -

def create_order(self):
"""
This method is to make POST call to the API for creating order of decommission
:return:response
"""
event = "create_order"
log = getChildLogger(self.logger, "DecomCreateOrder.create_order")
log.info("Making call to insert decommission create order details")
LogUtil.dynamodb_message_update(self, f"Making call to insert decommission create order details", event)
userpass = "{0}:{1}".format(self.username, self.password)
value = base64.b64encode(bytes(userpass, "utf-8")).decode().replace('\n', '')
`headers = {'Authorization': 'Basic {}'.format(value), "content-type": "applicat

First time poster here, I hope I do it right :)

I'm trying to automate our user creation process. I've got it mostly figured out, but I'm missing just one thing:

I need to add 3 smtp addresses to "ProxyAddreses" AD attribute: smtp:user1@olddomain.com, smtp:user1@newdomain.com, SMTP:user1@o365domain.com Our SamAccountName is different than the email username (SAM: USR01, EMAIL: user1@o365domain.com)

All the parameters come from a CSV file that I have imported previously. This is what I do now and it works:

Get-ADUser $_."samAccountName" | set-aduser -add @{'ProxyAddresses'=@("SMTP:user1@o365domain.com","smtp:user1@olddomain.com","smtp:user1@newdomain.com")}

It is hardcoded on the Script, so it is not useful when I have multiple users.

I would like to do one of this 2 things:

• Have "user1" as variable and combine it with the domain inside the sentence. Something like: 'variable01' = $_.usermail (Reading usermail from the CSV file) set-aduser -add @{'ProxyAddresses'=@("SMTP:variable01@o365domain.com","smtp:variable01@olddomain.com","smtp:variable01@newdomain.com")} I think this is the best approach, but I can't make it work

• Have "SMTP:variable01@o365domain.com","smtp:variable01@olddomain.com","smtp:variable01@newdomain.com" as a variable. Something like: $proxyaddresses = "SMTP:user1@o365domain.com","smtp:user1@olddomain.com","smtp:user1@newdomain.com" set-aduser -add @{'ProxyAddresses'=@($proxyaddressess)} This way all three SMTPs are added as a block instead of 3 different lines.

I could have 3 variables (one for each proxy address) and make 3 adds inside the set-aduser, but I thinks it would be better doing it just once.

Thanks in advanced for your help!

Who has the exact amount of fame to offset the shoe's depreciation from being second hand?

Edit:

Lots of very clever people are pointing out that this might not be true due to certain theorems and functions and math type things. Well, suck it nerds - I'm famous now and I don't gotta answer to nobody

Hello. My client sells semi-trailers. There are thousands of products in their WooCommerce store (synced using Zoho). Each one has a taxonomic attribute called "Control Branch" that indicates the city where the trailer is located. The attribute values are codes like "1CA01" which means Irvine, "1CA02" which means Fontana, and so on. They want taxes to be calculated based on this attribute value, so the rate will change depending on the trailer's location. How would I go about doing this? I want to be able to look up a tax rate in WC's standard rates table. I could ignore that table altogether and just put together my own tax table using Advanced Custom Fields, but then the client would have to manually update tax rates from time to time. Thanks in advance.

Right now I'm trying to learn about and implement unit testing in a small project of mine from a little while back. I ran into a class with methods structured like the simplified/fake one below, which made writing the unit test a bit funky.

Context aside, is calling a class method like this instead of passing an argument a bad practice, and are there any other issues doing this could cause?

Also, should the method getting the value for self.fore and self.forecast be called in __init__ like this? Or should they be set as none, with the class methods called after all attributes are set to none and have the method assign a value to the attributes?

Everything appears to work correctly as is, but it felt clunky having to write a test for it without having arguments to pass. The resources that I looked at didn't structure things this way, and if it is a bad practice than I definitely want to avoid making it a bad habit accidentally. Thank you in advance!

class Forecast:

    base_url = 'www.fakeurl.com'

    def __init__(self, zipcode: int):
        self.zip = zipcode
        self.fore = self.get_forecast_week()
        self.forecast = self.extract_forecast_info()

    def get_page(self) -> requests.models.Response:
        # code to build location url from user inputs
        return requests.request('GET', location_url)

    def get_forecast_week(self) -> bs4.element.ResultSet:
        request = self.get_page()
        # code to parse through request and extract day and temperature information and return a bsr.element.ResultSet
        # temperature is extracted as a string like 'high of 55 degrees'
        return forecast_items

    def extract_forecast_info(self) -> dict[str, int]:
        forecast_items = self.get_forecast_week()
        # extract temperature values from bs4.element.ResultSet as integers and return dictionary of [day, forecast_temperature]
        return forecast_dict

Hello :)

i have this XML File:

<data>
    <email>some email</email>
    <subject>subject</email>
    <message>some message</message>
    <files>
        <fileContent Name="somename.txt">content in base64</fileContent>
        <fileContent Name="somename.txt">content in base64</fileContent>
    </files>
</data>

And i use classes to access it in my post controller:

public class XmlData
{
    public string email { get; set;}
    public string subject { get; set; }
    public string message { get; set; }
    
    [XmlArray("files")]
    [XmlArrayItem("fileContent")]
    public List<string> fileContent { get; set; } 
}

I then access the values through [fromBody] in the Post Controller. But i can't figure out how to access the attribute "Name" in the XML File.

I have a problem and I can't solve it. I have geometry points that have float attributes from 1.0-264.0. I would like to join them with a csv table by the same name field. I would like the result of such merging to be a point layer with added values from csv.

It is possible? Do you have any advice?

Thx!

https://preview.redd.it/6zsxk358si281.png?width=1030&format=png&auto=webp&s=da07f30ded87c6eba80ed0b17a2b674b0397a6db

js code:

//getting the input element
let commentInput = document.querySelector('.component-comment-input .comment-input input[name="commentInput"]');
let userName = document.querySelector(`.comment-window>#${parentCommentCardId} .user-name>.card-title`);
if (commentInput.hasAttribute('value')) {
commentInput.removeAttribute('value');
}
commentInput.setAttribute('value', `@${userName.innerText}`);
commentInput.focus();

video demonstrating the problem:

https://reddit.com/link/r1t7h7/video/2r13d5hnmr181/player

image:

https://preview.redd.it/5jptd8wbsp181.png?width=1918&format=png&auto=webp&s=fcca706f1e3b632fc5012dff2bf0a2c41d2523ec

What does everyone think about rocking two weapons with different attributes. My example is a rapier and an ice gauntlet. I love the combo, but I also feel like I may be spreading thin.

Have any of you had success using different attribute weapons?

I cannot figure out why I am not getting products filtered the way I expect them to. I want to get a list of products in the 'Men' category, that contain:

---

Size: 43

Textile-Type: Mongolian Silks

---

Here's what I'm getting:

1. /product-category/men/?pa_size-man-shoes-eu=43 - shows all shoes for men with attribute - size: '43'; this is OK
2. /product-category/men/?pa_textile-type=mongolian-silks - shows all shoes for men with attribute - textile type: 'mongolian silks'; this is OK
3. /product-category/men/?pa_size-man-shoes-eu=43&pa_textile-type=mongolian-silks - SHOULD show shoes for men with attribute - size: '43' AND attribute - textile type: 'mongolian silks'.

I am however getting the same list of products in #3 as in #2, despite one of the products not containing the size '43'. Why is that? Is there a setting in Wordpress that I can adjust to get the desired result from this URL?